Remote Maintenance Technician Jobs in Saudi Arabia

More than 17 Remote Maintenance Technician Jobs in Saudi Arabia. Explore detailed job descriptions, salaries, and locations. Apply and get hired today!


Category
Contract Type
Nationality

img
Field Engineer - Saudi Arabia

Field Engineer - Saudi Arabia

📣 Job AdNew

Pronto

Full-time

About the Field Engineer Role

Pronto AI is a global leader in autonomous vehicle (AV) technology, specializing in the deployment of Autonomous Haulage Systems (AHS) in mining, quarrying, and construction environments. The company's mission is to enhance the safety, intelligence, and efficiency of mining operations through advanced technology. This Field Engineer position is based at a mining site in Saudi Arabia and requires hands-on involvement in the installation, calibration, maintenance, and troubleshooting of Pronto's autonomous technology on heavy equipment. The role demands strong electrical and mechanical aptitude and comfort working in outdoor industrial settings.

Key Responsibilities

  • Install Pronto hardware and software solutions, including sensor systems, drive-by-wire kits, power integration, and vehicle interfaces on-site.
  • Set up peripheral hardware such as network stations, gate systems, and office infrastructure at customer locations.
  • Perform system calibrations and validation tests to ensure installations meet operational standards.
  • Collaborate with Engineering and Customer teams to align field deployments with specifications and contribute to R&D projects.
  • Conduct scheduled maintenance to ensure the ongoing health and performance of autonomous systems.
  • Monitor and log equipment conditions, identifying potential wear, degradation, or environmental impacts.
  • Diagnose and repair hardware, software, and connectivity issues to minimize downtime.
  • Utilize diagnostic tools and logs to identify root causes and implement effective solutions.
  • Communicate technical findings to engineering teams for analysis and improvement initiatives.
  • Serve as the primary point of contact for Pronto on-site, maintaining professional communication with customer personnel.
  • Provide basic training to customer staff on Pronto's systems as needed.
  • Document all service activities, system updates, and issues using internal ticketing and CRM tools.

Qualifications and Experience

  • A minimum of 4 years of experience in field service, automotive electronics, mechatronics, or a similar technical support role.
  • Proficiency in using hand tools, diagnostic equipment, and electrical testing tools.
  • Solid understanding of vehicle systems, including power distribution, CAN bus communication, sensor integration, and Electronic Control Units (ECUs).
  • Ability to accurately read and interpret wiring diagrams, schematics, and technical documentation.
  • Capability to work independently in field environments with minimal direct supervision.
  • Excellent interpersonal and communication skills for effective collaboration and customer interaction.

Preferred Skills and Certifications

  • Experience with Autonomous vehicle systems, Machine control, Robotics, or complex sensor integrations is preferred.
  • Familiarity with Linux-based systems and remote diagnostics is preferred.
  • Possession of OSHA 10, MSHA Part 48, or equivalent safety certification is preferred.

Work Environment and Schedule

This is a full-time, on-site role located at a mining operation in Saudi Arabia. Pronto provides accommodation during deployments. The work schedule follows a mining rotation, for example, two weeks on-site followed by one week off. This field-based position requires working in rugged mine environments and adherence to all site-specific safety and health requirements.

breifcase2-5 years

locationSaudi Arabia

Remote Job
7 days ago
Mechanical Supervisor / Service Technician - Location Saudi Arabia

Mechanical Supervisor / Service Technician - Location Saudi Arabia

📣 Job AdNew

Zeppelin Systems GmbH

Full-time

About the Role

Zeppelin Systems GmbH is seeking an experienced Mechanical Supervisor / Service Technician for its technical execution team in Al Jubail, Saudi Arabia. This role is integral to strengthening the company's capabilities in the installation, commissioning, and service of bulk material handling systems for the food and polyolefine (PE/PP) industries. The position offers significant responsibility on international installation sites, focusing on delivering high-quality commissioning and service performance for customers.

This full-time position provides an opportunity for professional growth within Zeppelin, a technology-driven company, contributing to the performance and reliability of complex production systems. The ideal candidate will possess a strong mechanical or mechatronics background and a practical approach to problem-solving.

Key Responsibilities

  • Supervise and coordinate mechanical and mechatronic installation activities for food and polyolefine (PE/PP) bulk material handling systems.
  • Lead and guide on-site installation teams and subcontractors to ensure efficient workflow and adherence to project timelines.
  • Ensure installation quality by verifying compliance with technical specifications and relevant safety standards.
  • Perform mechanical assembly, alignment, testing, and commissioning of machinery and systems to achieve operational readiness.
  • Conduct service, maintenance, troubleshooting, and repair activities at customer sites to maintain system uptime and performance.
  • Diagnose mechanical and mechatronic issues that arise during installation, commissioning, and post start-up phases.
  • Support customers by providing guidance on preventive maintenance strategies and system optimization.
  • Provide on-site and coordinate remote service support as needed to address customer requirements promptly.
  • Prepare comprehensive installation reports, service documentation, and handover protocols.
  • Support project managers with regular progress updates, risk identification, and technical feedback.
  • Train customer personnel on the proper operation and maintenance of installed equipment.
  • Ensure strict compliance with hygiene and food industry standards during all installation and service activities.

