Full-time Quality Technician Jobs in Saudi Arabia

About the Role

Esnad Contracting is seeking a Procurement Quality Control Supervisor to join its team in Jeddah, Makkah, Saudi Arabia. This full-time position is integral to ensuring that all procured materials, equipment, and vendor deliverables adhere to stringent project specifications, approved standards, contractual obligations, and established quality management procedures. The Procurement Quality Control Supervisor will oversee quality aspects throughout the procurement lifecycle, from initial supplier assessment to final material acceptance, thereby safeguarding the integrity and quality of all project inputs.

Key Responsibilities

• Review and approve vendor quality documents, including material submittals and Inspection and Test Plans (ITPs).
• Coordinate vendor, supplier, and third-party inspections to ensure compliance with project requirements.
• Monitor the compliance of procured materials with project specifications and established quality standards throughout the procurement process.
• Conduct comprehensive supplier audits and vendor qualification assessments to verify capabilities and adherence to quality protocols.
• Follow up diligently on Non-Conformance Reports (NCRs), corrective actions, and other quality-related issues to ensure timely resolution.
• Coordinate effectively with Procurement, Engineering, QA/QC, and Project Teams to ensure all quality requirements are consistently met.
• Prepare and maintain accurate procurement quality reports and essential documentation for project records and audits.

Qualifications and Experience

• Bachelor's Degree in Civil Engineering, Mechanical Engineering, Electrical Engineering, Industrial Engineering, or a closely related discipline.
• A minimum of 8 to 10 years of progressive experience in Procurement Quality Control, Supplier Quality, Vendor Inspection, QA/QC, or a similar field.
• Proven experience working on infrastructure, roads, utilities, civil construction, industrial, EPC, or mega projects.
• Demonstrated experience collaborating with contractors, suppliers, manufacturers, and inspection agencies.

Required Skills and Expertise

• Expertise in Procurement Quality Control (PQC) and Vendor Quality Management.
• Proficiency in conducting Supplier Audits & Qualification processes.
• Strong capabilities in Material Inspection & Testing and the development/review of Inspection & Test Plans (ITP).
• Experience with Factory Acceptance Testing (FAT) and managing Non-Conformance Reports (NCRs).
• Thorough understanding of Quality Management Systems (QMS) and the Technical Submittals & Material Approval Processes.
• Knowledge of International Quality Standards and Construction Specifications.
• Skilled in Vendor Inspection & Supplier Management.
• Proficient in Quality Assurance & Quality Control methodologies.
• Adept at Technical Documentation Review and ensuring Audit & Compliance.
• Strong Problem-Solving abilities.
• Excellent Communication & Coordination skills.
• Proficient in Report Writing.
• Effective Stakeholder Management.
• Exceptional Attention to Detail.
• Demonstrated Team Leadership capabilities.

Additional Information

The role is a full-time position based in Jeddah, Makkah, Saudi Arabia. Preferred certifications include ISO 9001 Lead Auditor or Internal Auditor, PMP Certification, CSWIP, NACE, API, ASNT, or equivalent quality certifications, and Saudi Council of Engineers Registration for KSA-based candidates. Experience in infrastructure projects, roads & highways, utilities, civil construction, industrial projects, EPC projects, and major developments such as Aramco, SABIC, Royal Commission, SEC, NEOM, Red Sea, Qiddiya, or Diriyah is highly preferred.

About the Role

Egis is a global leader in architecture, consulting, construction engineering, and mobility services, focused on creating intelligent infrastructures and buildings that address climate challenges and promote sustainable territorial development. With a significant presence across 100 countries and a team of 19,500 employees, Egis applies its expertise and innovations to serve clients worldwide. In the Middle East, Egis operates with 3,500 employees across 8 countries, having delivered over 700 development projects. Ranked among the top ten firms in the region by Engineering News Record (ENR), Egis is committed to sustainable development and understanding local market dynamics.

As a Materials Engineer based in Jeddah, Makkah, Saudi Arabia, you will be responsible for overseeing daily laboratory operations, ensuring the accuracy of test results, and guaranteeing compliance with approved standards and specifications. This role involves conducting material tests, monitoring performance, preparing comprehensive reports, and implementing robust Health, Safety, and Environment (HSE) and Quality Assurance/Quality Control (QA/QC) measures. You will provide essential supervision and management to uphold the highest safety and quality standards throughout projects.

Key Responsibilities

• Oversee daily laboratory operations to ensure efficient functioning.
• Perform comprehensive material tests and validate sample reports for accuracy and reliability.
• Track material performance throughout project lifecycles and report on findings.
• Verify that all materials used adhere strictly to approved standards and project-specific specifications.
• Implement and monitor on-site quality control measures in alignment with regulatory requirements and project standards.
• Ensure all materials comply with relevant safety standards and regulations.
• Maintain thorough documentation and reporting of all testing and monitoring activities.
• Conduct regular site inspections to ensure compliance with material quality standards and overall work quality.
• Develop and implement region- and project-specific procedures to enhance operational efficiency and compliance.

Qualifications and Requirements

• A Bachelor's degree in Engineering, Construction, or Materials Engineering is mandatory.
• A minimum of 8 years of experience in materials engineering or a closely related field.
• Demonstrated experience with MOT specifications and standards.
• Expertise in materials engineering principles, laboratory procedures, and relevant specifications.
• Familiarity with acceptance criteria for a diverse range of material types.
• Proven ability to supervise facilities and networks effectively.
• In-depth understanding of project practices, standards, procedures, and specifications relevant to the construction industry.

Required Skills

• Health, Safety, and Environment (HSE) management.
• Quality Assurance and Quality Control (QA/QC) implementation.

Work Context

This is a full-time position for a Materials Engineer. The role is based in Jeddah and Makkah, within the Makkah region of Saudi Arabia. The position requires over 10 years of experience in the field.

About the Role

Fakeeh Care Group is seeking a dedicated Quality Specialist to join their team in Jeddah, Makkah, Saudi Arabia. This full-time position is integral to ensuring the highest standards of quality and compliance within the organization's Emergency Medical Services (EMS) operations. The role focuses on aligning policies, procedures, and practices with international accreditation standards and driving continuous improvement in patient care and safety.

