Remote Jobs in Saudi Arabia

About the Role

Air Products is seeking an experienced ICS Cybersecurity Engineer for the NEOM Green Hydrogen Project in Duba, Tabuk Region, Saudi Arabia. This role is a key part of the Cybersecurity task force, focused on ensuring the security of Industrial Control Systems (ICS) and Operational Technology (OT) infrastructure. You will verify cyber assets against project specifications and site acceptance criteria, acting as a liaison between Air Products' project execution, commissioning teams, and vendors. This position contributes to a large-scale capital project, impacting the safety, security, and compliance of the NEOM Green Hydrogen Company (NGHC) project, supporting asset transitions through pre-commissioning, commissioning, start-up, and handover phases while maintaining project schedules.

Key Responsibilities

• Perform field verification of cyber asset design, implementation, and testing to ensure compliance with cybersecurity standards, regulatory requirements, and project specifications.
• Develop, document, and maintain the cybersecurity asset register and other key deliverables under the guidance of the Site Cybersecurity Lead or Cybersecurity Manager.
• Organize and facilitate the resolution and implementation of cybersecurity risk assessment recommendations for Air Products' designs and vendor/skid package control systems.
• Support pre-commissioning and commissioning teams by validating firewall rules, secure remote access configurations, endpoint hardening, asset inventory, access control execution, and logging prior to system energization.
• Lead and oversee the development, execution, and performance testing of architecture, standards, and FAT/SAT/CSAT procedures.
• Ensure the verification and approval of third-party device access requests from subcontractors and vendors during commissioning and start-up.
• Participate in technical coordination meetings with cross-functional teams as directed by the Site Cybersecurity Lead.
• Coordinate with vendors and the Air Products engineering team to resolve and close out punch list items identified during cyber asset field verification.
• Assist the Site Cybersecurity Lead with change management activities, reviewing cybersecurity scope for schedule and budget compliance throughout design, procurement, installation, commissioning, and startup.
• Prepare weekly updates and dashboards for the Site Cybersecurity Lead and the Project Cybersecurity Collaboration Lead.
• Identify and escalate risks and opportunities, and collect and report lessons learned during vendor site visits and project execution.
• Support OT cybersecurity handovers to operations, including procedures, asset inventories, access management, and incident response alignment.
• Contribute to the development of the OT Cybersecurity Operations Model, encompassing monitoring, patching, backup, disaster recovery, and secure remote support.

Qualifications and Requirements

• Bachelor's degree in Engineering (Electronics & Communication, or Instrumentation/Process Automation background preferred) or equivalent.
• A minimum of 10 to 15 years of experience in Operational Technology (OT) or a related field, with at least 3 years specifically focused on designing, building, or validating the cybersecurity of industrial control systems and networks.
• Proven project implementation experience with Saudi cyber standards (HCIS, NCA, CRA compliance) and ISA 62443 industry standards, specifications, and regulations.
• Strong knowledge of control systems (SCADA/DCS/PLCs) and relevant protocols (Modbus, PROFINET, DNP3, IEC61850, etc.).
• In-depth understanding of key cybersecurity technologies for ICS/OT networks, including Firewalls, Intrusion Detection Systems (IDS), Anti-Virus solutions, and Vulnerability Assessment tools.
• Experience supporting large-scale construction, pre-commissioning, commissioning, startup, and handover phases, ensuring cybersecurity controls are implemented without impacting schedule critical activities.

Required Skills and Competencies

• ICS Cybersecurity principles and practices.
• Cybersecurity standards and regulatory requirements.
• Understanding of cybersecurity technologies, processes, procedures, and specifications.
• Cybersecurity asset register management.
• Risk assessment and mitigation strategies.
• Firewall rule configuration and validation.
• Secure remote access implementation.
• Endpoint hardening techniques.
• Asset inventory validation.
• Access control execution.
• Logging and monitoring practices.
• Architecture and standards development.
• FAT/SAT/CSAT procedures.
• Third-party device access management.
• Technical coordination and communication.
• Change management processes.
• OT cybersecurity handovers and incident response alignment.
• OT Cybersecurity Operations Model development, including monitoring, patching, backup, disaster recovery, and secure remote support.
• Proficiency with Operational Technology (OT) and Industrial Control Systems (ICS) cybersecurity concepts.
• Familiarity with Saudi cyber standards (HCIS, NCA, CRA) and ISA 62443 Industry standards.
• Knowledge of control systems (SCADA/DCS/PLCs) and protocols (Modbus, PROFINET, DNP3, IEC61850).
• Experience with Firewalls, IDS, Anti-Virus, and Vulnerability Assessments.
• Relevant OT/ICS cybersecurity certifications (*, ISA/IEC62443, SANS) are preferred.
• Additional cybersecurity certifications such as CISSP, CISM, ISO 27001 are advantageous.
• Advanced proficiency in Microsoft Office Suite (Teams, SharePoint, Word, Excel, PowerPoint, Visio).
• Excellent written and verbal communication skills, with the ability to communicate effectively at all organizational levels.

Work Environment and Schedule

This is a full-time, site-based position located in Duba, Tabuk Region, Saudi Arabia. The role operates on a rotation schedule of 8 weeks on and 2 weeks off.

About the Role

Air Products, a global leader in industrial gases founded in 1940, is dedicated to operational excellence, safety, and environmental stewardship. The company is reimagining possibilities through its people's motivation and collective experience to drive innovation. The NEOM Green Hydrogen Project is a significant undertaking for Air Products, involving the design, build, and delivery of Process Controls/Process Automation Systems and IT/Digital Technology infrastructure. This role is critical for ensuring the cybersecurity compliance, resilience, and safe operation of essential power generation and transmission systems that support large-scale renewable energy assets.

