Quality Technician Jobs in Dammam

About the Role

GE Vernova is seeking a Quality Inspector to join their team in Dammam, Eastern Province, Saudi Arabia. This full-time position is essential for supporting quality control activities focused on gas turbine components, ensuring adherence to strict quality standards throughout manufacturing and preparation processes. The role offers an opportunity to contribute to operational excellence within a leading energy technology company.

Key Responsibilities

• Perform quality inspections in accordance with approved work instructions, quality plans, and process requirements.
• Review and verify the completeness, accuracy, and compliance of Final Reports with all quality requirements.
• Raise quality concerns and escalate issues that may impact product quality, process compliance, or customer expectations.
• Initiate and support Non-Conformance Report (NCR) activities to document and control nonconforming product or process conditions.
• Contribute to root cause analysis (RCA) and corrective action activities to address and prevent quality issues.
• Ensure rigorous inspection discipline, process compliance, and adherence to quality standards across the production line.
• Interpret work instructions, quality forms, technical documentation, specifications, and engineering drawings for inspection execution.
• Record and maintain accurate inspection results, quality findings, and supporting documentation.
• Utilize inspection tools, gauges, measuring devices, and related equipment safely and effectively.
• Identify nonconforming conditions and support containment, documentation, escalation, and follow-up actions.
• Adhere to Standard Work and Standard Work Combination Sheets for consistency, quality, safety, and efficient line flow.
• Maintain a clean, safe, and organized work area in compliance with 5S standards.
• Apply Lean principles in daily work activities.
• Participate in problem-solving sessions, root cause analysis, and corrective action activities.
• Identify and communicate opportunities for continuous improvement in safety, quality, cycle time, process flow, and waste reduction.
• Support improvements in standard work, line organization, visual management, and process discipline.
• Contribute to team efforts to improve line performance, operational efficiency, and shop productivity.
• Work within defined takt time, cycle time, and standard process flow expectations.
• Utilize shop floor systems and interfaces such as ELM, SmartShop, and MyAndon as required.
• Comply with all company quality policies, safety requirements, procedures, and standard work guidelines.

Qualifications and Requirements

• Possess a Diploma, technical college degree, or equivalent hands-on experience.
• Demonstrate knowledge or experience in welding quality inspection.

Required Skills

• Proficiency in quality control and inspection processes.
• Strong understanding and application of Lean principles, including Lean implementation, Standard Work, and 5S standards.
• Effective problem-solving and root cause analysis (RCA) capabilities.
• Ability to read and interpret work instructions, quality plans, process requirements, technical documentation, and engineering drawings.
• Experience with Final Reports and Non-Conformance Report (NCR) procedures.
• Competence in using inspection tools and measuring devices.
• Familiarity with shop floor systems such as ELM, SmartShop, and MyAndon.
• Commitment to continuous improvement and process flow optimization.
• Ability to work effectively within defined operational performance metrics and contribute to team efforts.

Additional Information

This is a full-time position located in Dammam, Eastern Province, Saudi Arabia. The role requires 0-1 years of experience. Experience working with gas turbine components or other precision aerospace/industrial parts for a minimum of 2 years is desired. An NDT License is considered a plus.

About the Role

Alkhorayef Petroleum Company is seeking a dedicated Quality Inspector to join their team in Dammam, Eastern Province, Saudi Arabia. This full-time role is crucial for supporting the company's quality assurance functions across all stages of Electrical Submersible Pump (ESP) component manufacturing, from incoming materials to final product release. The Quality Inspector will play a key part in ensuring all products meet stringent internal and industry quality standards. The primary purpose of this position is to meticulously monitor and manage the quality of ESP components and assemblies, requiring a proactive approach to identifying and resolving quality issues and contributing to the continuous improvement of manufacturing processes.

Key Responsibilities

• Perform detailed dimensional and visual inspections of raw materials and machined components upon receipt.
• Review and verify essential documentation, including Material Test Certificates (MTCs), Certificates of Conformity (CoCs), and inspection reports.
• Conduct in-process inspections during machining and assembly operations to ensure strict adherence to drawings and specifications.
• Inspect critical features such as impeller/diffuser clearances, stack lengths, rotor fits, keyways, and other tolerance-critical areas.
• Validate and accurately record the results of First Article Inspections (FAI) in accordance with established control plans.
• Support assembly and testing operations by inspecting sub-assemblies and final ESP pump assemblies.
• Review and verify the cleanliness, marking, and serialization of components before final release.
• Conduct final inspections on completed units to ensure full conformance to Inspection and Test Plans (ITPs).
• Identify and report any non-conformances, and actively assist in root cause investigations and containment actions.
• Maintain precise inspection records and ensure complete traceability of all inspected items.
• Monitor calibration due dates for all inspection, measuring, and test equipment (IMTE).
• Coordinate internal or external calibration activities and ensure that updated calibration certificates are readily available.
• Verify that measuring tools are within their calibration period before use and are properly stored after use.
• Support internal and external audits by providing necessary inspection records, calibration data, and traceability documents.
• Collaborate closely with production, engineering, and quality teams to resolve quality issues and drive continuous improvement initiatives.