Key Responsibilities

• Ensure Emergency Medical Services (EMS) policies and procedures align with requirements from international accreditation bodies such as JCIA, ACHS, and ABBA's.
• Conduct regular gap analyses against accreditation standards and develop comprehensive action plans for compliance.
• Coordinate all readiness activities for accreditation surveys, including documentation, staff preparation, and evidence collection.
• Maintain up-to-date knowledge of evolving accreditation standards and regulatory requirements applicable to EMS.
• Draft, revise, and implement policies, procedures, and clinical guidelines in collaboration with EMS leadership.
• Ensure all documentation is standardized, properly formatted, version-controlled, and accessible to relevant personnel.
• Provide training and orientation to staff on updated or new policies and procedures.
• Perform qualitative reviews of documentation within the Electronic Medical Record (EMR) system to ensure adherence to proper documentation practices across Fakeeh Health Care facilities, in compliance with clinical documentation policy.
• Conduct regular quality audits on EMS operations, clinical documentation, and patient safety practices.
• Track key performance indicators (KPIs) related to EMS quality and safety, identify non-conformities, and collaborate with departments to implement corrective and preventive actions.
• Generate and analyze monthly audit reports, identifying discrepancies and areas for improvement, for both internal Fakeeh Health Care facility standards and external regulatory requirements.
• Communicate audit findings and recommendations to Quality Risk Management (QRM), Chief Medical Officer (CMO), and other relevant leadership, suggesting actionable improvements.
• Act as a contributing member of selected organizational committees.
• Participate in the validation process of new KPIs and collect manually collected KPIs from assigned end-users.
• Continuously monitor the privacy and confidentiality of patient documents and information throughout Fakeeh Health Care Group.
• Monitor incident reports, near-misses, and adverse events, ensuring timely follow-up and reporting within the OVR system.
• Support root cause analysis (RCA) investigations and recommend system improvements to prevent incident recurrence.
• Promote a safety culture among EMS staff through education and engagement.
• Collect, analyze, and present quality data, trends, and dashboards to support management decision-making.
• Prepare and submit regular quality and compliance reports to the Quality Manager and senior leadership.
• Support research and benchmarking activities aimed at enhancing EMS quality improvement initiatives.
• Contribute to educational initiatives focused on audit processes, quality standards, and regulatory compliance.
• Conduct workshops on documentation accuracy, patient safety, and the effective use of patient feedback to drive service improvements.
• Facilitate ongoing professional development to keep staff updated on healthcare quality management and audit techniques.

Qualifications and Requirements

• A minimum of 3 years of experience in the healthcare field.
• At least 2 years of experience specifically within a Quality Risk Management (QRM) department in a large healthcare facility.
• A Bachelor's degree in a healthcare field is preferred, ideally an Emergency Medical Services degree.
• Possession of a CPHQ certification or higher is highly desirable.
• Excellent command of both oral and written English and Arabic languages.

Required Skills

• Commitment to enhancing service quality and organizational standards.
• Ability to manage high-pressure situations effectively.
• Proactive approach to taking ownership of duties and organizational goals, with the ability to resolve issues independently.
• Effective collaboration skills to achieve shared objectives.
• Responsiveness to changing environments and adeptness in managing transitions.
• Dedication to ensuring superior service delivery to enhance patient satisfaction.
• A deep understanding of job responsibilities and their broader organizational impact.
• Proficiency in improvement methods and processes.
• Skilled in data aggregation, validation, and analysis.
• Expertise in risk identification and management.

Work Environment and Experience

This is a full-time position based in Jeddah, Makkah, Saudi Arabia. The role requires a minimum of 5-10 years of experience, with a specific emphasis on quality management within the healthcare sector.

About the Role

Hill International is recruiting Saudi nationals for engineering and technical roles across Saudi Arabia as part of its commitment to local talent development and support for major projects. An exclusive recruitment fair will be held in Jeddah during the second week of July, offering shortlisted candidates the opportunity to meet directly with the client for face-to-face interviews.

Key Responsibilities

While specific duties will vary by role, successful candidates will undertake tasks related to their specialized engineering discipline. These may include:

• Managing stakeholder interfaces for effective communication and collaboration.
• Overseeing testing and commissioning processes to ensure system functionality.
• Implementing and monitoring scheduling control measures.
• Identifying, assessing, and mitigating project risks.
• Contributing to design processes and ensuring adherence to specifications.
• Controlling project costs and managing budgets.
• Administering contracts and ensuring compliance.
• Specializing in budgeting and financial planning for projects.
• Leading scheduling control sections and teams.
• Performing quantity surveying duties for construction projects.
• Ensuring project scope and quality control standards are met.
• Managing projects from inception to completion.
• Utilizing PMIS (Project Management Information System) for cost and schedule control.
• Developing and implementing master plans, monitoring progress, and reporting on project status.
• Ensuring adherence to Health, Safety, Security, and Environment (HSSE) standards.
• Facilitating engineering interfaces between different disciplines and teams.
• Overseeing construction management activities on-site.
• Supporting project execution as a Graduate Engineer.
• Performing document control functions for engineering projects.

Qualifications and Requirements

Candidates must hold a relevant Engineering Degree for most engineering positions. An Engineering Degree is not required for the Document Controller role. Experience levels vary by specific role:

• Stakeholders Interface Engineer: Minimum 10 years experience
• Senior Testing & Commissioning Engineer: Minimum 15 years experience
• Senior Scheduling Control Engineer: Minimum 15 years experience
• Senior Projects Risk Engineer: Minimum 15 years experience
• Senior Design Engineer: Minimum 15 years experience
• Senior Cost Control Engineer: Minimum 15 years experience
• Senior Contracts Management Engineer: Minimum 15 years experience
• Senior Budgeting Specialist: Minimum 15 years experience
• Scheduling Control Section Head: Minimum 15 years experience
• Quantity Surveyor: Minimum 10 years experience
• Project Scope & Quality Control Specialist: Minimum 15 years experience
• Project Manager: Minimum 15 years experience
• PMIS – Project Cost & Schedule Control Specialist: Minimum 7 years experience
• Master Planning, Monitoring & Reporting Engineer: Minimum 10 years experience
• HSSE Specialist: Minimum 10 years experience
• Engineering Interface Engineer: Minimum 10 years experience
• Construction Management Engineer: Minimum 10 years experience
• Graduate Engineer: Minimum 3 years experience
• Fresh Graduate: No experience required
• Document Controller: Minimum 3 years experience