The Cybersecurity Engineer – Renewable Power Sector functions as a senior technical individual contributor within the Project Cybersecurity Taskforce. This position is site-based in Duba, Tabuk Region, Saudi Arabia, operating on an 8 Weeks ON / 2 Weeks OFF rotation. The engineer will act as the technical liaison between Air Products project execution, commissioning teams, and vendors, ensuring effective implementation of cybersecurity controls without compromising critical project schedules.

Key Responsibilities

• Conduct field verification and validation of cybersecurity design and implementation for renewable power generation and transmission assets, ensuring adherence to Saudi and international standards.
• Assure cybersecurity controls for Solar PV plants, Wind Turbine systems, BESS, HV/MV substations, and grid interconnections, including PPC and EMS interfaces.
• Develop, maintain, and verify OT cybersecurity asset registers, network diagrams, zone-conduit models, and risk registers for power systems.
• Lead and support cyber risk assessments for power packages and OEM skid systems, tracking and closing mitigation actions with vendors and contractors.
• Support pre-commissioning and commissioning activities by validating firewall rules, secure remote access, endpoint hardening, role-based access control, logging, and monitoring prior to system energization.
• Oversee and participate in FAT, SAT, CSAT, and performance testing for substation automation systems, turbine control systems, and plant SCADA.
• Coordinate with subcontractors and OEMs to manage third-party access, remote connectivity, and cybersecurity compliance during construction and startup phases.
• Serve as the technical cybersecurity interface between project execution, commissioning teams, OEMs, grid operators, and client representatives.
• Support change management processes by reviewing and approving cybersecurity impacts of design, procurement, installation, and commissioning changes.
• Contribute to the OT cybersecurity handover to operations, including procedures, access governance, incident response alignment, backup, recovery, and secure remote support models.

Qualifications and Experience

• Bachelor's degree in Engineering (Electronics & Communication, or Instrumentation/Process Automation background preferred) or an equivalent qualification.
• A minimum of 10 to 15 years of experience in Operational Technology (OT) or a related field, with at least 3 years focused on designing, building, or validating the design/implementation of cybersecurity for industrial control systems and networks.
• Experience with project implementation involving Saudi cyber standards (HCIS, NCA) or ISA 62443 industry standards, specifications, regulations, and best practices.
• Strong knowledge of control systems (SAS, SCADA/DCS/PLCs, etc.), including Wind Turbine systems, relevant protocols (Modbus, PROFINET, DNP3, IEC61850, etc.), and key technologies such as Firewalls, IDS, Anti-Virus, and Vulnerability assessments within ICS/OT networks.
• Relevant OT/ICS cybersecurity accreditations such as ISA/IEC62443, SANS, or other internationally recognized certifications are preferred.

Technical Skills and Proficiencies

• Cybersecurity principles and practices within Operational Technology (OT) and Industrial Control Systems (ICS).
• Understanding of renewable power generation and power transmission systems, including Solar PV, Wind Turbine Systems, BESS, HV/MV Substations, and Grid Interfaces.
• Familiarity with Process Controls, Process Automation Systems, and IT/Digital Technology Infrastructure.
• Proficiency in implementing and verifying cybersecurity controls, ensuring resilience and safe operation.
• Experience with field verification, cyber risk assessments, and mitigation actions.
• Knowledge of firewall rules, secure remote access, endpoint hardening, role-based access control, logging, and monitoring.
• Experience with Factory Acceptance Testing (FAT), Site Acceptance Testing (SAT), Cybersecurity Acceptance Testing (CSAT), and performance testing for substation automation systems, turbine control systems, and plant SCADA.
• Ability to manage third-party access and remote connectivity.
• Understanding of change management processes in relation to cybersecurity.
• Familiarity with incident response, backup and recovery, and secure remote support models.
• Knowledge of Saudi Cyber Standards (HCIS, NCA) and ISA 62443.
• Familiarity with protocols such as Modbus, PROFINET, DNP3, and IEC61850.
• Experience with Intrusion Detection Systems (IDS) and vulnerability assessments.
• Advanced skills in Microsoft Office Suite, including Teams, SharePoint, Word, Excel, PowerPoint, and Visio.

Work Location and Arrangement

This is a full-time, site-based position located in Duba, Tabuk Region, Saudi Arabia. The work arrangement follows an 8 Weeks ON / 2 Weeks OFF rotation schedule.

Communication and Collaboration

The role requires excellent communication skills, enabling effective interaction at all organizational levels, both verbally and in writing. The engineer will act as a key technical interface, coordinating with project execution teams, commissioning personnel, OEMs, grid operators, and client representatives to ensure seamless integration and compliance.

• Create and implement strategic sales and marketing plans to achieve business objectives.
• Execute full business development and sales cycles from presentation to closing deals.
• Develop relationships with key clients, negotiating major contracts.
• Provide strategic input for navigating the market effectively.
• Maintain a qualified pipeline to meet and exceed bookings targets.
• Work closely with the leadership to develop regional strategies.

• 5-10 years of experience in sales within the public sector, particularly in health care.
• Strong background in radiology and imaging systems.
• Excellent communication and negotiation skills.
• Fluency in English, with additional languages being a plus.
• Willingness to travel frequently across the region (up to 50%).

• Innovate for global good with pioneering AI technology.
• Collaborate with a diverse team across continents.
• Access support for career development and flexible working arrangements.

About the Role

Bechtel Corporation is seeking an experienced Lead Cost Engineer to join the team for the Ar Rjum Project in Dhalam, Makkah, Saudi Arabia. This greenfield gold project encompasses open-pit mining, a processing plant, tailings management facilities, and supporting infrastructure. The Lead Cost Engineer will provide expert guidance and recommendations for cost engineering activities to ensure financial control and success of this complex undertaking.