Qualifications and Requirements

• Diploma in Mechanical, Production, or Manufacturing Engineering, or an equivalent qualification.
• 2 to 5 years of relevant experience in a quality inspection role, preferably within ESP manufacturing or a similar rotating equipment industry.
• Proficiency in using essential inspection tools such as calipers, micrometers, bore gauges, height gauges, and thread gauges.
• Strong understanding of engineering drawings, tolerances, and Geometric Dimensioning and Tolerancing (GD&T).
• Basic knowledge of ISO 9001, API Q1, and relevant oil & gas manufacturing standards.
• Familiarity with calibration systems and measurement traceability principles.
• Professional English written and verbal communication skills.
• Good understanding of ISO 9001 Quality Management System (QMS) requirements and implementation.
• Computer literacy is required.
• Familiarity with Non-Destructive Equipment/Testing (NDE/NDT) is considered a plus.

Required Skills

• Dimensional Inspection
• Visual Inspection
• Documentation Review
• In-process Inspection
• First Article Inspection (FAI)
• Assembly Inspection
• Final Inspection
• Non-conformance Reporting
• Root Cause Analysis
• Calibration Monitoring
• Inspection and Measuring Equipment (IME) Calibration
• Audit Support
• Continuous Improvement
• Proficiency with Calipers, Micrometers, Bore Gauges, Height Gauges, and Thread Gauges
• Understanding of Engineering Drawings, Tolerances, and GD&T
• Knowledge of ISO 9001 and API Q1 standards
• Familiarity with Oil & Gas Manufacturing Standards
• Understanding of Calibration Systems and Measurement Traceability
• English Communication Skills (Written and Verbal)
• QMS Implementation
• Computer Literacy
• Familiarity with Non-Destructive Equipment/Testing (NDE/NDT)

Work Environment and Details

This is a full-time position based in Dammam, Eastern Province, Saudi Arabia. The role requires 2-5 years of relevant experience. Alkhorayef Petroleum Company is committed to maintaining high-quality standards in its manufacturing processes.

About the Role

Hitachi Energy is seeking a Senior Quality Control Technician to join its team in Dammam, Eastern Province, Saudi Arabia. This full-time position is integral to ensuring the quality and compliance of incoming materials and components, supporting the company's mission of powering a sustainable energy future and delivering innovative power grid technologies. The role involves maintaining high operational standards within the organization.

Key Responsibilities

• Execute assigned incoming inspection protocols and report all findings and results in SAP.
• Perform labeling of all compliant components with a component identification tag.
• Segregate non-compliant components in a designated area and initiate the supplier non-conformance management process.
• Ensure a safe working environment by implementing HSE (Health, Safety, and Environment) requirements.
• Conduct visual and dimensional inspections of purchased parts, materials, samples, and assemblies.
• Document inspection results accurately as required.
• Report any deviations observed during incoming inspection to the Quality Engineer or Quality Manager.
• Create quality inspection records and apply visual indications on inspected parts as per procedures.
• Create Nonconformity reports and maintain tracking of their status.
• Record and track the daily Incoming Quality Control (IQC) inspection backlog.
• Maintain traceability of component materials with respect to their inspection status.
• Handle materials in accordance with procedures, preventing mix-ups, damage, or other adverse effects.
• Log and track materials through the receiving inspection process and SAP entries.
• Record transactions and move accepted materials to the designated area.
• Communicate inspection results to Quality Engineers and other relevant personnel.
• Verify the accuracy of assembly documentation and read engineering drawings.
• Collaborate with other departments for deviation detection, root cause analysis, and correction measure implementation.
• Support failure analysis, troubleshooting activities, site visits, and reporting within the quality process, utilizing the A3 template for analysis.
• Perform any other projects or duties assigned by management that are necessary to fulfill the job requirements.

Qualifications and Requirements

• Diploma in Electrical or Mechanical technical courses.
• 3-5 years of experience in Quality Control/Quality Assurance.
• Proficiency in reading technical drawings.
• Hands-on experience in material inspection and the use of measurement tools.
• Experience with SAP is essential for reporting and tracking.
• Familiarity with supplier non-conformance management processes.
• Experience in implementing HSE requirements.
• Proven ability to collaborate with other departments for deviation detection and root cause analysis.
• Experience in failure analysis and troubleshooting.

Required Skills

• HSE Requirements
• Visual and Dimensional Inspection
• SAP
• Supplier Non-Conformance Management
• Quality Inspection Records
• Nonconformity Reporting
• Traceability of Component Materials
• MS Office and Computer Skills
• Material Inspection
• Use of Measurement Tools
• English Communication Skills
• Continuous Improvement
• Decision Making
• Time Management
• Root Cause Analysis
• Failure Analysis
• Troubleshooting
• A3 Template Utilization

Work Environment

This is a full-time position based in Dammam, Eastern Province, Saudi Arabia. The role requires adherence to established company procedures and a commitment to maintaining a safe and compliant work environment.

About the Role

Advanced Metals Company (AMCO) is seeking a diligent and detail-oriented QC Inspector 2 to join its team in Dammam, Eastern Province, Saudi Arabia. This full-time position is crucial for ensuring the quality of workshop operations and maintaining the integrity of measuring and testing instruments. The role involves performing planned quality control and inspection activities, preparing comprehensive reports, and conducting in-house calibration to uphold AMCO's high standards.