Qualifications and Requirements

  • Completed technical education in Mechanics, Mechatronics, or a related field.
  • Several years of experience in industrial plant installation and/or technical service, with a preference for experience in food bulk material handling.
  • Demonstrated ability to read and interpret technical drawings, P&IDs, and installation layouts.
  • Proven experience supervising small teams or subcontractors effectively.
  • A high level of responsibility, reliability, and a structured working style.
  • Strong communication skills and a customer-oriented mindset.
  • Willingness to travel within Arabia (GCC Countries) and work on international installation and service sites.

Required Skills

  • Mechanical Installation
  • Commissioning
  • Service and Maintenance
  • Troubleshooting and Repair
  • Mechanical Systems Expertise
  • Rotating Equipment Knowledge
  • Pneumatics Systems Understanding
  • Basic Electrical Interface Knowledge
  • Technical Drawings Interpretation
  • P&IDs Interpretation
  • Installation Layouts Interpretation
  • Problem-Solving Abilities
  • Team Supervision
  • Customer Support
  • Experience with Food Bulk Material Handling Systems
  • Experience with Polyolefine (PE/PP) Bulk Material Handling Systems
  • Good English language proficiency; additional languages are considered an advantage.

Work Environment and Experience

This position is a full-time role based in Al Jubail, Saudi Arabia. It requires 5-10 years of experience in industrial plant installation and/or technical service, with a focus on bulk material handling systems. The role involves travel within GCC countries and working on international installation and service sites. The position offers a key technical role with significant responsibility for installation quality, service performance, and customer satisfaction, within a growing, technology-driven environment.

breifcase5-10 years

locationAl Jubail

Remote Job
about 21 hours ago
Electronic Technician

Electronic Technician

📣 Job AdNew

Cubic Corporation

Full-time

About the Role

Cubic Defense, a business unit of Cubic Corporation, is seeking an Electronics Technician to provide essential operation and maintenance support for the P-4 SAKITS pods. This critical role supports the Royal Saudi Air Force (RSAF) F15C/D Air Combat Maneuver & Instrumentation (ACMI) program. Reporting to the Site Manager and working closely with Field Service Technicians, the Electronics Technician will operate with a high degree of independence, requiring minimal supervision. Cubic Corporation is a global leader in creating and delivering technology solutions that simplify daily journeys in transportation and enhance mission success and safety in defense.

Key Responsibilities

  • Maintain a comprehensive log detailing the serial number, pod type, date, time, and remarks for all P-4 SAKITS pods checked in and out of the P-4 SAKITS pod shop.
  • Generate and maintain a daily status and availability log for all P-4 SAKITS pods.
  • Record elapsed Time Meter readings on a monthly basis to determine each pod's operational time for the month.
  • Operate and maintain the P-4 SAKITS Test Set in strict accordance with applicable technical documentation.
  • Perform Organizational-Level (O-Level) and Intermediate-Level (I-Level) maintenance tests on P-4 SAKITS pods.
  • Replace Shop Replaceable Assemblies (SRAs) on P-4 SAKITS pods as required.
  • Provide assistance as needed in the operation and maintenance of display equipment.
  • Perform duties of a computer operations technician, including loading programs for operation and testing.
  • Conduct subsystem tests to assess operational readiness.
  • Load all pre-mission exercise data into the Data Transfer Device (DTD).
  • Maintain a control log for the issuance and receipt of DTDs to and from aircrews.
  • Operate graphics terminals during live exercises and assist with display and control operations.
  • Offer technical assistance to RSAF personnel or aircrews during the setup for replay and debriefing sessions.
  • Maintain and store records of mission tapes.
  • Maintain a mission event log, entering specific, concise, and pertinent data under headings for date, time, mission/event, remarks, and operator.
  • Interface directly with the RSAF to discuss mission sortie effectiveness.
  • Perform additional operations duties as directed by the Site Supervisor.
  • Comply with Cubic's values and adhere to all company policies and procedures, including the code of conduct, quality, security, and occupational health, safety, and environmental policies.
  • Support the setup of project equipment when required.
  • Collaborate as a team member, supporting colleagues to ensure the successful provision of services to the customer.

Qualifications and Requirements

  • Previous experience in a similar role is required.
  • Demonstrated ability to comply with company standard practices as they apply to field assignments.
  • Proven ability to adapt to a remote and/or foreign environment.
  • Ability to work with military personnel.
  • Ability to work with foreign personnel.
  • Ability to work in confined spaces.
  • Ability to lift 75 pounds.
  • Possession of a college qualification in a technical-related field, or equivalent technical education and military experience.
  • Ability to obtain (or currently possess) RSAF security clearance, which includes a background check.

Required Skills

  • Proficiency in operating and maintaining P-4 SAKITS pods and the P-4 SAKITS Test Set.
  • Skilled in performing Organizational-Level (O-Level) and Intermediate-Level (I-Level) maintenance and replacing Shop Replaceable Assemblies (SRAs).
  • Experience with computer operations, including loading programs and performing subsystem tests.
  • Competence in managing Data Transfer Devices (DTDs), including loading pre-mission data and maintaining control logs.
  • Ability to operate graphics terminals and assist with display and control operations during live exercises.
  • Strong technical assistance capabilities, particularly for RSAF or aircrews.
  • Excellent record-keeping and logging skills for various operational data.
  • Effective communication and interface skills with military personnel and stakeholders.
  • Adherence to company policies, values, and procedures.
  • Teamwork and collaboration skills.
  • Adaptability to remote and challenging work environments.
  • Good interpersonal skills with the ability to communicate efficiently and flexibly.
  • Capability to work effectively under pressure.
  • A focused, conscientious, and self-motivated work ethic.