With a history dating back to 1898, Bechtel is recognized for its contributions to infrastructure, energy, and mining & metals projects. This role offers an opportunity to contribute to a project that aims to create jobs, stimulate economic growth, and improve essential services in the region.

Key Responsibilities

• Provide input, guidance, and recommendations for cost engineering requirements, including staffing and project control.
• Prepare detailed staffing plans for cost engineering activities.
• Review proposal provisions related to cost engineering and material control.
• Develop supporting data for contract negotiations.
• Participate in establishing pricing structures for estimates.
• Oversee estimating, analysis, and control activities for projects with significant non-routine requirements or those demanding a high degree of technical skill.
• Analyze cost engineering challenges to provide solutions.
• Develop and implement project requirements for cost control in accordance with Bechtel and client contractual requirements, objectives, and procedures.
• Ensure work is completed as scheduled, supporting project organizational and administrative activities.
• Prepare cost studies utilizing historical data, statistical analysis, and cost and quantity comparisons.
• Review identified cost trends for cost effectiveness and suggest alternatives when appropriate.
• Maintain open communications with other organizations to support cost engineering analysis and control activities.
• Direct project cost engineering, including cost control and analysis, cost reporting, and incurred cost assessment.
• Conduct meetings related to project cost engineering.
• Establish criteria for Project Controls cost activities.
• Manage cost and commitment analysis and incurred cost analysis.

Qualifications and Requirements

• Requires a bachelor's degree (or international equivalent) and 10-13 years of relevant experience, or 14-17 years of relevant work experience.
• Experience in directing project cost engineering, including cost control and analysis, cost reporting, and incurred cost assessment.
• Experience in establishing criteria for Project Controls cost activities.
• Experience in cost and commitment and incurred cost analysis and management.
• Advanced knowledge of engineering, procurement, contracts, construction, and start-up work processes as performed by Bechtel.
• Knowledge of engineering and construction management customarily acquired over time through specialized instruction or practical experience.

Required Skills

• Cost Engineering
• Cost Control
• Cost Analysis
• Cost Reporting
• Incurred Cost Assessment
• Project Controls
• Cost and Commitment Analysis
• Oral and Written Communication
• Engineering
• Procurement
• Contracts
• Construction
• Start-up Work Processes
• Engineering and Construction Management

Work Environment

This is a full-time, office/project-based role located in Dhalam, Makkah, Saudi Arabia. Relocation assistance is authorized for international candidates, including camp accommodation. The role is situated within the Makkah and Taif regions.

About the Role

Bechtel Corporation is seeking an experienced Camp Supervisor for the Ar Rjum Project in Dhalam, Makkah, Saudi Arabia. This role is responsible for overseeing the operations of the accommodation facility, ensuring high standards in accommodation, catering, cleaning, maintenance, and essential services. The Camp Supervisor will act as the Bechtel representative, monitoring contractor performance and addressing issues to maintain a conducive living environment for the project workforce. The Ar Rjum Project is a significant greenfield gold development located in the Central Arabian Gold Region, approximately 200 km northeast of Taif. This position requires full-time residence within the project's accommodation facility.

Key Responsibilities

• Supervise the Accommodation Services Contract, ensuring compliance with scope, Key Performance Indicators (KPIs), service levels, and contractual obligations.
• Conduct daily inspections of accommodation blocks, dining halls, kitchens, recreation areas, and maintenance activities to ensure adherence to standards.
• Review contractor reports on maintenance, cleaning, catering, incidents, and complaints, ensuring timely corrective actions.
• Ensure the contractor maintains high standards of cleanliness, sanitation, hygiene, room readiness, and overall facility presentation.
• Monitor contractor performance trends and escalate recurring issues for continuous improvement.
• Participate in contractor meetings to review performance, discuss challenges, and implement improvement actions.
• Verify that accommodation, housekeeping, laundry, catering, waste management, and recreation services meet quality, safety, and hygiene standards.
• Oversee food service operations to ensure compliance with food safety requirements, such as HACCP or national equivalents.
• Ensure daily meals meet required quality, nutritional, and service standards.
• Address resident feedback, complaints, and satisfaction issues promptly.
• Oversee facility maintenance and preventive maintenance programs, ensuring timely resolution of defects.
• Coordinate with the contractor on repairs, planned shutdowns, hazard mitigation, and service continuity.
• Track and ensure prompt resolution of warranty issues related to the facility.
• Ensure the contractor adheres to all project safety, environmental, and health requirements.
• Conduct safety observations and participate in safety meetings and toolbox talks.
• Serve as the primary point of contact for accommodation-related matters for internal project teams.
• Coordinate with the Security department on site access protocols and emergency procedures.
• Liaise with the Logistics team to manage transportation arrangements for residents.
• Support crisis management and emergency response planning for the accommodation facility.
• Prepare daily, weekly, and monthly reports on facility conditions, contractor performance, risks, and improvement actions.
• Validate contractor-submitted data, including headcounts, occupancy rates, meal counts, and maintenance logs.
• Contribute to historical records, continuous improvement initiatives, and lessons learned documentation.
• Support arrangements for overflow or external accommodation when required.
• Represent the project during regulatory or third-party inspections of the accommodation facility.
• Ensure all activities within the accommodation precinct align with project safety, environmental, and ethical requirements.

Qualifications and Experience

• Bachelor's degree (or international equivalent) and 8-10 years of relevant experience, OR 12-14 years of relevant work experience.
• Minimum of 10 years of experience supervising accommodation, hospitality, hotel, camp, or village operations, with a preference for experience in large-scale or remote project environments.
• Demonstrated experience overseeing outsourced accommodation or facility services contractors.
• Strong understanding of catering, housekeeping, cleaning, laundry, maintenance, and essential services operations.
• Sound knowledge of food safety and hygiene standards, such as HACCP or national equivalents.
• Proven experience in conducting inspections, managing service standards, and resolving operational issues.
• Strong communication, stakeholder management, and problem-solving skills.
• Proven organizational capability with the ability to manage multiple operational priorities.
• Experience in preparing detailed reports, reviewing contractor KPIs, and validating operational data.