Key Responsibilities

• Coordinate with workshop Foremen to conduct necessary inspections and quality control checks on workshop job orders, preparing detailed stage inspection reports.
• Witness pressure tests performed by production supervisors for workshop jobs, ensuring adherence to established procedures.
• Perform final inspections and authorize the release of workshop job orders, verifying that all quality control activities have been completed as per the Documentation & Final Inspection check sheet.
• Conduct in-house calibration of linear measuring instruments and calibration of in-house pressure gauges.
• Maintain the current calibration status of all relevant instruments and ensure physical calibration status control tags are accurately updated and displayed.
• Notify the QC Manager regarding the calibration status of measuring or testing instruments requiring external calibration, ensuring timely recalibration according to planned frequencies.
• Raise Non-Conformance Reports (NCR) for any discrepant items identified at each inspection stage and follow up with the QC Manager for their prompt closure.
• Undertake all necessary activities to achieve the quality objectives set for the QA/QC Department.
• Prepare comprehensive QC reports for all completed job orders.
• Ensure that the calibration status of in-house measuring and testing instruments is consistently maintained and up-to-date.

Qualifications and Requirements

• A Mechanical Engineering degree or Diploma is required.
• A minimum of 2 to 5 years of relevant experience in a QC inspection role.

Required Skills

• Proficiency in QC/Inspection processes and methodologies.
• Strong reporting and documentation skills.
• Experience with instrument calibration procedures.
• Ability to effectively raise and manage Non-Conformance Reports (NCR).

Work Environment and Details

This is a full-time position based in Dammam, Eastern Province, Saudi Arabia. The role is integral to the QA/QC Department's objectives.

About the Role

GE Vernova is seeking a Technician – Heat Treatment to join their team in Dammam, Eastern Province, Saudi Arabia. This full-time position supports heat treatment operations on gas turbine components. The role is integral to driving overall Lean implementation by identifying improvement opportunities, supporting standard work, reducing waste, and enhancing process flow and operational performance.

Key Responsibilities

• Perform heat treatment operations strictly in accordance with approved work instructions, process specifications, and engineering requirements.
• Read and interpret work instructions and quality forms to ensure accurate execution of heat treatment processes.
• Record and maintain accurate process and measurement data as required by operational procedures.
• Safely and effectively operate and utilize heat treatment equipment, including furnaces, fixtures, thermocouples, and associated hand tools.
• Conduct inspections of parts both before and after heat treatment processes to verify conformance to quality requirements.
• Adhere to Standard Work and Standard Work Combination Sheets to ensure consistency, quality, safety, and efficient line flow.
• Maintain a clean, safe, and organized work area in accordance with established 5S standards.
• Demonstrate a strong understanding and consistent application of Lean principles in all daily work activities.
• Actively participate in problem-solving sessions, root cause analysis, and corrective action activities to address any process or quality issues.
• Identify and communicate opportunities for continuous improvement in areas such as safety, quality, cycle time, process flow, and waste reduction.
• Support improvements in standard work, line organization, visual management, and process discipline to strengthen overall Lean implementation.
• Contribute to team efforts aimed at improving line performance, operational efficiency, and overall shop productivity.
• Work within takt time, cycle time, and standard process flow expectations to support production goals.
• Utilize shop floor systems and interfaces, such as ELM and SmartShop, as required for operational tasks.
• Comply with all company quality policies, safety requirements, applicable procedures, and standard work guidelines.

Qualifications and Requirements

• Possess a Diploma, technical college degree, or equivalent hands-on experience.
• Demonstrate knowledge or experience in a technician, manufacturing, heat treatment, or industrial role.

Required Skills

• Heat Treatment knowledge and application.
• Proficiency in Lean behaviors and principles.
• Skills in problem-solving and root cause analysis.
• Understanding and application of 5S standards.
• Experience with continuous improvement initiatives.
• Familiarity with Standard Work and Standard Work Combination Sheets.
• Ability to interpret process specifications and quality forms.
• Experience operating heat treatment equipment, furnaces, fixtures, and thermocouples.
• Proficiency in the use of hand tools.
• Capability in part inspection.
• Experience with corrective action activities.
• Understanding of cycle time and waste reduction concepts.
• Knowledge of line organization and visual management.
• Adherence to process discipline.
• Proficiency with shop floor systems including ELM and SmartShop.
• Commitment to adhering to Quality policies and Safety requirements.

Work Location and Type

This is a full-time position located in Dammam, Eastern Province, Saudi Arabia. Relocation assistance is not provided for this role.

About the Role

WIKA Group, a global leader in measurement technology, is seeking a Production Technician to join its team in Dammam, Eastern Province, Saudi Arabia. With over 75 years of experience, WIKA provides advanced sensing solutions that enable safe, efficient, and sustainable processes. This full-time position is an opportunity for individuals with a technical background to contribute to a company addressing global megatrends such as demographic change, digitalization, and sustainability.

As a Production Technician, you will be instrumental in ensuring the quality and functionality of WIKA's products and systems. Your role will involve the installation, inspection, repair, and maintenance of equipment, directly supporting the operational excellence of the facility and contributing to customer satisfaction.

Key Responsibilities

• Install, inspect, repair, and maintain equipment, machinery, and systems in accordance with company product specifications and safety guidelines.
• Provide support for service jobs, which may include performing drilling and grinding work both within the facility and at customer sites.
• Diagnose issues and faults in equipment or systems and implement effective solutions.
• Conduct tests and calibrations to ensure the proper functionality, accuracy, and performance of equipment and systems.
• Inspect machines and perform routine maintenance to ensure optimal condition and adherence to quality standards.