Required Skills

• Stakeholders Interface Management
• Testing & Commissioning
• Scheduling Control
• Projects Risk Management
• Design Engineering
• Cost Control
• Contracts Management
• Budgeting
• Quantity Surveying
• Project Scope & Quality Control
• Project Management
• PMIS - Project Cost & Schedule Control
• Master Planning, Monitoring & Reporting
• HSSE (Health, Safety, Security, and Environment)
• Engineering Interface Coordination
• Construction Management
• Document Control

Work Locations and Type

Opportunities are available in Jeddah, Makkah, Riyadh, Dammam, Abha, Al Qassim, and Medina. This is a full-time position.

About the Role

Duruper is seeking a qualified Mechanical Inspector (QM) to join their team supporting OCA Global. This full-time position is based in Al Khobar, Eastern Province, Saudi Arabia, and is essential for ensuring the quality and compliance of mechanical installations and equipment within projects. The Mechanical Inspector will conduct thorough inspections of mechanical equipment, piping, welding, and pressure-containing components, requiring a strong understanding of international codes, project specifications, and Saudi Aramco standards.

Key Responsibilities

• Perform comprehensive inspections of mechanical commodities including pipes, fittings, valves, structural steel, fasteners, boilers, pressure vessels, and heat exchangers.
• Review and verify compliance with applicable international codes such as ASME Sections I, V, VIII, IX; ASME ******; API 620/650; AWS *; and NACE requirements.
• Conduct detailed welding inspections, including verification of WPS, PQR, welder qualifications, visual inspection (VT), and coordination of Non-Destructive Testing (NDT) methods such as Magnetic Particle Testing (MT), Penetrant Testing (PT), Ultrasonic Testing (UT), and Radiographic Film Interpretation (RTFI).
• Ensure strict adherence to Saudi Aramco Specifications & Standards and relevant industry best practices.
• Inspect the fabrication, installation, testing, and final completion of all mechanical systems.
• Verify the accuracy of material certificates, Positive Material Identification (PMI) results, and all associated documentation for mechanical components.
• Maintain detailed and accurate inspection reports, Quality Control (QC) records, and Non-Conformance Reports (NCRs), ensuring that corrective actions are effectively implemented.
• Coordinate closely with project teams, contractors, and quality managers to efficiently resolve technical and quality-related issues.
• Support audits and surveillance activities, providing essential technical input on all quality matters.

Qualifications and Requirements

• A Bachelor of Engineering (** or Bachelor of Technology (***** degree in a relevant engineering discipline, with a minimum of 6 years of inspection experience. Alternatively, a 3-year Diploma with 8+ years of relevant inspection experience will be considered.
• Strong knowledge of International Codes & Standards and Saudi Aramco Specifications & Standards.
• Must be a Saudi Aramco-approved inspector or have successfully passed the Saudi Aramco Computer-Based Test (CBT) Exam and Interview.
• Hold internationally recognized inspection certifications, including but not limited to: API SIFE, API 653, API 570, API 510.
• Possess ASME certifications for Pressure Vessels, Boilers, and Heat Exchangers.
• Hold ASNT Level II certification in MT, PT, UT, VT, and RTFI.
• Be a Certified Welding Inspector, holding either AWS CWI or CSWIP / certification.
• Demonstrate proven working knowledge of mechanical inspection requirements, testing equipment, and PMI instruments.
• Must hold the required Quality Management (QM) certifications: QM-03, QM-05, QM-07, QM-30, QM-31, QM-34, QM-35, QM-37, QM-68.

Required Skills

• Mechanical Inspection
• Piping Inspection
• Welding Inspection
• Pressure Vessel Inspection
• Proficiency in ASME Codes
• Proficiency in API Codes
• Proficiency in AWS Codes
• Understanding of NACE Requirements
• Knowledge of Saudi Aramco Specifications & Standards
• NDT Coordination
• Quality Control
• Documentation Review
• Material Verification
• Inspection Reporting
• Problem Solving
• Technical Communication

Work Environment and Details

This is a full-time position located in Al Khobar, Eastern Province, Saudi Arabia. The role requires approximately 5-10 years of relevant experience. The company is Duruper.

About the Role

Wood, a global leader in consulting and engineering, is seeking a Quality Coordinator / Quality Engineer to join its team in Al Khobar, Eastern Province, Saudi Arabia. This full-time position will support the Offshore Maintain Potential Program (OMPP) and offers an opportunity to contribute to quality strategies and the continuous improvement of the Business Management System within a dynamic project environment.

Key Responsibilities

• Provide support for the implementation of quality strategies, plans, objectives, and deliverables as directed by quality professionals.
• Assist in the communication, development, and improvement of the Business Management System (BMS).
• Support the development and improvement of other systems, such as Non-Conformance or customer satisfaction systems, including simple data analysis under guidance.
• Aid in the planning, execution, and reporting of planned assurance activities, including external assurance with suppliers and subcontractors.
• Assist in producing quality deliverables to support overall project or programme implementation.
• Engage with delivery and supporting functions to enhance awareness of interfaces and working practices.

Qualifications and Requirements

• A degree in Engineering is required.
• A minimum of 5 years of experience in the engineering field, with at least 1 year in a similar role.
• Working knowledge of quality management principles and practices is essential.
• Proficiency in the analysis of processes and data.
• Proficiency in Microsoft Office Suite.
• Good communication skills in both written and spoken formats.

Desirable Attributes

• Membership of CQI/ASQ Quality organizations, or an equivalent professional body.