Work Environment and Location

This is a full-time position. The role is based in Dhahran, Eastern Province, Saudi Arabia. The position requires the ability to work with military and foreign personnel, adapt to a remote environment, and potentially work in confined spaces. Desirable qualifications include certification of English comprehension by TOEFL or STEP Test, or other KSA-recognized exams, and an Engineering Degree specializing in Electronics, Avionics, or Communication.

breifcase0-1 years

locationDhahran

Remote Job
5 days ago
AC Mechanic

AC Mechanic

📣 Job Ad

Smit Lamnalco

Full-time

About the Role

Smit Lamnalco, a part of the Boskalis group, is seeking an AC Mechanic to join its team in Jīzān, Saudi Arabia. This role is essential for ensuring the optimal functioning, maintenance, and repair of air conditioning systems across the company's fleet of marine vessels. Smit Lamnalco is committed to delivering exceptional marine support services and values its people as central to its success, operating in a challenging, dynamic, and international environment that emphasizes teamwork and dedication.

As an AC Mechanic, you will be instrumental in maintaining the comfort and operational efficiency of the vessels by ensuring all air conditioning systems are in proper working order. This position offers the opportunity for skill development within a leading international marine company.

Key Responsibilities

  • Install, inspect, maintain, and repair air conditioning systems on various marine vessels.
  • Diagnose and troubleshoot air conditioning system issues, identifying root causes and proposing effective solutions.
  • Perform regular maintenance checks to ensure optimal performance and prevent potential breakdowns.
  • Monitor refrigerant levels, pressures, and temperature controls to ensure compliance with industry standards.
  • Maintain accurate records of maintenance activities, repairs, and parts usage.
  • Assist with vessel equipment and machinery repairs when necessary.

Required Qualifications

  • Proven experience as an AC Mechanic, preferably in a marine or similar environment.
  • A minimum of 5 years of relevant experience is required.
  • Strong technical knowledge of air conditioning systems, components, and refrigerants.
  • Proficiency in proper refrigerant handling and disposal procedures.
  • Ability to read and interpret technical diagrams, blueprints, and manuals.
  • Strong diagnostic skills to identify and resolve complex AC system issues.
  • Knowledge of safety protocols and regulations related to AC maintenance in a marine environment.
  • Physical fitness and the ability to work in confined spaces and challenging conditions.
  • Willingness to travel at short notice across Saudi Arabia.

Essential Skills

  • AC Mechanic Expertise
  • Air Conditioning Systems Knowledge
  • Refrigeration & Air Conditioning Principles
  • Familiarity with the Marine Environment
  • Technical Diagram Interpretation
  • Blueprint Reading
  • Manual Comprehension
  • Diagnostic Skills
  • Adherence to Safety Protocols
  • Teamwork Capabilities
  • Problem-Solving Abilities

Work Schedule and Location

This is a full-time position based in Jazan, Saudi Arabia. The role operates on an 18-weeks-on, 9-weeks-off rotation. Smit Lamnalco offers opportunities for career development within a dynamic and international setting.

breifcase5-10 years

locationJazan

Remote Job
7 days ago
AC Mechanic

AC Mechanic

📣 Job Ad

Boskalis

Part-time

About the AC Mechanic Role

Boskalis, a prominent international marine services provider, is seeking a skilled AC Mechanic to join their team in Jīzān, Saudi Arabia. This role is essential for maintaining and repairing the air conditioning systems on the company's marine vessels, contributing directly to operational efficiency. You will be part of a diverse team of experts, working in a dynamic environment to support the company's success.

Key Responsibilities

  • Install, inspect, maintain, and repair air conditioning systems across various marine vessels.
  • Diagnose and troubleshoot air conditioning system issues, identifying root causes and implementing effective solutions.
  • Conduct regular maintenance checks to ensure optimal system performance and prevent breakdowns.
  • Monitor refrigerant levels, pressures, and temperature controls to ensure adherence to industry standards.
  • Maintain detailed records of all maintenance activities, repairs, and parts used.
  • Assist in the repair of other vessel equipment and machinery as needed.

Required Qualifications and Experience

  • Minimum of 5 years of proven experience as an AC Mechanic, preferably in a marine or similar operational setting.
  • Strong technical understanding of air conditioning systems, their components, and refrigerant handling procedures.
  • Ability to interpret technical diagrams, blueprints, and manuals.
  • Proficient diagnostic skills for resolving complex air conditioning system issues.
  • Knowledge of safety protocols relevant to AC maintenance in a marine environment.
  • Physical fitness and capability to work in confined spaces and challenging environmental conditions.
  • Willingness to travel on short notice within Saudi Arabia.

Essential Skills

  • Air Conditioning System Maintenance and Repair
  • Refrigerant Handling and Management
  • Technical Diagram, Blueprint, and Manual Interpretation
  • Diagnostic and Troubleshooting Expertise
  • Adherence to Safety Protocols and Regulations
  • Marine Environment Operations
  • Working in Confined Spaces
  • Adaptability to Challenging Conditions
  • Teamwork and Collaboration
  • Problem-Solving

Work Arrangement and Location

This is a part-time role based in Jīzān, Saudi Arabia. The work schedule follows an 18-weeks-on, 9-weeks-off rotation. Interviews may be conducted online or in the office.

breifcase5-10 years

locationJazan

Remote Job
7 days ago
Instrument & Analyzer Technician

Instrument & Analyzer Technician

📣 Job Ad

Intech Automation & Intelligence

Full-time

About the Role

Intech Automation & Intelligence is seeking a skilled Instrument & Analyzer Technician to join its Operations and Maintenance (O&M) Field Services team in Al Khobar, Eastern Saudi Arabia. This role supports key industries including Oil & Gas, Petrochemicals, and Utilities, contributing to the deployment and maintenance of advanced solutions for resident, on-call, and remote O&M services. The position is integral to transformative projects that utilize advanced technologies to streamline industrial processes and uphold Intech's commitment to product delivery excellence and operational reliability.

