Automation Engineer📣 Job Ad

About the Role

Tuwaiq Casting & Forging Company, located in Ras Tannurah, Eastern region, is seeking an experienced Automation Engineer to join its Maintenance Department. This full-time role requires 5-10 years of experience and reports directly to the Maintenance Manager. The Automation Engineer will operate at a professional level, focusing on the engineering review, design, and analysis of control systems and information technologies across the entire facility. The position serves as the subject matter expert for automation systems in melting, casting, forging, heat treatment, machining, and utilities, with a primary goal of implementing best practices and strategies to enhance overall equipment effectiveness.

Engineering and Maintenance Responsibilities

• Support the alignment, implementation, and technical delivery of the specified operational reliability level for the facility.
• Assist the maintenance department in implementing the site-wide maintenance strategy, incorporating lessons learned.
• Provide advanced troubleshooting capabilities to resolve complex technical problems and restore systems and equipment to operational condition.
• Serve as the focal point for plant automation systems, including PLCs, HMIs, SCADA, and VFDs, maintaining program and parameter backups for all such systems.
• Assist with maintenance, emergency repairs, and inspections, providing technical automation support to maintenance supervisors and technicians as assigned.
• Diagnose and troubleshoot hardware and software faults; minimize downtime by responding promptly to plant and equipment failures.
• Optimize control logics to improve plant efficiency and identify opportunities for automation improvements.
• Provide recommendations for preventive, predictive, and corrective maintenance for facility automation systems, and monitor and administer the execution of preventive maintenance plans.
• Collect and analyze engineering data, evaluate conceptual engineering plans, and prepare and assess designs and plans in accordance with specifications.
• Conduct Bad Actor and chronic Failure Elimination and Root Cause Analysis (RCA) studies as required, and follow up on the implementation of recommendations.
• Review and ensure technical proposals for outsourced automation maintenance services include a clear scope of work; oversee automation maintenance services.
• Ensure that data, drawings, and documentation received from project contractors and vendors are complete and in accordance with contract specifications.
• Review and assist in reliability methodologies including RCM, RBI, and RIS; assign equipment criticality rankings, perform failure analysis, and recommend mitigation strategies.
• Work closely with area engineers, maintenance supervisors, and planners to ensure each automation system has a maintenance plan and that required spare parts are ordered and stocked.
• Attend supplier automation integration tests, participate in factory acceptance tests, and support site-based commissioning of automation equipment and systems.
• Propose revamping and CAPEX projects, prepare scopes of work and specifications to improve facility and equipment availability, and participate in reviewing, supervising, and implementing approved projects.
• Follow Management of Change (MOC) procedures for all system or program modifications, and record maintenance activities and system changes.

EHS and Operational Excellence

• Adhere to EHS regulations and guidelines and maintain a safe working environment at all times.
• Follow EHSS safety standards, prepare Risk Assessments (RA) and Job Safety Analyses (JSA), and maintain safe performance of all work.
• Maintain safety interlocks, alarms, and emergency shutdown systems, and ensure automation systems comply with applicable safety standards and regulations.
• Contribute to reporting near misses and incidents, and participate in HAZOP studies, site inspections, audits, and investigations.
• Maintain the workplace clean and tidy at all times in line with company standards.
• Implement 5S, Total Productive Maintenance (TPM), Lean Manufacturing (LM), and Reliability Excellence (REX) for automation across the facility.

Leadership, Training, and Reporting

• Provide on-site, hands-on mentorship to newly hired automation and electrical engineers and technicians, including training, coaching, and guidance on work control and maintenance processes.
• Assist with the recruitment of experienced and competent engineers, maintenance supervisors, and technicians.
• Prepare and deliver training courses on automation systems to maintenance team members to improve skills across operations, engineering, and maintenance functions.
• Develop and maintain effective and positive relationships with a wide range of personnel.
• Support the establishment and implementation of maintenance work control and performance monitoring procedures and KPIs.
• Ensure maintenance schedules are accurately maintained and that maintenance reports are correctly entered into ERP Asset Management and communicated to all relevant focal points in a timely manner.
• Develop technical maintenance and engineering reports as requested.

Education and Experience

• Bachelor's degree in Electrical or Control Systems Engineering.
• 5-10 years of experience in a relevant industry, specifically in automation and instrumentation within melting, casting, forging, and machining facilities.
• Specialized training in instrumentation and automation.

Required Skills and Competencies

• Technical Skills:
  • Working knowledge of engineering principles and practices in automation and instrumentation for heavy industrial facilities.
  • Experience with MES, DCS, HMI, Automated Storage, PLC, Advanced Process Control (APC), Emergency Shutdown Systems (ESD), Machine Monitoring, and instrumentation devices.
  • Strong knowledge of PLCs, including Siemens 400 and 1500 Series Safety PLCs, LS PLCs, and SCADA.
  • Strong knowledge of VFDs from manufacturers such as Siemens, ABB, LS, Delta, Danfoss, and Hisolution.
  • Proficiency in TIA Programming and SCADA for Siemens PLCs, HMIs, and VFDs.
  • Proficiency in FANUC and Siemens Controllers programming for CNC machines.
  • Proficiency in Simatic Manager programming for Siemens redundant PLCs.
  • Familiarity with IBA system for problem analysis.
  • Strong knowledge of automation networks including Profinet, Profibus, Modbus, and Ethernet TCP/IP.
  • Strong understanding of electrical and control schematics.
  • Data gathering techniques for organizing and interpreting data, with the ability to compile, interpret, and apply field notes, data tables, and other information to engineering problems.
  • Computer literacy including ERP Asset Management and MS Office software.
• Behavioral Skills:
  • Strong problem-solving and analytical skills.
  • Ability to communicate effectively in English, both orally and in writing.
  • Ability to read, understand, and interpret complex technical information and documentation.
  • Ability to establish and maintain effective working relationships.
  • Ability to present research findings in clear, objective written report form.