Required Skills

• Supervising accommodation, hospitality, hotel, camp, or village operations.
• Overseeing outsourced accommodation or facility services contractors.
• Expertise in catering, housekeeping, cleaning, laundry, maintenance, and essential services operations.
• Proficiency in food safety and hygiene standards.
• Skilled in conducting inspections and managing service standards.
• Adept at resolving operational issues.
• Excellent communication and stakeholder management abilities.
• Strong problem-solving capabilities.
• High level of organizational capability and the ability to manage multiple operational priorities.
• Proficient in preparing reports, reviewing contractor KPIs, and validating operational data.

Work Environment and Location

This is a full-time, on-site position located in Dhalam, Makkah, Saudi Arabia. The role requires full-time residence within the project's accommodation facility. Relocation to the site is authorized.

About the Role

Bechtel Corporation is seeking a General Superintendent 4 - Electrical & Instrumentation Process Plant for a full-time position on the Ar Rjum Project in Dhalam, Makkah, Saudi Arabia. This role is essential for overseeing and coordinating subcontractor activities on a complex greenfield gold project, ensuring adherence to schedules, safety standards, and quality specifications. The position contributes to building projects that support economic growth and infrastructure development in the region.

The Ar Rjum Project encompasses multiple open-pit mining operations, a processing plant, tailings management facilities, and supporting infrastructure. Located in the Central Arabian Gold Region, approximately 200 km northeast of Taif, this project is a significant mining endeavor.

Key Responsibilities

• Monitor and direct subcontractor activities through coordination and instruction of their management staff within the designated area of responsibility.
• Review and monitor subcontractor construction schedules, resource charts, and material and equipment requirements.
• Approve, where necessary, subcontractor construction methods, schedules, manning charts, and material and equipment requirements.
• Lead the construction operations impact on external interfaces to ensure alignment with overall established project schedules.
• Monitor the installation of materials and equipment to assure conformance with drawings, specifications, vendor requirements, and other project stipulations.
• Implement and enforce policies, procedures, and related work rules as established by field construction management.
• Collaborate with Construction Field Engineers, Foremen, and Craft Professionals in interpreting Engineering design documents, vendor documents, and other technical documents.
• Coordinate engineering solutions with Subcontractors, Foremen, and Craft Professionals.
• Coordinate with the Design team on constructability issues.

Qualifications and Experience

• Bachelor's degree (or international equivalent) and 10-13 years of relevant experience, OR 14-17 years of relevant work experience.
• Extensive experience managing Electrical & Instrumentation (E&I) scope in large mineral processing plants.
• Previous experience on gold processing plants.
• Previous experience in mining & metals processing plants within the MENA region.
• Extensive experience working with High Voltage (HV) and Medium Voltage (MV) equipment, cabling, and terminations.
• Extensive experience in the pre-commissioning of HV/MV installations and large mineral processing plants.

Required Skills

• Electrical & Instrumentation (E&I) scope management in large mineral processing plants.
• Experience with gold processing plants.
• Experience in mining & metals processing plants within the MENA region.
• Proficiency in working with HV/MV equipment, cabling, and terminations.
• Expertise in pre-commissioning of HV/MV installations and large mineral processing plants.

Work Location and Type

This is a full-time position located in Dhalam, Makkah, Saudi Arabia, with work taking place at the project site. Relocation is authorized for international candidates, with camp accommodation provided. The role is office/project-based.

About the Role

Bechtel Corporation is seeking an experienced CSA Design Engineer to join their team for the Ar Rjum Project in Riyadh, Saudi Arabia. This full-time position is integral to a significant greenfield gold project, which includes open pit mining operations, a processing plant, tailings management facilities, and supporting infrastructure. The CSA Design Engineer will be responsible for conducting field investigations, client interviews, and leading the design, development, modification, and evaluation of civil and structural components and processes. This role is crucial for meeting the unique and complex requirements of this large-scale mining project.

Key Responsibilities

• Plan and conduct independent scopes of work and technical specifications for Civil/Structural design and field investigations on large-sized projects or assignments in support of a global business unit.
• Lead the design, development, modification, and evaluation of Civil/Structural components and processes, utilizing relevant Engineering Department Procedures (EDPs), design standards and guides, and Bechtel Standard Application Programs (BSAPs).
• Review and approve key design documents, supplier drawings and data, material specifications, drawings, change orders, and bid summaries for the assigned project.
• Design structures using advanced knowledge of structural analysis, including statics, dynamics, and materials engineering.
• Determine the appropriate use of various structural elements such as steel, wood, masonry, and concrete to ensure the correct material is used based on load or stress requirements.
• Originate and check complex Civil/Structural engineering deliverables, including steel and concrete calculations, specifications, and material requisitions.
• Develop conceptual designs for Civil/Structural engineering projects or projects with specialized or unique requirements.
• Interview client personnel to determine their needs, develop scopes for cost estimates, and participate in proposal preparation and presentation.
• Prepare or oversee the preparation of discipline estimates and work plans in accordance with project scope, schedule, and budget, and support implementation and assist with performance reporting.
• Interpret new or special regulations, codes, standards, criteria, and performance data.

Qualifications and Experience

This role requires a bachelor's or master's degree (or international equivalent) combined with 13-15 years of relevant experience. Alternatively, candidates with 17-19 years of relevant work experience will be considered.