Key Responsibilities

  • Manage the installation, maintenance, calibration, and troubleshooting of process analyzers.
  • Perform maintenance and troubleshooting on specific analytical instruments, including Gas Chromatographs, Emerson Micro Motion Coriolis meters, Fork Density meters, and GE Ultrasonic Flow Meters.
  • Conduct preventive maintenance to ensure optimal performance of instrumentation and analyzer systems.
  • Execute remedial maintenance and respond to call-outs for urgent repairs and troubleshooting.
  • Ensure all instrumentation and analyzer activities adhere to industry standards and safety protocols.

Qualifications and Requirements

  • A minimum of 6 years of experience in preventive maintenance, remedial maintenance, and call-out services within the Oil & Gas sector.
  • A minimum Diploma of Associate Engineering (DAE) in Electronics.
  • A preferred 2-year apprenticeship in instrumentation.
  • Strong understanding of various process control instruments, including pressure, temperature, level, and flow sensors.
  • Experience with analytical instruments such as gas chromatographs, Emerson/GE density analyzers, and other process analyzers.
  • Proficiency in calibrating and maintaining instruments according to industry standards.
  • Expertise in diagnosing faults in sensors, transmitters, and analyzers, and replacing defective components.
  • Capability to perform loop checking to ensure proper communication between field instruments and control systems.
  • Familiarity with PLC/DCS & SCADA systems, including control logic, signal transmission, and communication protocols like HART, Modbus, and Profibus.
  • Experience working with gas detection systems for hazardous environments.
  • A basic understanding of pneumatics and hydraulics within instrumentation systems.
  • Knowledge of safety and hazardous area equipment, including explosion-proof, intrinsically safe designs, and hazardous area classifications.
  • Ability to read and interpret technical drawings and documentation, such as P&IDs, loop diagrams, wiring schematics, and technical manuals.
  • Demonstrated problem-solving skills for quick and efficient troubleshooting of instrument failures.
  • A high level of attention to detail to ensure precise calibration and installation.
  • Effective communication skills for coordinating with engineers, operators, and management.
  • Strong time management skills to effectively manage multiple tasks.
  • A collaborative teamwork ethic, working effectively with maintenance and operations teams.

Required Skills

  • Preventive Maintenance
  • Remedial Maintenance
  • Call Outs
  • Instrumentation Knowledge (pressure, temperature, level, flow sensors)
  • Analytical Instruments (Gas Chromatographs, Density Analyzers, etc.)
  • Calibration & Maintenance
  • Troubleshooting & Repair
  • Loop Checking
  • PLC/DCS & SCADA Systems
  • Gas Detection Systems
  • Pneumatics & Hydraulics
  • Safety & Hazardous Area Equipment
  • Technical Drawings & Documentation Interpretation
  • Problem-Solving
  • Attention to Detail
  • Communication
  • Time Management
  • Teamwork

Work Environment and Additional Information

This is a full-time position for an Instrument & Analyzer Technician based in Al Khobar, Eastern Saudi Arabia. Intech Automation & Intelligence is a globally recognized industrial automation and digitalization technology company with nearly 30 years of experience partnering with major oil and gas organizations. The company is an Equal Opportunity Employer committed to diversity and inclusion.

breifcase5-10 years

locationAl Khobar

Remote Job
10 days ago
Technician, SCADA

Technician, SCADA

📣 Job Ad

Eram Talent

Seasonal

About the Role

Eram Talent is seeking a skilled Technician, SCADA for a contract position within a leading organization located in Yanbu, Al Madinah, Saudi Arabia. This role is essential for ensuring the efficient and reliable operation of industrial processes and infrastructure through the management of Supervisory Control and Data Acquisition (SCADA) systems. The successful candidate will possess a strong technical background in control and instrumentation or industrial automation, with the capability to manage the installation, maintenance, and troubleshooting of complex SCADA systems.

Key Responsibilities

  • Install, configure, and maintain SCADA hardware and software components to ensure optimal system performance.
  • Continuously monitor SCADA systems to guarantee uninterrupted and stable operation.
  • Perform SCADA system monitoring and operation tasks as required.
  • Conduct troubleshooting and incident response for SCADA-related issues.
  • Provide support for Programmable Logic Controllers (PLCs) and Remote Terminal Units (RTUs).
  • Offer communication and network support for SCADA infrastructure.
  • Manage alarms effectively and respond to alerts.
  • Conduct both corrective maintenance (CM) and preventive maintenance (PM) activities.
  • Execute regular preventive maintenance and system updates to maintain peak system efficiency.
  • Collaborate with engineers and operations teams to implement system improvements and upgrades.
  • Maintain comprehensive documentation of SCADA configurations, maintenance activities, and incident reports.
  • Ensure strict adherence to safety standards and organizational policies.