Qualifications and Requirements

• Possess a Technical Institute diploma or certification in relevant technical fields, with a preference for Instrumentation or Electrical Engineering.
• Minimum of 1 year of experience in instrumentation, specifically within the refinery, petrochemical, or Oil & Gas (O&G) sectors.
• Familiarity with reading blueprints and understanding equipment safety protocols.
• Demonstrated technical expertise in equipment maintenance and repair.
• Basic computer knowledge.

Required Skills

• Instrumentation
• Electrical Engineering
• Blueprint Reading
• Equipment Safety
• Maintenance
• Repairing
• Computer Literacy

Work Environment and Details

This is a full-time position for a Production Technician at WIKA Group, located in Dammam, Eastern Province, Saudi Arabia. The role requires 0-1 year of experience. WIKA Group offers a supportive work environment with development opportunities.

About the Production Operator Role

Napco National is seeking a motivated Production Operator to join its manufacturing team in Dammam, Eastern Province, Saudi Arabia. This full-time position is designed for individuals with 0-1 year of experience who are looking to contribute to efficient production processes. The Production Operator will be responsible for operating designated machinery to produce products according to precise specifications, ensuring both quality and consistency.

Key Responsibilities

• Validate the availability of all required documents, such as Job First Time (JFT) and Production Control Card (PCC), before commencing a new job to minimize downtime and ensure production consistency.
• Operate machinery according to the Work Instruction to ensure safe and sound runnability.
• Troubleshoot operational problems and request support when needed to minimize downtime and improve overall efficiency.
• Check and relay startup samples to the Production Section Head for approval before submitting them for Quality Control (QC) inspection, ensuring the quality of the initial run.
• Report any quality defects identified to QC and the Production Section Head so that necessary actions can be taken promptly.
• Assign tasks to machine helpers to ensure an organized production run and maintain the 5S conditions of the assigned machines and surrounding work area.

Qualifications and Requirements

• An Industrial Diploma is preferred.
• One year of experience in related tasks is required.
• Knowledge of written and spoken Arabic and English is considered a plus.

Required Skills

• Machine Operation
• Troubleshooting
• Quality Control
• Teamwork
• Adherence to 5S Principles

Work Location and Type

This is a full-time position based in Dammam, Eastern Province, Saudi Arabia. The role requires 0-1 year of experience.

About the Production Operator Role

Napco National is seeking a diligent and detail-oriented Production Operator to join its team in Dammam, Eastern Province, Saudi Arabia. This full-time position is suitable for individuals with 0-1 year of experience looking to develop a career in manufacturing. As a Production Operator, your primary responsibility will be the efficient and safe operation of designated machinery to produce high-quality products according to established specifications. This role involves close collaboration with production and maintenance teams, as well as quality control personnel, to ensure smooth operations and consistent product quality, playing a crucial part in maintaining production efficiency and upholding workplace standards.

Key Responsibilities

• Setup and operate designated machinery efficiently to manufacture products according to pre-set specifications.
• Validate the availability of all required documents, such as Job First Time (JFT) and Production Control Cards (PCC), prior to new job start-up to minimize downtime and ensure production consistency.
• Operate machinery in accordance with Work Instructions to ensure safe and sound runnability.
• Troubleshoot operational problems and request support when needed to minimize downtime and improve overall efficiency.
• Check and relay startup samples to the Production Section Head for approval before passing them to Quality Control (QC) inspection, ensuring the quality of the initial run.
• Report any quality defects observed to QC and the Production Section Head so that necessary actions can be taken promptly.
• Assign tasks to helpers to ensure an organized production run and maintain the 5S conditions of assigned machines and the surrounding work area.

Qualifications and Requirements

• An Industrial Diploma is preferred.
• 0-1 year of experience in related tasks is required.
• Knowledge of written and spoken Arabic is mandatory.
• Knowledge of written and spoken English is considered a plus.

Required Skills

• Proficiency in Machine Operation.
• Strong Troubleshooting abilities.
• Understanding of Quality Control principles.
• Effective Teamwork and collaboration skills.
• Adherence to 5S workplace organization standards.

Work Environment and Interfaces

This is a full-time position located in Dammam, Eastern Province, Saudi Arabia. The role requires interaction with internal teams including all production and maintenance teams, Forklift Drivers, and Quality Control personnel. There are no external interfaces specified for this role.

About the Production Operator Role

Napco National is seeking a detail-oriented Production Operator to join their team in Dammam, Eastern Province, Saudi Arabia. This full-time position is designed for individuals with 0-1 year of experience looking to develop a career in manufacturing. The Production Operator will be responsible for the efficient operation and maintenance of designated machinery to produce products according to strict specifications, ensuring both quality and consistency.

Key Responsibilities

• Set up and operate designated machines efficiently to manufacture the required product according to pre-set specifications.
• Validate the availability of all required documents, such as Job First Time (JFT) and Production Control Check (PCC), prior to new job start-up to minimize downtime and ensure production consistency.
• Operate machinery in accordance with Work Instructions to ensure safe and sound runnability.
• Troubleshoot machine issues and request support when necessary to minimize downtime and improve overall efficiency.
• Check and relay startup samples to the Production Section Head for approval before passing them to Quality Control (QC) for inspection, ensuring the quality of the initial run.
• Report any quality defects immediately to QC and the Production Section Head to facilitate prompt corrective actions.
• Assign tasks to machine helpers to ensure an organized production run and maintain the 5S conditions of their assigned machines and surrounding work areas.