Work Location and Benefits

This is a full-time position based in Al Khobar, Eastern Province, Saudi Arabia. Wood offers a comprehensive benefits package designed to support employee well-being and professional growth, including medical insurance, an Employee Assistance Programme, GOSI contributions, End of Service Gratuity, examination leave, reimbursement for one relevant professional membership per annum, Inspire Awards, Long Service Awards, and structured career development support.

Company Commitment

Wood is an equal opportunity employer that recognizes the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with relevant governing laws.

About the Role

Saipem, a global leader in engineering and construction for the energy and infrastructure sectors, is seeking a Procurement QC Supervisor to join its Inspection Team within the POSE department. This role is integral to ensuring that all procured materials meet stringent quality requirements, in compliance with corporate policies and procedures, thereby fulfilling both Contractor's and Client's Quality Control expectations during the procurement phase. This position contributes to Saipem's mission of engineering a sustainable future and enabling the energy transition toward Net Zero.

Key Responsibilities

• Review the Project Procurement QA/QC Scope of Work, Aramco Schedule Q, and Project Specifications.
• Provide support to various engineering disciplines regarding supplier inspections and tests during procurement.
• Review Material Requisitions to confirm adherence to all quality requirements.
• Review and approve Inspection Test Plans (ITPs).
• Coordinate with vendors, Engineering, and NDT Level III for the submission and approval of relevant procedures (NMR).
• Prepare and submit Inspection Assignment Packages (IAPs).
• Organize and conduct pre-inspection meetings.
• Monitor and ensure adequate inspection coverage, coordinating effectively with vendors and the client.
• Liaise with third-party inspection agencies.
• Manage Non-Conformance Reports (NCRs) and Punch Lists.

Qualifications and Requirements

• Master's Degree or Bachelor's Degree in Engineering or Technology.
• A minimum of 5 years of experience as a Procurement QC Supervisor within the Oil & Gas field/industry.
• Comprehensive command of the English language.

Required Skills

• Proficiency in Root Cause Analysis.
• Knowledge of NDE (Non-Destructive Examination) Techniques and their application.
• Strong IT skills, including MS Office and SAP.

Work Environment and Location

This is a full-time position. The work location is Al Khobar, Eastern Province, Saudi Arabia, with the specific work location potentially being at Amaad Business Park, Dhahran, KSA. Saipem offers a permanent contract, potentially fixed-term (1 year and renewable), and embraces diversity, fostering a culture of mutual respect, collaboration, and inclusion. Safety and sustainability are paramount in all operations.

About the Role

Intech Automation & Intelligence is seeking a qualified QC Engineer to join its team in Al Khobar, Eastern Province, Saudi Arabia. This full-time position is for a professional focused on quality assurance within a company recognized as a leader in industrial automation and digitalization technology. With nearly 30 years of experience partnering with major oil and gas companies, Intech is at the forefront of Industry technologies.

Role Overview

The ideal candidate will possess a strong understanding of Saudi Aramco QC requirements and prior experience on Saudi Aramco projects. This role requires Aramco approval and involves supervising on-site quality control activities to ensure all project deliverables meet the highest quality standards. The QC Engineer will be an integral part of a team dedicated to excellence and innovation.

Key Responsibilities

• Manage and supervise all on-site quality control activities, ensuring strict compliance with Saudi Aramco's QC standards and project specifications.
• Oversee the thorough inspection and testing of all materials, equipment, and construction activities to ensure they meet project and industry quality standards.
• Maintain accurate and comprehensive QC documentation, including detailed test reports, inspection records, and non-conformance reports (NCRs).
• Proactively identify and document non-conformances, implement effective corrective actions, and follow up to ensure their timely resolution.
• Conduct detailed inspections of materials and equipment sourced from vendors and suppliers to guarantee compliance with all project requirements.
• Collaborate with project managers, engineers, and stakeholders to address quality issues and implement solutions.
• Assist in conducting internal and external quality audits, ensuring QC procedures and records comply with Saudi Aramco and relevant industry regulations.
• Supervise and mentor on-site QC staff, ensuring quality control activities are performed according to established project standards.
• Participate in continuous improvement initiatives to enhance the project's overall quality performance.

Qualifications and Requirements

• Bachelor's Degree in Engineering (Mechanical, Electrical, Civil, or related discipline).
• A minimum of 5 years of experience in quality control, with a strong emphasis on EPC projects.
• Mandatory Aramco approval as a QC Engineer.
• Demonstrated familiarity with Saudi Aramco QC standards and procedures.
• Expertise in managing quality control processes and ensuring compliance with project specifications.
• Strong knowledge of inspection and testing procedures for EPC projects, covering materials, equipment, and construction activities.
• Proven ability to identify, document, and resolve non-conformances and quality issues effectively.
• Experience in maintaining detailed QC documentation and records, including inspection reports and NCRs.
• Certification in quality management systems, such as ISO 9001 or equivalent, is preferred.

Required Skills

• Quality Control
• Saudi Aramco QC requirements
• Supervising on-site QC activities
• Inspection and testing of materials, equipment, and construction activities
• QC documentation
• Non-conformance reports (NCRs)
• Quality audits
• Quality management systems (ISO 9001 or equivalent)
• Inspection and testing procedures for EPC projects
• High attention to detail
• Strong communication skills
• Problem-solving abilities
• Supervising and guiding a team
• Time management

Work Location and Type

This is a full-time position located in Al Khobar, Eastern Province, Saudi Arabia. The role requires 5-10 years of relevant experience.

About the Role

AtkinsRéalis is seeking a qualified and experienced Mechanical Inspector to join our team for Site Operations in Al Khobar, Eastern Province, Saudi Arabia. This full-time position offers an opportunity to contribute to significant projects within a world-class engineering services and nuclear organization. As a Mechanical Inspector, you will play a crucial role in ensuring the quality and compliance of construction works by meticulously reviewing contract documents, specifications, and drawings. You will be responsible for site supervision, monitoring contractor performance, and maintaining detailed records to uphold the highest standards of project execution.