Qualifications and Requirements

  • Possess a technical diploma in control and instrumentation or industrial automation.
  • Minimum of 5 years of experience working with SCADA systems within an industrial environment.
  • Demonstrated experience in SCADA system monitoring and operation.
  • Proven ability in troubleshooting and incident response, including PLC and RTU support, communication and network support, and alarm management.
  • Experience in conducting both corrective and preventive maintenance (CM & PM) activities.
  • Excellent problem-solving skills with a keen attention to detail.
  • Good communication skills, enabling effective collaboration within a team environment.
  • Willingness to work flexible hours, including providing on-call support as needed.

Required Skills

  • SCADA Systems
  • SCADA Hardware and Software Components
  • SCADA System Monitoring & Operation
  • Troubleshooting & Incident Response
  • PLC and RTU Support
  • Communication and Network Support
  • Alarm Management
  • Corrective and Preventive Maintenance (CM & PM) Activities
  • Problem-Solving Skills
  • Attention to Detail
  • Communication Skills
  • Teamwork

Work Environment and Location

This is a contract position based in Yanbu, Al Madinah, Saudi Arabia, with the primary work location in Yanbu and Medina. The role requires flexibility in working hours, including on-call support when necessary.

breifcase5-10 years

locationMadinah

Remote Job
7 days ago
Technician, SCADA

Technician, SCADA

📣 Job Ad

Eram Talent

Seasonal

About the Role

Eram Talent is seeking a skilled Technician, SCADA to join a leading organization in Yanbu, Al Madinah, Saudi Arabia. This role is crucial for ensuring the efficient and reliable operation of industrial processes and infrastructure through the management of Supervisory Control and Data Acquisition (SCADA) systems. The position involves hands-on installation, ongoing maintenance, and proactive troubleshooting of these critical systems. This is a contract position requiring 5-10 years of experience, with primary work located in Yanbu, Al Madinah, Saudi Arabia, and potential work in Medina.

Key Responsibilities

  • Install, configure, and maintain SCADA hardware and software components to ensure optimal system functionality.
  • Monitor SCADA systems continuously to guarantee stable and uninterrupted operation.
  • Perform SCADA system monitoring and operation tasks as required.
  • Conduct troubleshooting and incident response for SCADA-related issues.
  • Provide support for Programmable Logic Controllers (PLCs) and Remote Terminal Units (RTUs).
  • Offer communication and network support for SCADA infrastructure.
  • Manage alarms effectively and respond to alerts.
  • Conduct both Corrective Maintenance (CM) and Preventive Maintenance (PM) activities for SCADA systems.
  • Perform regular preventive maintenance and system updates to ensure peak system performance.
  • Collaborate with engineers and operations teams to implement system improvements and upgrades.
  • Maintain detailed documentation of SCADA configurations, maintenance activities, and incident reports.
  • Ensure strict compliance with safety standards and organizational policies.

Qualifications and Requirements

  • A technical diploma in Control and Instrumentation or Industrial Automation.
  • A minimum of 5 years of experience working with SCADA systems within an industrial environment.
  • Proficiency in SCADA system monitoring and operation.
  • Strong capabilities in troubleshooting and incident response.
  • Experience providing support for PLCs and RTUs.
  • Experience offering communication and network support for SCADA systems.
  • Expertise in alarm management.
  • Capability to conduct both CM and PM activities.
  • Excellent problem-solving skills and a keen attention to detail.
  • Good communication skills and the ability to work collaboratively within a team environment.
  • Willingness to work flexible hours, including on-call support as needed.

Required Skills

  • SCADA Systems
  • SCADA Hardware and Software Components
  • SCADA System Monitoring & Operation
  • Troubleshooting & Incident Response
  • PLC and RTU Support
  • Communication and Network Support
  • Alarm Management
  • Corrective and Preventive Maintenance (CM & PM) Activities
  • Problem-Solving
  • Attention to Detail
  • Communication Skills
  • Teamwork

Work Location and Type

The primary work location for this role is in Yanbu, Al Madinah, Saudi Arabia, with potential work also occurring in Medina. This is a contract position.

breifcase5-10 years

locationMadinah

Remote Job
10 days ago
B1 Mechanical Technician

B1 Mechanical Technician

📣 Job Ad

Airbus Helicopters

Full-time

About the Role

Airbus Helicopters Arabia for Aircraft Maintenance is seeking a * Mechanical Licensed Engineer to join their mobile support team. This is a full-time, fixed-term position based in Riyadh, Saudi Arabia, requiring frequent travel across the Africa and Middle East (AME) region. The role involves serving as a front-line technical expert to provide crucial support to customer operations, ensuring the highest standards of safety and availability for heavy twin-engine helicopters in diverse environments.

Key Responsibilities

  • Perform scheduled (Base/Line) and unscheduled maintenance, troubleshooting, and defect rectification on H225, Caracal, and Super Puma helicopter families.
  • Deploy on short-notice missions to customer sites to provide essential technical assistance, Aircraft On Ground (AOG) support, and specialized repairs.
  • Certify all maintenance work performed in strict accordance with EASA Part 145 standards or equivalent local Civil Aviation Authority regulations, and company Quality Management Systems.
  • Act as a technical ambassador, providing guidance and support to customer maintenance teams to ensure operational continuity.
  • Uphold a "Safety First" culture, ensuring all tooling, parts, and procedures meet rigorous aviation safety and quality standards.