Qualifications and Experience

• An Industrial Diploma is preferred.
• One year of experience in related production tasks is required.

Language Proficiency

• Knowledge of written and spoken Arabic is essential.
• Knowledge of written and spoken English is considered a plus.

Required Skills

• Machine Operation
• Troubleshooting
• Quality Control
• Teamwork
• 5S Methodology

Work Location and Type

This is a full-time position located in Dammam, Eastern Province, Saudi Arabia.

About the Production Operator Role

Napco National is seeking a Production Operator to join their team in Dammam, Eastern Province, Saudi Arabia. This full-time position requires a detail-oriented individual with a solid understanding of production processes and a commitment to maintaining quality and efficiency. The Production Operator will be instrumental in ensuring smooth and consistent manufacturing operations by adhering to established work instructions and upholding a safe working environment.

Key Responsibilities

• Verify the availability of all necessary documents, including Job First Time (JFT) and Production Control Card (PCC), before starting new jobs to minimize downtime and ensure production consistency.
• Operate machinery strictly according to Work Instructions to ensure safe and sound runnability.
• Troubleshoot operational issues and request support from relevant teams when needed to reduce downtime and enhance overall efficiency.
• Check and submit startup samples to the Production Section Head for approval before they are sent for Quality Control (QC) inspection, ensuring the quality of the initial production run.
• Report any identified quality defects immediately to both QC and the Production Section Head to enable prompt corrective actions.
• Assign tasks to Helpers to ensure an organized production run and maintain the 5S conditions of assigned machines and the surrounding work area.

Qualifications and Requirements

• An Industrial Diploma is preferred.
• 0-1 year of experience in related production tasks is required.
• Proficiency in written and spoken Arabic is mandatory.
• Knowledge of written and spoken English is considered a plus.

Required Skills

• Machine Operation
• Troubleshooting
• Quality Control
• 5S Methodology

Work Environment and Interfaces

This is a full-time position located in Dammam, Eastern Province, Saudi Arabia. The Production Operator will interact internally with all production and maintenance teams, Forklift Drivers, and Quality Control personnel.

About the Role

Hitachi Energy's High Voltage business is seeking a motivated Testing Technician to join our team in Dammam, Saudi Arabia. In this role, you will be instrumental in ensuring the quality and compliance of capacitor banks (HV) through meticulous testing activities. You will operate with a strong focus on safety, efficiency, quality, and productivity, guaranteeing that our products and systems meet all required standards and specifications.

Key Responsibilities

• Perform High Voltage (HV) testing activities in strict adherence to prepared test instructions, drawings, checklists, guidelines, and customer order data.
• Follow all required test instructions and protocols meticulously during testing activities.
• Strictly adhere to all safety rules and regulations throughout the execution of your duties.
• Apply lean manufacturing methods, including principles such as 5S, identifying and eliminating 8 Wastes, and participating in Kaizen initiatives.
• Report any identified safety hazards using the "Intelex" tool.
• Report any quality issues by submitting Non-Conformance Reports (NCRs) within the SAP/MES system.
• Demonstrate the ability to read and interpret HV drawings.
• Actively participate in and complete all required training courses, such as those focused on safety and Lean Six Sigma (*, White Belt certification).
• Communicate and collaborate effectively and proactively with all colleagues.
• Undertake any additional tasks assigned by management that are necessary to fulfill the job requirements.
• Embody Hitachi Energy’s core values of safety and integrity by taking responsibility for your actions and caring for colleagues and the business.

Qualifications and Requirements

• Possess a Diploma in Electrical Engineering.
• Have a strong understanding of Electrical Symbols, Schematic drawings, and Mechanical drawings.
• Exhibit excellent verbal and written communication skills, with the ability to interact professionally with a diverse group of individuals.
• Proficiency in both spoken and written English is essential.

Required Skills

• HV testing
• Adherence to safety rules and regulations
• Application of Lean manufacturing methods
• Proficiency with SAP/MES
• Ability to read HV drawings
• Understanding of Electrical Symbols
• Interpretation of Schematic drawings
• Interpretation of Mechanical drawings
• Effective communication

Work Environment and Details

This is a full-time position for a Testing Technician at Hitachi Energy, located in Dammam, Eastern Province, Saudi Arabia. The role requires 0-1 year of experience.

About the Role

Advanced Metals Company (AMCO) is seeking a diligent and detail-oriented QC Inspector 3 to join our team in Dammam, Saudi Arabia. This full-time position is crucial for ensuring the quality of workshop jobs and maintaining the accuracy of our measuring and testing instruments. The role involves performing planned QC/Inspection activities, preparing comprehensive QC reports, and conducting in-house calibration of essential equipment. As a QC Inspector 3, you will play a vital role in upholding AMCO's commitment to quality by meticulously inspecting workshop operations and ensuring all processes adhere to established standards. Your contributions will directly impact the reliability and integrity of our products and services.