Required Skills and Expertise

• Advanced proficiency in Civil/Structural design.
• Expertise in structural analysis, including statics and dynamics.
• Strong knowledge of materials engineering.
• Experience in developing cost estimates.
• Proficiency in conducting constructability reviews.
• Familiarity with Engineering Department Procedures (EDPs).
• Experience with Bechtel Standard Application Programs (BSAPs).
• Recognized as an advanced contributor with a specialized skill set and considered a subject matter expert within the discipline.
• Ability to use professional concepts and company objectives to resolve complex issues in creative and effective ways.

Work Location and Details

The position is a full-time role based in Riyadh, Saudi Arabia. The project is located within the Central Arabian Gold Region, approximately 200 km north-east of Taif towards Riyadh and about 26 km South of Al Mouwayh. Relocation assistance is authorized for international candidates on a single status. This is a full-time office/project-based role.

About the Role

Bechtel Corporation is seeking a Planning Manager to lead the planning and scheduling function for the Ar Rjum Project, a greenfield gold project located in Dhalam, Makkah, Saudi Arabia. This role is essential for integrating detailed engineering, procurement, construction, and start-up activities into a cohesive and accurate project schedule. The Planning Manager will collaborate with discipline teams, subcontractors, and project leadership to maintain schedule integrity, identify risks, and develop recovery plans, contributing to safe, predictable, and efficient project delivery.

Bechtel has a long history of completing transformative projects globally since 1898. The Ar Rjum Project involves multiple open-pit mining operations, a processing plant, tailings management facilities, and supporting infrastructure. This position offers an opportunity to contribute to a significant project in a dynamic region.

Key Responsibilities

• Lead the development, maintenance, and analysis of project schedules across all disciplines.
• Supervise the estimation of schedule durations and validate discipline-specific inputs against key project milestones.
• Integrate resources, including quantities, job hours, manpower, and bulk commodities, into the project schedule and maintain installation curves.
• Manage resource loading, leveling, and staffing plans to align with project execution needs.
• Conduct critical path analyses, evaluate schedule variances, and report on schedule performance.
• Coordinate with engineering, procurement, construction teams, and subcontractors to gather schedule inputs.
• Identify potential schedule restraints, critical interfaces, and interdisciplinary impacts, recommending solutions.
• Conduct weekly look-ahead planning sessions and lead monthly schedule review meetings.
• Maintain a register of critical actions, risks, and potential schedule deviations.
• Prepare Schedule Impact Reports and lead the development of schedule recovery strategies, including resource and cost implications.
• Support schedule studies, scenario modeling, and alternative execution analyses.
• Review subcontractor schedules and provide recommendations for alignment with overall project requirements.
• Present schedule information, insights, and performance data to project management and client representatives.

Qualifications and Requirements

• Bachelor's degree in Engineering, Construction Management, or a related field.
• A minimum of 15 years of project controls experience with a strong emphasis on planning and scheduling.
• Advanced understanding of EPCM (Engineering, Procurement, Construction, and Management) work processes, from engineering through start-up.
• Proven experience in Smelter or Refinery projects is mandatory.
• Demonstrated ability to work effectively and collaboratively within diverse, multicultural environments.
• Excellent written and verbal communication skills.
• Prior experience working in the Middle East region is preferred.

Required Skills

• Proficiency in Bechtel's discipline-specific software, including Primavera P6 and Microsoft Office Applications.
• Ability to independently plan, organize, direct, perform, review, and present schedule products with minimal supervision, utilizing professional judgment in technical planning, scheduling, engineering design, construction, and procurement practices.
• Working knowledge of data analytics software applications such as Power BI.
• Full proficiency in existing data sources and tools like Excel, with all outputs expected in Power BI.
• Experience in leading and managing a team of Project Control engineers.
• Strong planning and scheduling capabilities.
• Effective leadership and team management skills.
• Excellent communication and interpersonal skills.

Work Environment and Location

This is a full-time, office/project-based role located in Dhalam, Makkah, Saudi Arabia. Relocation assistance is authorized for international candidates, including camp accommodation. The role requires a minimum of 10 years of experience.

About the Role

Uvera is seeking a skilled Automation Engineer to join its team in Jeddah, Makkah, Saudi Arabia. This full-time, on-site position is integral to the design, programming, and maintenance of control systems for food handling, storage, and processing facilities. The role focuses on ensuring the efficient, safe, and reliable operation of automated equipment, including conveyors, packaging, and labeling systems, thereby contributing to operational excellence.

This position requires hands-on technical expertise in Siemens TIA Portal programming, electrical panel design and assembly, and industrial network integration. A strong understanding of automated processes within the food industry is essential for optimizing automated systems and supporting digital transformation initiatives.

Key Responsibilities

• Design, develop, and implement automation and control systems for food handling equipment and facilities.
• Write PLC programs from scratch using Siemens TIA Portal, including OB/FB/FC block structure, HMI configuration, and Profinet device integration.
• Design electrical control panels from concept to completion, including schematic design, component selection and sizing, DIN rail layout, and wiring execution.
• Assemble, wire, and commission control panels to professional standards, ensuring proper cable ducting, ferrule crimping, wire numbering, and pre-power verification.
• Develop HMI and SCADA interfaces for process control and monitoring.
• Integrate sensors, VFDs, and field instruments into automated systems.
• Prepare comprehensive project documentation, including operating manuals and Factory/Site Acceptance Test (FAT/SAT) procedures.
• Troubleshoot and resolve automation and electrical faults to minimize production downtime.
• Maintain and update PLC programs, HMI configurations, wiring diagrams, and network documentation.
• Provide technical support to plant operators and maintenance teams.
• Ensure all automation systems comply with relevant safety and environmental regulations.
• Apply LOTO (Lockout/Tagout) and safe isolation procedures on all electrical and mechanical systems.
• Participate in risk assessments and develop safe work procedures for control systems.
• Write and conduct FAT/SAT tests to ensure system functionality and compliance.
• Analyze production data to identify opportunities for efficiency and throughput improvements.
• Implement control logic and data acquisition strategies to optimize energy use, equipment reliability, and line performance.
• Support digital transformation initiatives, such as predictive maintenance and remote monitoring.