Qualifications and Requirements

  • Possess a valid EASA Part 66 * License or an equivalent certification.
  • Hold current Type Ratings mandatory for H225 (EC225LP) and/or AS332 (L1, L2, C1).
  • Have a minimum of 5 years of hands-on maintenance experience specifically on the H225, Caracal, and Super Puma helicopter types.
  • Demonstrate high flexibility for frequent travel and short-term assignments across the Africa and Middle East region.
  • Exhibit proficiency in English, both technically and spoken.

Skills and Competencies

  • Extensive knowledge and practical experience with H225, Caracal, and Super Puma helicopters.
  • Proficiency in troubleshooting and defect rectification procedures.
  • Capability to provide effective AOG support and perform specialized repairs.
  • Adherence to EASA Part 145 regulations and company Quality Management Systems.
  • Strong customer liaison and communication skills.
  • Commitment to maintaining a robust safety culture.
  • Competence in tooling and parts management.
  • Expertise in upholding aviation standards.
  • Excellent problem-solving abilities.
  • Demonstrated resilience in high-pressure environments.
  • High degree of adaptability to diverse cultural and operational settings.
  • Proven autonomy and the ability to make sound technical decisions independently.

Additional Information

French language proficiency is considered a significant advantage. Additional Type Ratings on other Airbus Helicopters (*, H145, H135, or AS365/H155) are considered a plus. Experience with military variants (Caracal/Cougar) and mission-specific equipment is advantageous. Proven ability to work independently in remote or austere environments is highly valued. This role requires an awareness of potential compliance risks and a commitment to act with integrity.

breifcase5-10 years

locationRiyadh

Remote Job
10 days ago
Patriot Maintenance Engineer (Al Jubail )

Patriot Maintenance Engineer (Al Jubail )

📣 Job AdNew

Raytheon

Full-time

About the Role

Raytheon, a part of RTX, is seeking a Patriot Maintenance Engineer to join its team in Saudi Arabia. This role is essential for maintaining the operational readiness of advanced defense systems. The engineer will provide on-site technical assistance, troubleshoot, repair, and test complex electrical and electronic systems to meet specific standards. This position contributes to national defense by ensuring the functionality of critical technology.

Key Responsibilities

  • Troubleshoot and isolate malfunctions in the Patriot System using Intermediate Support Element (ISE) equipment when Built-In Test Equipment (BITE) and other machine-aided equipment are insufficient for isolation.
  • Perform repairs on critical Patriot system components including the ICC, ECS, RS, CRG, BME, BMC, IFF, AMG, GMT, and LRPT.
  • Functionally verify that major end items perform to specified standards after maintenance or repair.
  • Install authorized third echelon equipment modifications (MWO).
  • Conduct tests and System Integration and Check-Out (SICO) of modified equipment as needed.
  • Provide on-site technical assistance when required.
  • Participate in On-the-Job Training (OJT) programs and assist in enforcing safety policies, procedures, and standards.
  • Identify faulty work practices and demonstrate proper maintenance and troubleshooting techniques.
  • Prepare and submit maintenance reports and System Problem Reports (SPR's).
  • Perform other related duties as required or directed by the Section Officer.
  • Travel as requested and provide domestic on-site support outside of regular working hours, as required.

Qualifications and Requirements

  • Bachelor of Science degree in Electronics Engineering or a related specialty from an accredited university.
  • Minimum of 2 years of prior relevant experience in a similar role.
  • Knowledgeable in field maintenance, including isolating and correcting malfunctions using automatic and semi-automatic program maintenance diagnostics, unit self-tests, and built-in test equipment (BITE).
  • Proficient in troubleshooting, fault isolation, repair, and functional verification of ICC, ECS, RS, CRG, IFF, AMG, GMT, LRPT, and LS components.
  • Proficient in English.

Required Skills

  • Troubleshooting
  • Repair
  • Testing
  • Electrical/Electronic Systems
  • Maintenance Reports
  • Equipment Modifications
  • Built-In Test Equipment (BITE)
  • System Integration and Check-Out (SICO)
  • On-the-Job Training (OJT)
  • Safety Policies
  • System Problem Reports (SPR's)
  • Reading and understanding electrical and/or electronic schematics
  • Understanding of Radar Frequency (RF) theory

Work Environment and Location

This is a full-time, on-site position based in Al Jubail, Saudi Arabia. The role involves working within a team dedicated to maintaining advanced defense technology. Travel may be required to provide domestic on-site support outside of regular working hours.

breifcase2-5 years

locationRiyadh

Remote Job
1 day ago
PSAB BOSS: Plumber (Water and Fuels Systems)

PSAB BOSS: Plumber (Water and Fuels Systems)

📣 Job AdNew

KBR, Inc.

Full-time

About the Role

KBR Government Solutions is seeking a skilled and experienced Plumber (Water and Fuels Systems) to join their team at Prince Sultan Air Base (PSAB) in Riyadh, Saudi Arabia. This role is essential for delivering Base Operating Support-Installation (BOS-I) services to the 378th Air Expeditionary Wing (AEW), mission partners, and tenant units. The position involves the maintenance, inspection, and repair of critical plumbing, water, wastewater, fire suppression, and backflow prevention systems, contributing to operational readiness in a contingency environment. You will cooperate with and support * deployed forces and Kingdom of Saudi Arabia personnel, sharing information as required.