Key Responsibilities

• Coordinate with workshop Foremen to conduct necessary inspections and Quality Control (QC) checks on workshop job orders, preparing detailed stage inspection reports.
• Witness pressure tests performed by production supervisors for workshop jobs, ensuring compliance with safety and quality protocols.
• Perform final inspections and authorize the release of workshop job orders, verifying that all QC activities have been completed according to the Documentation & Final Inspection check sheet.
• Conduct in-house calibration of linear measuring instruments and pressure gauges to ensure their accuracy and reliability.
• Maintain the current calibration status of all instruments and ensure physical calibration status control tags are up-to-date.
• Notify the QC Manager of instruments requiring external calibration and ensure these are completed within planned frequencies.
• Raise Non-Conformance Reports (NCR) for any discrepant items identified during inspection stages and follow up with the QC Manager for their resolution and closure.
• Execute all necessary activities to achieve the quality objectives set for the QA/QC Department.
• Prepare comprehensive QC reports for completed job orders.
• Ensure the current calibration status is maintained for all in-house measuring and testing instruments.

Qualifications

• A Mechanical Engineer or Diploma qualification is required.
• 0-1 years of experience in a relevant QC or inspection role.

Required Skills

• Proficiency in QC/Inspection procedures.
• Strong reporting and documentation skills.
• Experience with instrument calibration.
• Ability to effectively raise and manage Non-Conformance Reports (NCR).

Work Details

This is a full-time position based in Dammam, Eastern Province, Saudi Arabia. The role requires 0-1 years of experience in a QC or inspection capacity.

About the Role

Hitachi Energy is seeking a motivated Assembly Technician to join its team in Dammam, Eastern Province, Saudi Arabia. This full-time position is an opportunity for individuals with a foundational understanding of assembly and testing processes within a production facility. As an Assembly Technician, you will play a crucial role in fulfilling orders by performing assembly and repair activities according to detailed work instructions, drawings, and bills of materials, contributing to the quality and efficiency of production processes.

Key Responsibilities

• Fulfill order-related work packages in accordance with production data and instructions provided by assigned foremen.
• Execute assembly and repair activities based on prepared work instructions, drawings, bills of materials, checklists, guidelines, and customer order data.
• Perform and participate in routine testing of assembled GIS units, components, and modules, adhering to work instructions, drawings, checklists, guidelines, and customer order data.
• Strive for optimal performance in terms of quality, cost, and delivery time.
• Conduct self-checks of completed work packages, accurately filling out and confirming assigned checklists and protocols.
• Support the gathering of product improvement comments and feedback from GIS Local Service Center (LSC) engineers.
• Adequately handle factory equipment and tools, ensuring their proper maintenance and continuous calibration.
• Actively support teamwork by effectively communicating and collaborating with internal customers, stakeholders, and colleagues across assembly, testing, and logistics departments.
• Independently adhere to factory rules and guidelines related to safety, quality, environment, recycling, and housekeeping.
• Maintain a safe working environment by strictly following Hitachi Energy's HSE guidelines and promptly reporting any irregularities.
• Contribute actively to the continuous improvement process and foster a Lean culture within the team.
• Provide feedback, share ideas, and offer observations whenever possible to enhance processes and outcomes.
• Carry out any additional tasks assigned by management that are necessary to fulfill the job requirements.
• Uphold Hitachi Energy’s core values of safety and integrity by taking responsibility for personal actions and caring for colleagues and the business.

Qualifications and Requirements

• Diploma in Electrical Engineering.
• A minimum of 1-2 years of experience in a production facility, specifically in assembly and testing roles.
• Understanding of Lean concepts and the ability to minimize the seven wastes.
• Capability to read and precisely understand technical drawings and material lists.
• Proficiency in both spoken and written English.

Required Skills

• Assembly
• Repair
• Testing
• Teamwork
• Communication
• Collaboration
• Adherence to Safety standards
• Quality Assurance
• Environmental awareness
• Recycling practices
• Housekeeping standards
• Continuous Improvement methodologies
• Lean Manufacturing principles

Work Environment and Details

This is a full-time position based in Dammam, Eastern Province, Saudi Arabia. The role requires adherence to factory rules and guidelines related to safety, quality, environment, recycling, and housekeeping, as well as strict compliance with Hitachi Energy's HSE guidelines.

About the Role

Advanced Metals Company (AMCO) is seeking a diligent and detail-oriented QC Inspector 3 to join its team. This full-time position is based in Dammam, Eastern Province, Saudi Arabia, and is suitable for individuals with 0-1 years of experience looking to build a career in quality assurance within the metals industry. The QC Inspector will play a crucial role in ensuring that all workshop operations meet the company's high standards of quality and compliance.

Key Responsibilities

• Coordinate with workshop Foremen to conduct necessary inspections and Quality Control (QC) checks on workshop job orders, preparing detailed stage inspection reports.
• Witness pressure tests performed by production supervisors for workshop jobs, ensuring adherence to safety and quality protocols.
• Conduct final inspections of workshop job orders, verifying that all QC activities have been completed according to the Documentation & Final Inspection check sheet before release.
• Perform in-house calibration of linear measuring instruments and calibration of in-house pressure gauges to maintain accuracy and reliability.
• Maintain the current calibration status of all relevant instruments and ensure physical calibration status control tags are accurately updated and displayed.
• Notify the QC Manager regarding the calibration status of measuring or testing instruments requiring external calibration, ensuring they are kept current as per planned frequencies.
• Raise Non-Conformance Reports (NCR) for any discrepant items identified at each stage of inspection and follow up with the QC Manager for their timely closure.
• Undertake all necessary activities to achieve the Quality objectives set forth by the QA/QC Department.
• Prepare comprehensive QC reports for completed job orders, documenting all inspection and testing activities.
• Ensure the current calibration status is maintained for all in-house measuring and testing instruments.