Qualifications and Requirements

• Bachelor's degree in Electrical Engineering, Automation Engineering, Mechatronics, or a closely related field.
• 2 to 5 years of hands-on experience in industrial automation, with a preference for experience in food processing, packaging, or bulk materials handling environments.
• Proven experience writing Siemens TIA Portal PLC programs from scratch, including proficiency with block structure (OB, FB, FC, DB), Profinet device integration using GSDML files, and online commissioning and diagnostics.
• Hands-on experience designing and assembling electrical control panels, including schematic drawing, component sizing, DIN rail assembly, wiring, and pre-commissioning checks.
• Knowledge of industrial communication protocols such as Profinet, Modbus TCP, EtherNet/IP, and Profibus.
• Familiarity with instrumentation, Variable Frequency Drives (VFDs), and motor control systems.
• A solid understanding of process control, safety systems, and instrumentation calibration.

Required Skills

• Siemens TIA Portal programming
• Electrical panel design and assembly
• Industrial network integration
• PLC programming
• HMI configuration
• Profinet device integration
• SCADA interface development
• Sensor integration
• VFD integration
• Field instrument integration
• Troubleshooting automation and electrical faults
• LOTO procedures
• Risk assessment
• FAT/SAT testing
• Experience with Python, C/C++, or SQL for data acquisition or integration tasks (bonus)
• Familiarity with microcontrollers (ARM, AVR, or similar) for embedded control applications (bonus)
• Experience with SCADA systems and remote monitoring platforms (bonus)

Work Environment and Location

This is a full-time, on-site position located in Jeddah, Makkah, Saudi Arabia, specifically within the KAUST Research & Technology Park in Thuwal. Daily shuttle services are available between Jeddah and KAUST to facilitate transportation.

About the Role

MACNA, a Saudi-owned company and part of the Al Blagha Group since 1996, specializes in marine mobility solutions with a fleet of over 30 vessels for passenger and cargo transport. As a key partner for high-speed passenger ferries and landing craft in the Kingdom, MACNA is committed to safe, reliable, and customer-focused services. We are seeking an experienced Mooring Master / Deputy Marine Operations Manager to join our team in Umluj, Tabuk, Saudi Arabia. This role is crucial for supporting safe, efficient, and high-performance marine operations within a dynamic offshore project environment. The position involves overseeing the safe execution of vessel berthing and movements, and assisting the Marine Operations Manager with marine logistics, fleet scheduling, port operations, and vessel traffic control.

Key Responsibilities

• Serve as the Mooring Master for all vessel berthing and unberthing operations, providing navigational and mooring guidance to Vessel Masters.
• Continuously assess weather conditions, tides, and currents to determine and ensure safe operating parameters for all marine activities.
• Coordinate tugboat-assisted manoeuvres as necessary for safe and efficient vessel movement.
• Ensure the safe execution of passenger transfers and landing craft operations, adhering to all safety protocols.
• Verify the readiness and integrity of all berthing facilities, including fenders and mooring systems, prior to vessel operations.
• Support daily control of marine logistics and effective fleet coordination.
• Oversee the scheduling, dispatch, routing, and allocation of vessels to meet operational demands.
• Manage a mixed fleet including speed boats, High-Speed Crafts (HSCs), landing crafts, tugboats, barges, and marine ambulances.
• Assume the responsibilities of the Marine Operations Manager in their absence to ensure operational continuity.
• Lead and facilitate operational planning and coordination meetings with relevant stakeholders.
• Provide functional leadership and guidance to the Operations Control Center (OCC) team.
• Ensure effective vessel tracking, communication, and dispatch control from the OCC.
• Maintain clear and consistent communication channels between the OCC, Vessel Masters, and port teams.
• Ensure accurate and timely operational reporting and tracking updates are maintained.
• Supervise marine base activities and manage vessel traffic within the operational area.
• Manage berth allocation and optimize vessel turnaround efficiency at port facilities.
• Oversee passenger embarkation and disembarkation processes, as well as cargo handling operations.
• Ensure strict compliance with all applicable maritime and port regulations.
• Enforce company Health, Safety, and Environment (HSE) standards and all relevant maritime regulations.
• Ensure compliance with international maritime conventions, including SOLAS and MARPOL.
• Review and approve Risk Assessments (RA) and Job Safety Analyses (JSA) for all operations.
• Participate actively in incident investigations and emergency response activities as required.
• Ensure all vessels and crews maintain valid certifications and are operationally ready at all times.

Qualifications and Requirements

• Possess a Certificate of Competency (CoC) as a Master Mariner, or alternatively as a Chief Mate or 2nd Mate with substantial relevant experience.
• Hold valid STCW certifications.
• Possess 5 to 10 years of progressive experience within the marine industry.
• Demonstrate significant experience in vessel operations, marine logistics, port operations, or fleet coordination.
• Have prior experience operating or managing vessels such as crew boats, HSCs, landing crafts, tugboats, or similar craft.
• Experience with multi-vessel scheduling and managing high-frequency vessel movements is essential.
• Experience in offshore, remote-site, marine base, or island logistics environments is highly desirable.

Required Skills

• Strong knowledge of marine operations and port regulations.
• Practical expertise in mooring and berthing operations.
• Proven leadership and team management capabilities.
• Excellent communication and stakeholder coordination skills.
• Strong decision-making and problem-solving abilities.
• A steadfast commitment to safety excellence and operational discipline.

Work Environment

This is a full-time position based in Umluj, Tabuk, Saudi Arabia. Potential travel between Umluj and Tabuk cities may be required.