Key Responsibilities

• Understand package contract documents, detailed drawings, specifications, and health and safety measures, including any associated updates.
• Ensure contractor compliance with contract standards and specifications through observation, measurements, and testing, while tracking quality assurance progress.
• Maintain records of the contractor's daily manpower and equipment resources.
• Undertake all site supervision and inspections as required or instructed by the Resident Engineer (RE) or Assistant Resident Engineer (ARE).
• Document contractor personnel and equipment, observed activities, locations, reasons for activities, and utilized means and methods within assigned areas.
• Report on materials delivery and follow and implement any site instructions provided by the leader.
• Apply and implement all quality controls and quality procedures of the site.
• Prepare any site measurements and surveying checks needed by the leader.
• Monitor conformance to quality, performance, and/or code requirements by performing inspection duties.
• Monitor the health and safety of construction works and report on any violations.

Qualifications and Experience

• Experience in construction supervision with a consultancy is required.
• A minimum of 8 years of overall experience is required, with at least 5 years specifically in the Middle East and Africa (MEA) region.
• Experience in Mechanical-related construction projects is essential.
• Must possess consultancy experience.

Required Skills

• Good knowledge of basic design requirements, mechanical methodologies, and installation processes and procedures.
• Familiarity with Building Codes.
• Experience in creative and interactive building projects.
• Effective oral and written communication skills.
• Competent report writing abilities, capable of presenting views clearly and concisely in good written English.
• Detailed knowledge of construction techniques.

Work Location and Type

This full-time position is based in Al Khobar, Eastern Province, Saudi Arabia.

About the Role

Duruper is seeking a highly experienced and Saudi Aramco-approved QC Welding Inspector for a full-time position in Al Khobar, Eastern Province, Saudi Arabia. This role is responsible for ensuring that all welding activities on oil and gas projects adhere strictly to approved welding procedures, project specifications, and relevant international codes and standards. The successful candidate will play a vital part in maintaining quality compliance, ensuring inspection integrity, and contributing to overall client satisfaction within the Saudi Aramco project environment.

Key Responsibilities

• Inspect all welding activities to ensure strict compliance with approved Welding Procedure Specifications (WPS), Inspection and Test Plans (ITPs), project specifications, and all applicable codes and standards.
• Monitor fit-up, welding execution, and post-weld activities to guarantee that all quality requirements are consistently met.
• Verify the qualifications of welders, the suitability of welding consumables, and the proper functioning of welding equipment before commencing any welding operations.
• Review and maintain all welding inspection records, comprehensive reports, and essential documentation.
• Coordinate with construction teams, the Quality Control department, and client representatives to resolve any welding-related issues.
• Ensure compliance with all Health, Safety, and Environment (HSE) regulations, quality management system requirements, and specific Saudi Aramco directives.
• Support audits, inspections, and quality control reviews pertaining to welding activities.

Qualifications and Requirements

• Diploma or Degree in Engineering.
• Minimum of 6 years of experience specifically within the oil and gas industry.
• Proven experience working as a QC Welding Inspector.
• Hold a valid CSWIP Welding Inspector certification issued in 2022 or earlier.
• Must have Saudi Aramco approval.

Required Skills

• Expertise in Welding Procedures and Project Specifications.
• Thorough understanding of International Codes and Standards relevant to welding.
• Proficiency in ensuring Quality Compliance and Inspection Integrity.
• Ability to contribute to Client Satisfaction through diligent work.
• Knowledge of Saudi Aramco Requirements and HSE standards.
• Experience in managing Welding Inspection Records, Welding Inspection Reports, and Welding Inspection Documentation.
• Familiarity with verifying Welder Qualifications, Welding Consumables, and Welding Equipment.
• Competence in understanding and applying ITPs and WPS.

Work Environment

This is a full-time position based in Al Khobar, Eastern Province, Saudi Arabia.

About the Role

Emerson is seeking an experienced Control Valves Assembly Technician to join their production team in Saudi Arabia. This full-time position involves the assembly, testing, and repair of Control and On-Off Valves and associated accessories. The role requires a strong understanding of valve manufacturing processes, mechanical aptitude, and a commitment to safety and quality.

Key Responsibilities

• Assemble all types of Control Valves, actuators, and accessories according to engineering specifications, drawings, manufacturing procedures, and quality standards.
• Interpret and follow instructions from technical drawings, manuals, and History Cards for accurate assembly operations.
• Perform mechanical, pneumatic, and hydrostatic testing of valves and actuators in compliance with Emerson’s quality standards and international codes.
• Conduct engraving and fitting of nameplates, tags, and identification elements to ensure traceability.
• Complete and maintain accurate documentation, including Valve Test Records, Assembly Checklists, and Inspection Reports.
• Assist with Factory Acceptance Testing (FAT) during internal and customer inspections, providing technical feedback.
• Perform basic welding and tack welding on components and accessories, adhering to safety and welding standards.
• Conduct visual inspections of welds and report any defects for correction.
• Maintain a clean and organized work area by strictly following 5S and Lean Manufacturing practices.
• Maintain tools, machinery, welding equipment, and fixtures in a safe, calibrated, and serviceable condition.
• Support preventive maintenance activities and coordinate with engineering/maintenance teams for scheduled servicing.
• Adhere to all Health, Safety & Environmental (HSE) policies, including correct PPE usage and hazard reporting via the Emerson Safety App.
• Participate in daily toolbox talks, risk assessments, and safety audits.
• Propose and implement continuous improvement initiatives to enhance product quality and process efficiency.
• Collaborate with multi-functional teams including QC, Manufacturing Engineering, and Planning to resolve production issues.
• Provide technical guidance and on-the-job training to junior technicians or apprentices.
• Support special testing or assembly processes for customized valve configurations.
• Demonstrate flexibility to work in different assembly areas or on multiple product lines as required.

Qualifications and Requirements

• Diploma in Mechanical/Production Engineering or an equivalent technical field.
• Minimum 3 years of hands-on experience in valve assembly and testing, preferably in manufacturing environments.
• Strong mechanical proficiency and problem-solving skills for various valve types and accessories.
• Fluent in English – reading, writing, and speaking.
• Good communication and team collaboration skills.
• A continuous drive for developing and improving professional skills.