Qualifications and Requirements

• Mechanical Engineer/Diploma qualification.
• 0-1 years of experience in a relevant role.

Required Skills

• Quality Control
• Inspection
• Calibration
• Reporting
• Non-Conformance Reporting

Work Environment

This is a full-time position located in Dammam, Eastern Province, Saudi Arabia. The role involves working within the workshop operations of Advanced Metals Company (AMCO).

About the Process Quality Operations Engineer Role

Baker Hughes is seeking a Process Quality Operations Engineer to join the Industrial and Energy Technology (IET) Team in Dammam, Eastern Province, Saudi Arabia. This role is integral to the company's Engineering Transformation efforts, focusing on enhancing the quality of engineering processes and ensuring operational excellence within the global IET division, which serves the entire energy value chain and industrial sector.

Key Responsibilities

• Support Cell and Quality teams in daily auditing operations within packaging to ISO and Baker Hughes standards.
• Partner with Operational Leaders to ensure cell operations are smooth and compliant with all applicable procedures.
• Record audit findings in Baker Hughes related tools.
• Publish and monitor quality metrics for observations and punch lists identified during execution phases.
• Drive cross-functional improvement projects for operational processes using lean methods, aimed at flawless execution and eliminating waste associated with escaping defects and observations/punch lists.
• Lead quality toolbox awareness initiatives within the shop floor.
• Perform and drive Non-Conformance Analysis (NCA) and Root Cause Analysis (RCA) for observations, punch lists, and escaping defects.
• Monitor the execution of quality programs and the performance of quality indicators, including weekly defect reviews and quarterly Quality Management Reviews (QMR).
• Ensure the effective implementation of Quality Control processes.
• Create and review work instructions and procedures as needed for manufacturing processes.

Qualifications and Experience

• Bachelor's Degree in Mechanical Engineering.
• A minimum of 5 years of experience in manufacturing and rotating equipment.
• Experience range of 5-10 years is preferred.

Required Skills and Competencies

• Quality Auditing
• Compliance Management
• Quality Metrics Analysis
• Lean Methods Implementation
• Root Cause Analysis (RCA)
• Quality Control Processes
• Work Instructions and Procedure Development
• Strong leadership skills
• Ability to work effectively in a global environment
• Functional/Technical Expertise
• Customer Focus
• Communication Skills
• Interpersonal Skills
• Team Working

Work Location and Type

This is a full-time position located in Dammam, Eastern Province, Saudi Arabia.

About the Inspector Role

GE Vernova is seeking a diligent and detail-oriented Inspector to join our team in Dammam, Eastern Province, Saudi Arabia. This full-time role is crucial for ensuring the quality of gas turbine components throughout the repair process. The successful candidate will gain comprehensive knowledge of quality assurance practices, from incoming inspection to final sign-off, and will play a key role in maintaining high standards of operational excellence. As an Inspector, you will be responsible for executing quality inspection tasks within cell operations. This position requires a commitment to safety and quality, with an expectation to lead by example and go above and beyond in your duties. You will contribute to the technical reporting of job conditions and any defects identified during operations.

Key Responsibilities

• Perform incoming and final inspections on gas turbine components to identify any nonconformances or defects.
• Interpret, measure, and evaluate results against applicable codes, standards, and specifications.
• Adhere to all GEMTEC policies and procedures, actively promoting Environmental, Health, and Safety (EHS), quality, and compliance on the shop floor.
• Write technical reports detailing job conditions and any defects encountered during operations.

Required Qualifications

• Possess a technical diploma with relevant work experience.
• Demonstrate knowledge of EHS and quality requirements essential for manufacturing operations.
• Ability to read and understand Work Instructions and Quality Management System (QMS) procedures.
• Proficiency in writing technical reports.
• Capability to understand technical drawings and documents.
• Competency in using MS Office applications.

Essential Skills and Experience

• Extensive knowledge of Quality and Safety protocols.
• Familiarity with shop computer systems and Shop Support requirements.
• Proficiency in using various measuring instruments, such as calipers and dial indicators.
• Experience with NDT (Non-Destructive Testing) certifications is highly desirable.
• Preferred knowledge of SAP.
• Ability to read, write, and communicate effectively in English.
• 5-10 years of experience in a relevant field.

Work Location and Details

This is a full-time position based in Dammam, Eastern Province, Saudi Arabia. Relocation assistance is not provided for this position.

About the Role

Hitachi Energy is seeking a Senior Customer Quality Specialist to join its team in Dammam, Saudi Arabia. This full-time position is responsible for managing and resolving internal and external customer complaints to enhance customer satisfaction. The role involves conducting systematic root cause analysis and developing corrective and preventive action plans to address issues and prevent recurrence.

This position offers the opportunity to contribute to Hitachi Energy's commitment to safety and integrity within the energy sector. The specialist will be instrumental in upholding quality standards and ensuring customer satisfaction through effective issue resolution and proactive engagement.