About the Role

Red Sea Global, through its subsidiary Red Sea Coastal Trading Company, is seeking a Manager - Warehouse Facilities & Operations Management. This role will oversee a new Central Distribution Centre in Umluj, Tabuk, Saudi Arabia, supporting the delivery of materials, equipment, and services for Red Sea Global's regenerative tourism projects. The position is responsible for ensuring a safe, compliant, and efficient environment for 24/7 supply chain operations, aligning with the company's commitment to efficiency, reliability, and environmental responsibility. The Red Sea Coastal Trading Company provides comprehensive supply chain management, including procurement support, transportation, inventory, warehouse management, and last-mile logistics, making this role critical for maintaining operational integrity and sustainability.

Key Responsibilities

• Oversee all hard and soft facilities management (FM) services at the Central Distribution Centre.
• Manage and monitor industrial air conditioning and climate control systems, including routine servicing and repairs.
• Ensure the maintenance, testing, and auditing of all Fire Fighting Systems, alarms, sprinklers, and suppression equipment to meet local regulatory codes.
• Coordinate preventative and corrective maintenance for building infrastructure, dock levelers, lighting, and backup power generators.
• Supervise external engineering contractors to ensure high-quality, timely repairs with minimal operational downtime.
• Manage the on-site cleaning team or third-party providers to maintain strict hygiene standards across the warehouse floor, offices, and welfare areas.
• Direct industrial, recyclable, and general waste streams, ensuring strict compliance with environmental regulations and corporate sustainability goals.
• Oversee routine monitoring and treatment programs for pest control tailored for large-scale logistics environments.
• Ensure safe access to loading bays, parking lots, and external perimeters through effective grounds maintenance.
• Serve as the primary point of contact for health, safety, and environmental (HSE) audits.
• Ensure all contractors complete risk assessments and method statements (RAMS) before commencing work.
• Maintain accurate records of statutory compliance certificates, building permits, and maintenance logs.
• Manage the site's annual FM operational budget (OpEx) and contribute to capital expenditure (CapEx) planning.
• Review contractor invoices, negotiate service level agreements (SLAs), and drive cost-saving initiatives.

Qualifications and Experience

Candidates should possess a minimum of 10 years of experience in Facilities Management, with a specific focus on large logistics centres, manufacturing hubs, or distribution warehouses. Proven experience in managing diverse teams of technical technicians and soft-service contractors is essential. The ability to respond promptly to site emergencies outside of standard working hours is also required.

Required Skills and Expertise

• Expertise in HVAC & AC Systems management and maintenance.
• Proficiency in Fire & Life Safety (FFS) systems and regulations.
• Strong capabilities in Asset Management for facilities.
• Effective Vendor Management skills.
• Experience in managing Janitorial & Cleaning services.
• Knowledge of Waste Management best practices and regulations.
• Competence in Pest Control strategies for industrial environments.
• Skills in Grounds Maintenance to ensure site accessibility and safety.
• Comprehensive understanding of Health, Safety, and Compliance requirements.
• Proficiency in Budget & Financial Control for operational and capital expenditures.
• A strong understanding of industrial HVAC systems.
• Knowledge of FFS Regulations.
• Familiarity with Automated Building Management Systems (BMS).
• Demonstrated Leadership qualities.
• Excellent Problem-Solving abilities.

Education and Additional Information

A Bachelor's degree in Engineering, Facilities Management, Business Administration, or a related field is required. Professional FM certifications such as ISO, IWFM, IFMA, or NEBOSH are highly desirable. This is a full-time position located in Umluj, Tabuk, Saudi Arabia.

About the Role

Emerson Automation Solutions is seeking a Sales Engineer to join the Fisher Flow Controls Business Unit within the Final Control Group. This role is instrumental in driving business growth and delivering innovative solutions to customers in the Saudi Arabian market. The position is based in Riyadh and involves managing allocated customers across Saudi Arabia and Bahrain. The role requires a proactive approach, frequent customer visits, and the ability to work autonomously and independently, with a focus on delivering quality products and services.

Emerson is committed to creating impactful solutions through technology and engineering. The company values individuals who are driven, passionate about robust and maintainable solutions, and capable of delivering quality products. The Sales Engineer will be key in building and maintaining strong relationships with key leaders and decision-makers, positioning Emerson as a preferred supplier for technology, products, services, and solutions.

Key Responsibilities

• Meet or exceed annual business goals and targets.
• Establish and develop strong relationships with key leaders at all levels within the designated Product and Account Portfolio.
• Leverage existing and develop new relationships with key executive decision-makers to position Flow Controls as the preferred supplier.
• Drive KOB2/3 opportunities throughout covered accounts by acting as a trusted advisor and offering solutions to customer problems.
• Develop, update, and manage the execution of comprehensive account and site plans covering all Flow Controls business units.
• Prepare and present growth plans, forecasts, pricing surveys, and competitor intelligence.
• Collaborate with other Emerson Automation Solutions Divisions to maximize pull-through content.
• Ensure Business Unit plans and key initiatives align with account plans and are implemented professionally and on time.
• Engage BU personnel support as needed to assist key sites.
• Establish and update long-term agreements for services, turnarounds, and parts.
• Analyze and develop plans with the LBP Sales force to drive competitive displacements and upgrades.
• Ensure strict adherence to Emerson Ethics and trade compliance procedures in all business transactions.
• Develop and manage KPIs on quotes to drive business efficiency.
• Follow up and support the closing of both entity and destination orders.
• Adhere to Health, Safety, and Environment policies as laid by the organization.

Qualifications and Requirements

• Instrumentation/Mechanical Engineering degree.
• Minimum of 2 years of experience with control valves.
• Minimum of 2 years of sales experience in the power and water sectors.
• Proven sales record.
• Proven background in proactive selling.
• Knowledge of control valves and industry applications.