Technical Skills and Competencies

• Control Valves Assembly
• Mechanical Skills
• Safety and Quality Assurance
• Continuous Improvement Methodologies (*, 5S, Lean Manufacturing)
• Interpretation of Mechanical Drawings and Technical Manuals
• Valve Testing (Mechanical, Pneumatic, Hydrostatic)
• Documentation and Record Keeping
• Factory Acceptance Testing (FAT) Support
• Basic Welding and Weld Inspection
• Tool and Equipment Maintenance
• Preventive Maintenance
• Adherence to Health, Safety & Environmental (HSE) Policies
• Risk Assessment and Hazard Reporting
• Team Collaboration and Communication
• Problem Solving
• Familiarity with Valve Link software for diagnostics and calibration is a plus.
• Conducting Fugitive Emission Checks
• Operation of various test benches and machines for hydrostatic testing (*, Ventil, PC Progetti, ITAL Control, Maximator).

Work Environment and Details

This is a full-time position based in Saudi Arabia. The role requires a commitment to safety, quality, and continuous improvement within Emerson's production environment. The company is Emerson, and the job title is Control Valves Assembly Technician - SPARK. The required experience is 2-5 years.

About the Role

Woods Specialty Cafe & Roastery is seeking a Training, Quality & Operational Excellence Specialist to support operational consistency across all locations. This full-time position is based in Al Khobar, Eastern Region, and requires 2-5 years of experience.

Core Responsibilities

The specialist will be instrumental in ensuring consistent training, product quality, operational compliance, and continuous improvement of systems and standards throughout Woods Specialty Cafe & Roastery. This involves a multi-faceted approach to maintaining high operational benchmarks.

Training and Development Oversight

• Deliver onboarding and refresher training programs for all staff levels, including baristas, cashiers, supervisors, and branch managers.
• Evaluate employee competencies and readiness for certification.
• Maintain comprehensive training records and ensure compliance with training protocols.

Quality Assurance and Compliance

• Conduct regular branch quality audits to verify adherence to beverage recipes and preparation standards.
• Monitor equipment calibration and brewing consistency.
• Analyze customer complaints to identify root causes and support the implementation of corrective and preventive actions.
• Participate in sensory calibration sessions to ensure product consistency.

Operational Excellence Initiatives

• Ensure compliance with Standard Operating Procedures (SOPs) and operational standards through regular audits.
• Identify opportunities for process improvement, waste reduction, and efficiency gains.
• Assist in the development and updating of SOPs.
• Monitor branch performance against key operational performance indicators (KPIs) and support continuous improvement projects.

Qualifications and Experience

• Bachelor's degree in Hospitality Management, Food & Beverage Management, Industrial Engineering, Business Administration, Food Science, or a related field.
• 3-5 years of experience in specialty coffee, restaurant or café operations, training, quality assurance, or operational auditing.
• Preferred certifications include Specialty Coffee Association (SCA), HACCP, Food Safety Certification, or Lean Six Sigma.

About the Role

TÜV SÜD is a company focused on technology and innovation, committed to progress and ensuring societal safety through testing, auditing, inspection, and advisory services. We are seeking a Senior Civil Engineer to join our team in Saudi Arabia. This role will concentrate on building inspection and testing in accordance with Saudi building codes and international standards, playing a key part in maintaining construction quality and regulatory compliance.

Key Responsibilities

• Conduct inspections and testing of buildings according to Saudi building codes and international standards for general construction quality, acting as a third-party for civil engineering quality firms.
• Prepare comprehensive reports and documentation detailing findings and comments, adhering to Saudi building codes and international standards.
• Review design documents and assess existing buildings, authoring reports and preparing certificates in line with TÜV SÜD's processes and procedures.
• Address and resolve construction-related issues or conflicts that may arise during the project lifecycle.
• Ensure compliance with TÜV SÜD guidelines and regulations, including permits and safety, and deliver required technical files and documentation.
• Receive and resolve escalated client complaints.
• Fulfill client schedules in a safe, timely, and sustainable manner.
• Conduct regular inspections of construction sites to verify compliance with design specifications and Saudi Building Codes.
• Collaborate with project managers, architects, contractors, and other stakeholders to coordinate construction activities and ensure project objectives are met according to Saudi Building Codes specifications.
• Stay updated on industry best practices, new technologies, and changes in building codes and regulations to enhance professional knowledge and skills.
• Comply with TÜV SÜD policies and procedures regarding safety equipment (PPE).
• Utilize and manage internal digital software, including BLS-Plan and radar, as required.
• Follow work instructions provided by the team leader and QA/QC assigned engineer.
• Provide support and take over responsibilities for colleagues on non-assigned projects during emergencies or leaves.

Qualifications and Requirements

• Bachelor's degree in Civil Engineering.
• 5-10 years of experience in Civil Engineering.
• Strong knowledge of civil and structural works, encompassing foundations, concrete, steel structures, and finishing works.
• Proven experience in site inspection, supervision, and quality control.
• Ability to prepare detailed technical reports and documentation.
• Knowledge of safety regulations and site safety practices.
• Strong communication and coordination skills, with the ability to collaborate effectively with multidisciplinary teams.

Required Skills and Competencies

• Civil Engineering Quality
• Report Writing
• Design Document Review
• Construction Issue Resolution
• Client Complaint Resolution
• Site Inspection
• Construction Site Compliance
• Stakeholder Collaboration
• Industry Best Practices
• Safety Equipment (PPE)
• Digital Software Proficiency (*, BLS-Plan, radar)
• Team Leadership
• Quality Assurance/Quality Control (QA/QC)
• Expertise in Civil and Structural Works
• Knowledge of Foundations, Concrete Structures, Steel Structures, and Finishing Works
• Site Supervision
• Quality Control Methodologies
• Technical Report Preparation
• Understanding of Safety Regulations and Site Safety Practices
• Effective Communication and Coordination Skills
• Multidisciplinary Team Collaboration

Work Environment and Location

This is a full-time, regular position requiring onsite work. The role is based within the Real Estate & Building Technology work area. While the primary focus is on Jeddah, Saudi Arabia, the company also has operations and potential project involvement in Riyadh, Al Khobar, Makkah, Al Jubail, Tabuk, and Yanbu, within the Riyadh Region and across Saudi Arabia.