Key Responsibilities

  • Install, service, and repair all aspects of plumbing systems, including water heaters, urinals, toilets, and shower units.
  • Assemble, install, and repair pipes, fittings, and fixtures for heating, water, and drainage systems according to specifications and plumbing codes.
  • Assemble pipe sections, tubing, and fittings using couplings, clamps, screws, bolts, cement, plastic solvent, caulking, or soldering, brazing, and welding equipment.
  • Cut openings in structures to accommodate pipes and pipe fittings using hand and power tools.
  • Fill pipes or plumbing fixtures with water or air and observe pressure gauges to detect and locate leaks.
  • Hang steel supports from ceiling joists to hold pipes in place.
  • Install pipe assemblies, fittings, valves, and fixtures such as sinks and toilets.
  • Install underground storm, sanitary, and water piping systems and extend piping to connect fixtures and plumbing to these systems.
  • Locate and mark the position of pipe installations, connections, passage holes, and fixtures in structures using measuring instruments such as rulers and levels.
  • Measure, cut, and thread pipe using hand and power tools or machines such as pipe cutters and pipe-threading machines.
  • Repair and maintain plumbing, replacing defective washers, mending broken pipes, and opening clogged drains.
  • Maintain knowledge of water heaters, pop-off valves or relief valves, and heating elements related to water heaters.
  • Study building plans and inspect structures to assess material and equipment needs, establish the sequence of pipe installations, and plan installations around obstructions.
  • Review blueprints, building codes, and specifications to determine work details and procedures.
  • Observe and follow all safety rules and procedures, including wearing required personal safety equipment.
  • Provide leadership, instruction, and guidance to lower-level craftsmen and may reassign work delegated from supervisors.
  • Complete records, maintain tools and equipment, and perform various clean-up and housekeeping activities.
  • Ensure the successful delivery of services to approximately 4,000 personnel.
  • Perform other duties and activities as directed.

Qualifications and Requirements

  • High School Diploma or equivalent.
  • Must be a * Citizen.
  • Must possess a current * Driver's License.
  • Must possess a * passport book with at least 13 months of remaining validity and 6 blank visa/stamp pages.
  • Must have and maintain a valid * SECRET Security Clearance throughout the duration of the contract.
  • Must be able to read, write, speak, and understand English fluently.
  • Candidate must meet CENTCOM MOD-15 theater requirements.
  • Completion of USAF AFSC 3E4X1 Water and Fuels Systems Maintenance or other equivalent DOD school is highly desired.

Required Skills

  • Proficiency in plumbing, water and fuels systems maintenance, inspection, and repair.
  • Experience with wastewater systems and fire suppression systems.
  • Knowledge of backflow prevention systems.
  • Ability to read and interpret blueprints and understand plumbing codes.
  • Commitment to following safety rules and procedures.
  • Proficient in Microsoft Word, Excel, and Outlook.
  • Excellent interpersonal, communication, and customer service skills.
  • Strong teamwork and collaboration abilities.
  • Pro-active, well-organized, and results-oriented approach to work.
  • Experience in contingency environments and working with government contracts is highly desired.

Work Environment and Physical Demands

This is a full-time position located in Riyadh, Saudi Arabia. The role requires 2-5 years of experience, with 4 years' experience specifically in delivering DOD Base Operating Support-Installation (BOS-I) or similar work in an overseas or contingency environment being highly desired. USAF experience is also highly desired. The work environment includes both indoor and outdoor settings, with potential exposure to heat, cold, dust, noise, and chemicals. Overtime and shift work may be required based on contractual needs, along with occasional to frequent travel. Employees must comply with all Federal, State, and Local regulations and published Company work rules. Task-specific work environment training may be provided. Employees must be prepared to function in a wartime or contingency environment to support * interests. Physical requirements include lifting up to 35 lbs, team lifting up to 50 lbs, climbing, extended sitting or standing, stooping, stretching, and bending. Work may require the use of personal protective equipment (PPE) such as hard hats, gloves, steel-toed boots, hearing protection, and safety glasses, as well as Individual Protective Equipment (IPE) which may include body armor, helmets, and specialized clothing. Day-to-day physical requirements may also involve standard office activities.

breifcase2-5 years

locationRiyadh

Remote Job
7 days ago
Electronic Technician

Electronic Technician

📣 Job AdNew

Cubic Corporation

Full-time

About the Role

Cubic Corporation, a technology solutions provider for transportation and defense, is seeking an Electronics Technician for its Cubic Defense business unit. This full-time position is based in Tabuk, Saudi Arabia, and will provide essential operation and maintenance support for the P-4 SAKITS pods. This role is critical to supporting the Royal Saudi Air Force (RSAF) F15C/D Air Combat Maneuver & Instrumentation (ACMI) program. The successful candidate will report to the Site Manager and work closely with Field Service Technicians, requiring the ability to work independently with minimal supervision.

Key Responsibilities

  • Maintain a comprehensive log detailing the serial number, pod type, date, time, and remarks for all P-4 SAKITS pods checked in and out of the P-4 SAKITS pod shop.
  • Manage and update a daily status and availability log for all P-4 SAKITS pods.
  • Record elapsed Time Meter readings monthly to determine each pod's operational time.
  • Operate and maintain the P-4 SAKITS Test Set in strict accordance with applicable technical documentation.
  • Perform Organizational-Level (O-Level) and Intermediate-Level (I-Level) maintenance tests and replace Shop Replaceable Assemblies (SRAs) on P-4 SAKITS pods.
  • Provide assistance as required in the operation and maintenance of display equipment.
  • Perform duties of a computer operations technician, including loading programs for operation and testing, conducting subsystem tests to assess operational readiness, and loading pre-mission exercise data into the Data Transfer Device (DTD).
  • Maintain a control log for the issuance and receipt of DTDs to and from aircrews.
  • Operate graphics terminals during live exercises and assist with display and control operations.
  • Offer technical assistance to RSAF personnel or aircrews during the setup for replay/debriefing sessions.
  • Maintain and store records of mission tapes.
  • Compile and maintain a mission event log, including specific and pertinent data under headings such as date, time, mission/event, remarks, and operator.
  • Interface directly with the RSAF to discuss mission sortie effectiveness.
  • Undertake additional operations duties as directed by the Site Supervisor.
  • Comply with Cubic's values, code of conduct, and all company policies and procedures, including those related to quality, security, and occupational health, safety, and environmental standards.
  • Perform other duties as assigned by management that may be reasonably required.
  • Support the setup of project equipment when necessary.
  • Collaborate effectively as part of a team, supporting colleagues to ensure the successful provision of services to the customer.

