Full-time Quality Specifications And Metrics Specialist Jobs With No Experience in Dammam

More than 3 Full-time Quality Specifications And Metrics Specialist Jobs With No Experience in Dammam. Explore detailed job descriptions, salaries, and locations. Apply and get hired today!

Dammam

Category

Full-time

Nationality

Remote Job Female-only Workplace Fresh Graduates

QC Inspector 3

QC Inspector 3

Advanced Metals Company (AMCO)

About the Role

Advanced Metals Company (AMCO) is seeking a diligent and detail-oriented QC Inspector 3 to join our team in Dammam, Saudi Arabia. This full-time position is crucial for ensuring the quality of workshop jobs and maintaining the accuracy of our measuring and testing instruments. The role involves performing planned QC/Inspection activities, preparing comprehensive QC reports, and conducting in-house calibration of essential equipment. As a QC Inspector 3, you will play a vital role in upholding AMCO's commitment to quality by meticulously inspecting workshop operations and ensuring all processes adhere to established standards. Your contributions will directly impact the reliability and integrity of our products and services.

Key Responsibilities

Coordinate with workshop Foremen to conduct necessary inspections and Quality Control (QC) checks on workshop job orders, preparing detailed stage inspection reports.
Witness pressure tests performed by production supervisors for workshop jobs, ensuring compliance with safety and quality protocols.
Perform final inspections and authorize the release of workshop job orders, verifying that all QC activities have been completed according to the Documentation & Final Inspection check sheet.
Conduct in-house calibration of linear measuring instruments and pressure gauges to ensure their accuracy and reliability.
Maintain the current calibration status of all instruments and ensure physical calibration status control tags are up-to-date.
Notify the QC Manager of instruments requiring external calibration and ensure these are completed within planned frequencies.
Raise Non-Conformance Reports (NCR) for any discrepant items identified during inspection stages and follow up with the QC Manager for their resolution and closure.
Execute all necessary activities to achieve the quality objectives set for the QA/QC Department.
Prepare comprehensive QC reports for completed job orders.
Ensure the current calibration status is maintained for all in-house measuring and testing instruments.

Qualifications

A Mechanical Engineer or Diploma qualification is required.
0-1 years of experience in a relevant QC or inspection role.

Required Skills

Proficiency in QC/Inspection procedures.
Strong reporting and documentation skills.
Experience with instrument calibration.
Ability to effectively raise and manage Non-Conformance Reports (NCR).

Work Details

This is a full-time position based in Dammam, Eastern Province, Saudi Arabia. The role requires 0-1 years of experience in a QC or inspection capacity.

0-1 years

Dammam

Quality Inspector-1

Quality Inspector-1

GE Vernova

About the Role

GE Vernova is seeking a Quality Inspector to join their team in Dammam, Eastern Province, Saudi Arabia. This full-time position is essential for supporting quality control activities focused on gas turbine components, ensuring adherence to strict quality standards throughout manufacturing and preparation processes. The role offers an opportunity to contribute to operational excellence within a leading energy technology company.

Key Responsibilities

Perform quality inspections in accordance with approved work instructions, quality plans, and process requirements.
Review and verify the completeness, accuracy, and compliance of Final Reports with all quality requirements.
Raise quality concerns and escalate issues that may impact product quality, process compliance, or customer expectations.
Initiate and support Non-Conformance Report (NCR) activities to document and control nonconforming product or process conditions.
Contribute to root cause analysis (RCA) and corrective action activities to address and prevent quality issues.
Ensure rigorous inspection discipline, process compliance, and adherence to quality standards across the production line.
Interpret work instructions, quality forms, technical documentation, specifications, and engineering drawings for inspection execution.
Record and maintain accurate inspection results, quality findings, and supporting documentation.
Utilize inspection tools, gauges, measuring devices, and related equipment safely and effectively.
Identify nonconforming conditions and support containment, documentation, escalation, and follow-up actions.
Adhere to Standard Work and Standard Work Combination Sheets for consistency, quality, safety, and efficient line flow.
Maintain a clean, safe, and organized work area in compliance with 5S standards.
Apply Lean principles in daily work activities.
Participate in problem-solving sessions, root cause analysis, and corrective action activities.
Identify and communicate opportunities for continuous improvement in safety, quality, cycle time, process flow, and waste reduction.
Support improvements in standard work, line organization, visual management, and process discipline.
Contribute to team efforts to improve line performance, operational efficiency, and shop productivity.
Work within defined takt time, cycle time, and standard process flow expectations.
Utilize shop floor systems and interfaces such as ELM, SmartShop, and MyAndon as required.
Comply with all company quality policies, safety requirements, procedures, and standard work guidelines.