Required Skills

• Sales expertise.
• Control Valve expertise.
• Power & Water industry knowledge.
• Proactive Selling capabilities.
• Strong business acumen and commercial awareness.
• Effective communication skills and ability to deliver business-based value messages.
• Problem-solving capabilities.
• Innovation mindset.
• Results-driven approach.
• Organizational Savvy.
• Interpersonal Savvy.
• Business Ethics & Integrity.

Work Environment and Location

This is a full-time position based in Riyadh, Saudi Arabia. The role requires frequent travel to customer sites, which necessitates working effectively in remote conditions. Emerson fosters a culture that values innovation and collaboration, investing in employee growth through mentorship and training opportunities.

About the Role

Eram Talent is seeking a skilled Technician, SCADA for a contract position within a leading organization located in Yanbu, Al Madinah, Saudi Arabia. This role is essential for ensuring the efficient and reliable operation of industrial processes and infrastructure through the management of Supervisory Control and Data Acquisition (SCADA) systems. The successful candidate will possess a strong technical background in control and instrumentation or industrial automation, with the capability to manage the installation, maintenance, and troubleshooting of complex SCADA systems.

Key Responsibilities

• Install, configure, and maintain SCADA hardware and software components to ensure optimal system performance.
• Continuously monitor SCADA systems to guarantee uninterrupted and stable operation.
• Perform SCADA system monitoring and operation tasks as required.
• Conduct troubleshooting and incident response for SCADA-related issues.
• Provide support for Programmable Logic Controllers (PLCs) and Remote Terminal Units (RTUs).
• Offer communication and network support for SCADA infrastructure.
• Manage alarms effectively and respond to alerts.
• Conduct both corrective maintenance (CM) and preventive maintenance (PM) activities.
• Execute regular preventive maintenance and system updates to maintain peak system efficiency.
• Collaborate with engineers and operations teams to implement system improvements and upgrades.
• Maintain comprehensive documentation of SCADA configurations, maintenance activities, and incident reports.
• Ensure strict adherence to safety standards and organizational policies.

Qualifications and Requirements

• Possess a technical diploma in control and instrumentation or industrial automation.
• Minimum of 5 years of experience working with SCADA systems within an industrial environment.
• Demonstrated experience in SCADA system monitoring and operation.
• Proven ability in troubleshooting and incident response, including PLC and RTU support, communication and network support, and alarm management.
• Experience in conducting both corrective and preventive maintenance (CM & PM) activities.
• Excellent problem-solving skills with a keen attention to detail.
• Good communication skills, enabling effective collaboration within a team environment.
• Willingness to work flexible hours, including providing on-call support as needed.

Required Skills

• SCADA Systems
• SCADA Hardware and Software Components
• SCADA System Monitoring & Operation
• Troubleshooting & Incident Response
• PLC and RTU Support
• Communication and Network Support
• Alarm Management
• Corrective and Preventive Maintenance (CM & PM) Activities
• Problem-Solving Skills
• Attention to Detail
• Communication Skills
• Teamwork

Work Environment and Location

This is a contract position based in Yanbu, Al Madinah, Saudi Arabia, with the primary work location in Yanbu and Medina. The role requires flexibility in working hours, including on-call support when necessary.

About the Role

Eram Talent is seeking a skilled Technician, SCADA to join a leading organization in Yanbu, Al Madinah, Saudi Arabia. This role is crucial for ensuring the efficient and reliable operation of industrial processes and infrastructure through the management of Supervisory Control and Data Acquisition (SCADA) systems. The position involves hands-on installation, ongoing maintenance, and proactive troubleshooting of these critical systems. This is a contract position requiring 5-10 years of experience, with primary work located in Yanbu, Al Madinah, Saudi Arabia, and potential work in Medina.

Key Responsibilities

• Install, configure, and maintain SCADA hardware and software components to ensure optimal system functionality.
• Monitor SCADA systems continuously to guarantee stable and uninterrupted operation.
• Perform SCADA system monitoring and operation tasks as required.
• Conduct troubleshooting and incident response for SCADA-related issues.
• Provide support for Programmable Logic Controllers (PLCs) and Remote Terminal Units (RTUs).
• Offer communication and network support for SCADA infrastructure.
• Manage alarms effectively and respond to alerts.
• Conduct both Corrective Maintenance (CM) and Preventive Maintenance (PM) activities for SCADA systems.
• Perform regular preventive maintenance and system updates to ensure peak system performance.
• Collaborate with engineers and operations teams to implement system improvements and upgrades.
• Maintain detailed documentation of SCADA configurations, maintenance activities, and incident reports.
• Ensure strict compliance with safety standards and organizational policies.

Qualifications and Requirements

• A technical diploma in Control and Instrumentation or Industrial Automation.
• A minimum of 5 years of experience working with SCADA systems within an industrial environment.
• Proficiency in SCADA system monitoring and operation.
• Strong capabilities in troubleshooting and incident response.
• Experience providing support for PLCs and RTUs.
• Experience offering communication and network support for SCADA systems.
• Expertise in alarm management.
• Capability to conduct both CM and PM activities.
• Excellent problem-solving skills and a keen attention to detail.
• Good communication skills and the ability to work collaboratively within a team environment.
• Willingness to work flexible hours, including on-call support as needed.

Required Skills

• SCADA Systems
• SCADA Hardware and Software Components
• SCADA System Monitoring & Operation
• Troubleshooting & Incident Response
• PLC and RTU Support
• Communication and Network Support
• Alarm Management
• Corrective and Preventive Maintenance (CM & PM) Activities
• Problem-Solving
• Attention to Detail
• Communication Skills
• Teamwork

Work Location and Type

The primary work location for this role is in Yanbu, Al Madinah, Saudi Arabia, with potential work also occurring in Medina. This is a contract position.