About the Role

TÜV Rheinland Middle East, part of the global TÜV Rheinland Group, is a leader in independent testing, inspection, and certification services. Established in 2007, the company serves various industries across the United Arab Emirates and is expanding its operations. TÜV Rheinland Middle East is committed to maintaining high professionalism, focusing on client needs while balancing safety, competitiveness, and environmental considerations. The company aims to build long-term customer relationships to support brand protection.

TÜV Rheinland is seeking qualified professionals to join its team for Saudi Aramco projects, specifically within the Project Inspection Department (PID). These positions involve working on pipeline, petrochemical, and other oil and gas construction projects.

Key Responsibilities

• Conduct "Hold", "Witness", and "Surveillance" inspections and tests at manufacturing facilities or construction sites to ensure adherence to SAUDI ARAMCO requirements and project specifications.
• Inspect materials and equipment to confirm compliance with SAUDI ARAMCO requirements for proper handling, storage, and protection at SAUDI ARAMCO facilities and/or construction sites.
• Monitor Contractor's Quality Systems, records, and Quality Personnel for compliance with established requirements.
• Review and evaluate Contractor's Quality document submittals.
• Witness on-site and off-site material and installation tests to ensure compliance with SAUDI ARAMCO standards.
• Accurately record all observed non-complying construction practices, materials, and equipment, and report potential issues to the supervisor for timely resolution.
• Prepare inspection reports and generate Non-Conformance Reports (NCRs), Worksheets (WSs), and Equipment Deficiency Reports (EDRs) as required.

Qualifications and Experience

• A Bachelor of Science (** degree in Engineering in a relevant inspection discipline, with a minimum of four (4) years of experience in a related inspection field.
• OR A two (2) year industrial/technical College Diploma combined with at least eight (8) years of relevant inspection experience.
• Demonstrated working knowledge and experience with National Electric Code/NFPA 70, IEC, or equivalent standards.
• Working knowledge of electrical installations, including materials, methods, specifications, and hazardous location identification, particularly within the oil and gas or petrochemical industries.
• Possession of relevant certifications such as National Certification Program Construction Code Inspector (NCPCCI) or NFPA 70 Certified, or an equivalent.
• Previous experience on Pipeline projects, petrochemical, refinery, or oil and gas construction projects is highly preferred.
• Candidates with experience in the construction of oil & gas/petrochemical/refinery/oil & gas pipeline projects or new construction of oil and gas projects are preferred.

Required Skills

• Proficiency in National Electric Code/NFPA 70 and IEC standards.
• Expertise in electrical installations, covering materials, methods, and specifications.
• Understanding of hazardous location identification within the oil and gas or petrochemical industries.
• Relevant certifications such as National Certification Program Construction Code Inspector (NCPCCI) or NFPA 70 Certified, or equivalent.

Project Details and Location

This full-time position is for the QMIS - Saudi Aramco Quality Management Inspection Service project. The work location will be within Saudi Arabia, at Saudi Aramco project sites. The specific site will be identified upon selection. Saudi Aramco approval is preferred but not mandatory for candidates.

About the Role

Saipem is seeking a QC Supervisor – POSE to join their team in Al Khobar, Saudi Arabia. This full-time position is integral to ensuring the quality and compliance of purchased goods and services throughout the project lifecycle. The role involves overseeing quality control activities, managing documentation, and coordinating with stakeholders to achieve project objectives efficiently and cost-effectively.

Key Responsibilities

• Ensure the execution of quality control activities on purchased goods, verifying documentation against purchase order requirements, project procedures, and contract conditions, while optimizing costs.
• Maintain timely and accurate updates of Company Information Tools/Systems with quality control and inspection data, including Inspection Reports and Inspection Release Notes.
• Coordinate internal inspectors and/or inspection agencies to achieve project goals through cost-effective solutions, leveraging Company network synergies, best practices, and procedures.
• Review project quality control requirements and contractual documentation to identify discrepancies and prevent misunderstandings, applying a supply chain management approach.
• Support the Materials Management (MM) department in the issuance of Project QC procedures.
• Contribute to the finalization of PMC (Project Management Consultancy) and IDS (Inspection Data Sheet) documentation.
• Support the MM department on PO Inspection Classification.
• Provide specialist support to the engineering department for the review of vendor quality control documents, including Inspection and Test Plans (ITPs) and Test Procedures.
• Ensure all necessary documentation (Inspection Assignment Package) is available to the designated inspector before inspection activities commence for each Project Purchase Order (PO).
• Plan and organize Pre-Inspection Meetings (PIMs) with Vendors, ensuring attendance of all relevant parties including Sub-Vendors, Saipem representatives, the Client, and any other required third-party personnel.
• Ensure the correct project inspection notification workflow with the Client and/or Third Parties in accordance with contractual requirements, and verify all necessary documentation is available prior to inspection notification confirmation.
• Check all inspection reports received from internal and external inspectors, ensuring their correct distribution and filing in the SAP system.
• Verify satisfactory conditions and ensure the timely issuance of the Inspection Release Note in SAP after a positive final test result.
• Manage Non-Conformity Reports and Punch Lists in cases of unsatisfactory inspections.
• Ensure the review and approval of vendor Manufactured Data Books and the timely issuance of the Final Test Certificate in SAP.
• Conduct performance evaluations of external (agency) inspectors using the I-PERF system.

Qualifications and Experience

• A minimum of +10 years of experience in a relevant quality control supervisory role.

Required Skills

• Quality Control
• Supply Chain Management
• SAP

Work Location and Type

This is a full-time position based in Al Khobar, Eastern Province, Saudi Arabia.

About the Role

Target Engineering Construction Co LLC is seeking a Quality Assurance Quality Control Supervisor with extensive experience to join their team in Al Khobar, Saudi Arabia. With over 50 years of expertise in EPC and industrial infrastructure, the company specializes in delivering large-scale projects. This role is critical for ensuring the quality compliance of civil procurement activities for Aramco-approved projects, contributing to the company's established reputation in the energy, marine, and civil infrastructure sectors.