Key Responsibilities

• Manage internal and external customer complaints to ensure seamless resolution and enhance customer satisfaction.
• Conduct systematic root cause analysis (RCA) to identify underlying causes of quality issues.
• Develop and implement corrective and preventive action plans to resolve identified issues and prevent future occurrences.
• Ensure rapid definition and execution of containment actions and corrections to limit impact on customer operations.
• Work to eliminate potential occurrences of issues within Hitachi Energy operations and at customer sites.
• Maintain customer satisfaction ratings through proactive engagement and effective issue resolution.
• Conduct customer audits to ensure adherence to quality standards and identify areas for improvement.
• Provide timely updates to customers regarding the status of quality issues or requests to build trust and maintain positive relationships.
• Ensure compliance with applicable external and internal regulations, procedures, and guidelines.
• Uphold Hitachi Energy's core values of safety and integrity in all aspects of the role.

Qualifications and Requirements

• Bachelor's degree in Engineering, preferably Electrical or Mechanical.
• 12-15 years of relevant professional experience.
• Experience in managing quality escalations.
• Proven ability to collaborate effectively with cross-functional teams, including Instrument & Control (I&C) and service colleagues, both domestically and internationally.
• Demonstrated ability to drive change and exhibit diligence in problem-solving.
• Experience in influencing continuous improvement initiatives.
• Strong decision-making capabilities.
• Effective time management skills.
• Proficiency in both spoken and written English language is required.

Required Skills and Expertise

• Strong GIS product knowledge.
• Expertise in HV Sub-station protection and Operations.
• Proficiency in Quality Control and Quality Assurance principles.
• Experience with Quality Management Systems (QMS) and Internal Quality Auditing.
• Familiarity with various Quality Tools.
• Skilled in Root Cause Analysis (RCA).
• Knowledge of Lean Six Sigma methodologies.
• Experience with SAP QM Module.
• Excellent Communication and Presentation Skills.
• Experience in conducting Customer Audits.
• Change Management capabilities.
• Diligence and attention to detail.
• Commitment to Continuous Improvement.
• Effective Decision Making.
• Strong Time Management.

Work Location and Type

This full-time position is based in Dammam, Eastern Province, Saudi Arabia.

About the Role

GE Vernova is seeking a motivated Coating Technician to join its team in Dammam, Eastern Province, Saudi Arabia. This full-time position is integral to supporting thermal spray coating operations on gas turbine components. The role involves pre-coat and post-coat weighing, as well as the application of coatings, with a strong emphasis on safe and accurate process execution.

This position is suitable for individuals with 0-1 years of experience looking to develop their skills within a manufacturing setting. The role emphasizes adherence to Lean principles, active participation in problem-solving, compliance with 5S standards, and a commitment to continuous improvement initiatives focused on enhancing safety, quality, delivery, and overall productivity.

Key Responsibilities

• Perform coat application strictly in accordance with approved work instructions, process standards, and engineering requirements.
• Execute masking for coating processes as required, following approved work instructions and process specifications.
• Read and interpret work instructions and quality forms to ensure accurate and precise coating application.
• Record and maintain accurate process and measurement data as per established requirements.
• Safely and effectively utilize coating equipment, weighing devices, fixtures, and hand tools.
• Inspect parts before and after coating processes to verify conformance to all quality requirements.
• Adhere to Standard Work and Standard Work Combination Sheets to ensure consistency, quality, safety, and efficient line flow.
• Maintain a clean, safe, and organized work area in compliance with 5S standards.
• Demonstrate a strong understanding and application of Lean principles in all daily work activities.
• Actively participate in problem-solving, root cause analysis, and corrective action activities to address process or quality issues.
• Identify and communicate opportunities for continuous improvement in safety, quality, cycle time, flow, and waste reduction.
• Support improvements in standard work, line organization, visual management, and process discipline to strengthen overall Lean implementation.
• Contribute to team efforts aimed at improving line performance, operational efficiency, and overall shop productivity.
• Work within takt time, cycle time, and standard process flow expectations to support production goals.
• Utilize shop floor systems and interfaces such as ELM and SmartShop as required.
• Comply with company quality policies, safety requirements, applicable procedures, and standard work.

Qualifications and Requirements

• Possess a Diploma, technical college degree, or equivalent hands-on experience.
• Demonstrate knowledge or experience in a technician, manufacturing, coating, or industrial role.

Required Skills and Experience

• Proficiency in Lean behaviors, problem-solving, and maintaining 5S standards.
• Experience with continuous improvement methodologies and initiatives.
• Familiarity with thermal spray coating processes and masking for coating.
• Ability to read and interpret work instructions and quality forms.
• Competence in using coating equipment, weighing devices, fixtures, and hand tools.
• Understanding and application of Standard Work and Standard Work Combination Sheets.
• Knowledge of Lean principles, root cause analysis, and corrective action activities.
• Awareness of cycle time, flow, and waste reduction concepts.
• Skills in line organization, visual management, and process discipline.
• Understanding of takt time and standard process flow.
• Experience with shop floor systems, including ELM and SmartShop.
• Experience with Thermal Barrier Coating processes.
• Familiarity with gas turbine components or other precision aerospace/industrial parts.

Work Environment and Details

This is a full-time position based in Dammam, Eastern Province, Saudi Arabia. The role requires adherence to established work instructions and safety protocols within a manufacturing environment.