Qualifications and Requirements

Possess a Diploma, technical college degree, or equivalent hands-on experience.
Demonstrate knowledge or experience in welding quality inspection.

Required Skills

Proficiency in quality control and inspection processes.
Strong understanding and application of Lean principles, including Lean implementation, Standard Work, and 5S standards.
Effective problem-solving and root cause analysis (RCA) capabilities.
Ability to read and interpret work instructions, quality plans, process requirements, technical documentation, and engineering drawings.
Experience with Final Reports and Non-Conformance Report (NCR) procedures.
Competence in using inspection tools and measuring devices.
Familiarity with shop floor systems such as ELM, SmartShop, and MyAndon.
Commitment to continuous improvement and process flow optimization.
Ability to work effectively within defined operational performance metrics and contribute to team efforts.

Additional Information

This is a full-time position located in Dammam, Eastern Province, Saudi Arabia. The role requires 0-1 years of experience. Experience working with gas turbine components or other precision aerospace/industrial parts for a minimum of 2 years is desired. An NDT License is considered a plus.

0-1 years

Dammam

about 21 hours ago

Inspection Engineer

Inspection Engineer

GE Vernova

About the Role

GE Vernova is seeking a motivated and detail-oriented Inspection Engineer to join its team in Dammam, Eastern Province, Saudi Arabia. This full-time role is designed for an early-career professional with 0-1 years of experience, aiming to build a strong foundation in quality assurance within the gas turbine component repair sector. The Inspection Engineer will be instrumental in ensuring that all equipment, systems, materials, and constructed assets adhere to stringent standards for safety, quality, reliability, and regulatory compliance. This position offers the opportunity to gain comprehensive knowledge of quality processes throughout the repair lifecycle of gas turbine components, from initial incoming inspection through in-process checks to final verification, while developing expertise in documenting job conditions and identifying defects through technical reports.

Key Responsibilities

Adhere strictly to all safety and quality requirements, demonstrating leadership by example and exceeding standard expectations.
Conduct thorough incoming and final inspections on gas turbine components to accurately identify any nonconformances or defects.
Interpret technical data, perform precise measurements, and evaluate results against applicable codes, industry standards, and project specifications.
Champion and uphold all GEMTEC policies and procedures, actively promoting Environmental, Health, and Safety (EHS), quality, and compliance initiatives on the shop floor.
Perform quality inspection tasks within cell operations, contributing to the overall quality assurance of the repair process.
Develop a deep understanding of all aspects of quality in operations and inspection during the repair of gas turbine components.
Gain proficiency in writing technical reports detailing job conditions and any defects encountered during operations.

Qualifications and Requirements

Possess a technical diploma coupled with relevant work experience.
Demonstrate a solid understanding of EHS and quality principles as they apply to manufacturing operations.
Exhibit proven knowledge of quality assurance practices, safety protocols, and shop computer systems.

Required Skills

Proficiency in EHS and Quality management principles.
Familiarity with shop computer systems.
Ability to interpret and read technical drawings and REIs (Repair Engineering Instructions).
Competence in using various measuring instruments, such as calipers and dial indicators.
Skill in reading and understanding Work Instructions and Quality Management System (QMS) procedures.
Capability to write clear and concise technical reports.
Ability to comprehend technical documents.
Strong written and verbal communication skills in English.
Proficiency in using Microsoft Office applications.
Preferred knowledge of SAP.

Work Environment and Details

This is a full-time position based in Dammam, Eastern Province, Saudi Arabia. Relocation assistance is not provided for this role.

0-1 years

Dammam