Qualifications and Requirements

  • Previous experience in a similar role is required.
  • Demonstrated ability to comply with company standard practices as they apply to field assignments.
  • Proven ability to adapt to a remote and/or foreign environment.
  • Ability to work in confined spaces.
  • Capability to lift up to 75 pounds.
  • Must be able to obtain (or currently possess) RSAF security clearance, including a background check.
  • A college qualification in a technical field, or equivalent technical education and military experience, is essential.
  • Certification of English Comprehension, Speaking, Reading, and Writing by TOEFL, STEP Test, or another KSA-recognized exam is desirable.
  • An Engineering Degree specializing in Electronics, Avionics, or Communication is also desirable.

Required Skills

  • Proficiency in operation and maintenance support for P-4 SAKITS pods.
  • Experience with Organizational-Level (O-Level) and Intermediate-Level (I-Level) maintenance procedures.
  • Skill in Shop Replaceable Assemblies (SRAs) replacement.
  • Competence in computer operations.
  • Experience operating Data Transfer Devices (DTD).
  • Ability to operate graphics terminals.
  • Strong technical assistance capabilities.
  • Excellent record-keeping and documentation skills.
  • Effective interfacing skills with military personnel, specifically the RSAF.
  • Adaptability to remote and foreign environments.
  • Ability to work effectively with military and foreign personnel.
  • Good inter-personal skills with efficient and flexible communication abilities.
  • Capacity to work effectively under pressure.
  • A focused and conscientious approach to work.
  • Self-motivated with a proactive attitude.

Work Environment and Details

This is a full-time position located in Tabuk, Saudi Arabia. The role requires the ability to adapt to a remote and foreign environment, work in confined spaces, and lift up to 75 pounds. Candidates must be able to obtain RSAF security clearance.

breifcase0-1 years

locationTabuk

Remote Job
3 days ago
Technician, SCADA

Technician, SCADA

📣 Job Ad

Eram Talent

Seasonal

About the Role

Eram Talent is seeking a skilled Technician, SCADA for a contract position within a leading organization located in Yanbu, Al Madinah, Saudi Arabia. This role is essential for ensuring the efficient and reliable operation of industrial processes and infrastructure through the management of Supervisory Control and Data Acquisition (SCADA) systems. The successful candidate will possess a strong technical background in control and instrumentation or industrial automation, with the capability to manage the installation, maintenance, and troubleshooting of complex SCADA systems.

Key Responsibilities

  • Install, configure, and maintain SCADA hardware and software components to ensure optimal system performance.
  • Continuously monitor SCADA systems to guarantee uninterrupted and stable operation.
  • Perform SCADA system monitoring and operation tasks as required.
  • Conduct troubleshooting and incident response for SCADA-related issues.
  • Provide support for Programmable Logic Controllers (PLCs) and Remote Terminal Units (RTUs).
  • Offer communication and network support for SCADA infrastructure.
  • Manage alarms effectively and respond to alerts.
  • Conduct both corrective maintenance (CM) and preventive maintenance (PM) activities.
  • Execute regular preventive maintenance and system updates to maintain peak system efficiency.
  • Collaborate with engineers and operations teams to implement system improvements and upgrades.
  • Maintain comprehensive documentation of SCADA configurations, maintenance activities, and incident reports.
  • Ensure strict adherence to safety standards and organizational policies.

Qualifications and Requirements

  • Possess a technical diploma in control and instrumentation or industrial automation.
  • Minimum of 5 years of experience working with SCADA systems within an industrial environment.
  • Demonstrated experience in SCADA system monitoring and operation.
  • Proven ability in troubleshooting and incident response, including PLC and RTU support, communication and network support, and alarm management.
  • Experience in conducting both corrective and preventive maintenance (CM & PM) activities.
  • Excellent problem-solving skills with a keen attention to detail.
  • Good communication skills, enabling effective collaboration within a team environment.
  • Willingness to work flexible hours, including providing on-call support as needed.

Required Skills

  • SCADA Systems
  • SCADA Hardware and Software Components
  • SCADA System Monitoring & Operation
  • Troubleshooting & Incident Response
  • PLC and RTU Support
  • Communication and Network Support
  • Alarm Management
  • Corrective and Preventive Maintenance (CM & PM) Activities
  • Problem-Solving Skills
  • Attention to Detail
  • Communication Skills
  • Teamwork

Work Environment and Location

This is a contract position based in Yanbu, Al Madinah, Saudi Arabia, with the primary work location in Yanbu and Medina. The role requires flexibility in working hours, including on-call support when necessary.

breifcase5-10 years

locationYanbu

Remote Job
7 days ago