As a Procurement Quality Supervisor, you will be responsible for upholding stringent quality standards throughout the procurement process. Your work will ensure that all procured civil materials, equipment, and services meet the requirements of Aramco and project specifications. This position offers the opportunity to contribute to significant energy projects within a company known for its deep technical expertise.

Key Responsibilities

• Supervise and monitor the quality compliance of all civil procurement activities.
• Review and approve material submittals, vendor documents, and Inspection and Test Plans (ITPs).
• Coordinate effectively with Procurement, Engineering, QA/QC departments, and external vendors.
• Conduct vendor inspections, audits, and evaluations to ensure adherence to quality standards.
• Verify that all procured materials meet Aramco standards, including SAES and SAMSS, as well as specific project specifications.
• Manage Non-Conformance Reports (NCRs), implement corrective actions, and prepare comprehensive quality reports.
• Support the pre-qualification process and technical evaluation of potential suppliers.

Required Qualifications and Experience

• A minimum of 5 to 10 years of experience in procurement quality or civil works.
• Proven experience in Oil & Gas / EPC / Infrastructure projects.
• Demonstrated experience in Civil Procurement for large-scale projects.
• Experience in vendor inspection and material compliance is essential.
• Must be Aramco approved.

Essential Skills

• Strong knowledge of Aramco standards and QA/QC procedures.
• Excellent communication and coordination skills.
• Proficiency in Procurement Quality management.
• Expertise in Civil Works quality assurance.
• Experience with Oil & Gas / EPC / Infrastructure projects.
• Skilled in Civil Procurement processes.
• Competent in Vendor inspection and Material compliance.

Work Location and Details

This is a full-time position based in Al Khobar, Eastern Province, Saudi Arabia.

About the Role

Napco National is seeking a diligent and detail-oriented QC Inspector to join our team in Makkah. This full-time position offers an opportunity for individuals with 0-1 years of experience to contribute to our commitment to quality and manufacturing excellence. The QC Inspector will play a crucial role in ensuring that our products meet stringent quality standards throughout the manufacturing process.

This role involves systematically monitoring and evaluating the entire manufacturing process to ensure adherence to quality standards and to drive continuous improvements in engineering and manufacturing. The successful candidate will be responsible for inspecting and testing various materials and products, utilizing lab equipment, and identifying any deviations from established standards.

Key Responsibilities

• Monitor, collect, and interpret a range of raw data from various sources to evaluate and analyze results.
• Create reports based on data analysis to assist in the decision-making process across different work aspects.
• Organize and plan work and project activities to efficiently accomplish tasks and meet short and long-term objectives.
• Operate all steps and activities for required production machines according to Standard Operating Procedures (SOP) or other applicable instructions.
• Systematically monitor and evaluate the entire manufacturing process to ensure quality standards are attained.
• Drive engineering and manufacturing process improvements based on evaluations and data.
• Inspect and test tools, spare parts, raw materials, work in progress, and finished products.
• Utilize simple to complex lab equipment for inspection and testing against performance and standard limits.
• Ensure all inspections and tests are conducted according to engineering and procedural standards to uncover and address deviations.

Qualifications and Requirements

• 0-1 years of relevant experience.

Required Skills

• Data Collection
• Data Analysis
• Reporting
• Work Planning
• Project Management
• Understanding and adherence to Standard Operating Procedures (SOP)
• Manufacturing Process Monitoring
• Quality Assurance principles
• Process Improvement methodologies
• Inspection techniques
• Testing procedures
• Lab Equipment Operation

Work Environment

This is a full-time position based in Makkah, within the Makkah Region.

About the Role

WSP Middle East is seeking a Quality Assurance/Quality Control (QA/QC) Inspector to join their team in Jeddah, Makkah, Saudi Arabia. This full-time role is essential for ensuring high quality and compliance in infrastructure projects. The incumbent will contribute to a global team of over 69,000 employees, offering an opportunity to make a positive impact in communities.

Role Responsibilities

• Conduct comprehensive field inspections of stormwater, sewerage, utilities, and transport infrastructure works to ensure adherence to project standards.
• Verify that all construction activities are performed in strict compliance with approved drawings, project specifications, and defined work data.
• Review and effectively manage Work Inspection Requests (WIRs), Material Inspection Requests (MIRs), and Inspection and Test Plans (ITPs).
• Proactively identify non-conformances, issue Non-Conformance Reports (NCRs), and ensure timely implementation of corrective actions.
• Monitor contractor activities on-site to ensure the highest quality standards and compliance are maintained throughout the project lifecycle.
• Inspect critical construction processes including excavations, backfilling, pipe laying, and installation of various utilities.
• Facilitate seamless coordination and communication between consultants, contractors, and internal QA/QC teams at the project site.
• Maintain comprehensive and organized QA/QC documentation, including detailed reports and accurate inspection records.
• Provide essential support for all testing activities, field inspections, and the crucial project handover process.

Qualifications and Requirements

• Must be a Saudi national.
• Hold a Diploma or Bachelor's degree in Civil Engineering.
• 2 to 8 years of relevant experience in QA/QC, with a focus on infrastructure or utilities projects.
• Hands-on experience in the construction of sewerage systems, roads, or underground utilities.
• Strong understanding of Inspection and Test Plans (ITPs), Non-Conformance Reports (NCRs), Work Inspection Requests (WIRs), and Material Inspection Requests (MIRs).
• Familiarity with the Saudi Building Code (SBC) and relevant local standards.
• Previous experience working on field infrastructure projects within the Kingdom of Saudi Arabia.
• Ability to accurately read and interpret engineering drawings.
• Capability to effectively coordinate with various project stakeholders.
• Registration with the Saudi Council of Engineers is preferred.

Core Skills

• Experience in QA/QC for stormwater and sewerage networks.
• Proficiency in inspecting and managing utility and transport infrastructure projects.
• Strong knowledge and application of ITPs, NCRs, WIRs, and MIRs.
• Familiarity with the Saudi Building Code (SBC) and local standards.
• Ability to interpret engineering drawings.
• Excellent coordination and stakeholder management skills.

Job Details

This is a full-time position requiring 2 to 5 years of experience. The work location is Jeddah, Makkah, Saudi Arabia.