Maintenance Technician Jobs in Riyadh

About the Role

Al Yamamah Cement Company is seeking a qualified Mechanical Technician to join its Power Plant team in Riyadh, Saudi Arabia. This full-time role is essential for ensuring a reliable and uninterrupted power supply to the plant and its residential facilities. The successful candidate will be responsible for carrying out a range of mechanical maintenance activities on power generation units.

This position requires an individual with hands-on experience and a strong understanding of power plant operations, coupled with a commitment to maintaining high standards of safety and efficiency. You will play a key role in both routine operations and critical maintenance tasks.

Key Tasks and Responsibilities

• Monitor power generation units and associated equipment to ensure safe and efficient operation.
• Inspect engines, turbines, and auxiliary systems to identify maintenance requirements.
• Perform routine, preventive, and corrective maintenance activities on power generation equipment.
• Carry out troubleshooting, repair, overhaul, welding, and mechanical restoration work as needed.
• Monitor engine rooms and mechanical equipment areas to ensure proper operating conditions.
• Collect fuel and lubricant samples for testing and quality verification.
• Support planned shutdowns and emergency maintenance activities.
• Adhere to all safety procedures, maintenance standards, and operational requirements.

Required Qualifications and Experience

• Diploma in Mechanical Engineering or a related field.
• Minimum of 4 years of experience in mechanical maintenance.
• Proven hands-on experience in power plants.
• Proven hands-on experience with Wärtsilä engines.
• Specific experience with Wärtsilä 50DF Dual Fuel engines.
• Specific experience with Wärtsilä 18V32 engines.
• Specific experience with Wärtsilä 12V46DF engines.
• Experience working with natural gas engines.
• Experience in preventive and corrective maintenance of power generation equipment.

Core Skills

• Mechanical Maintenance
• Power Generation Equipment
• Troubleshooting
• Repair
• Overhaul
• Welding
• Mechanical Restoration
• Preventive Maintenance
• Corrective Maintenance
• Wärtsilä Engines (including Wärtsilä 50DF Dual Fuel engines, Wärtsilä 18V32 engines, and Wärtsilä 12V46DF engines)
• Natural Gas Engines

Job Details

Job Title: Mechanical Technician

Company: Al Yamamah Cement Company

Location: Riyadh, Saudi Arabia

Employment Type: Full-time

Required Experience: 2-5 years

About the Role

Abunayyan Holding, through its subsidiary Holystar Arabia, is seeking qualified maintenance technicians specializing in electrical and mechanical fields to join the maintenance department in Riyadh, Saudi Arabia. This full-time role aims to support operational performance in the electrical switchgear/manufacturing sector. The position focuses on ensuring the reliability and efficiency of machinery, equipment, and production lines through proactive preventive and corrective maintenance activities, while strictly adhering to safety procedures to maintain a safe working environment.

The Maintenance Technician will play a vital role in minimizing production downtime by effectively responding to breakdowns and malfunctions. This position requires a proactive approach to troubleshooting and repairing technical issues, applying best practices to minimize maintenance challenges, and optimizing energy efficiency. The successful candidate will contribute to the overall maintenance of site facilities in accordance with company standards and safety regulations.

Key Tasks and Responsibilities

• Perform planned maintenance activities for machinery, equipment, and production lines.
• Troubleshoot and repair technical and equipment-related issues to enhance production performance.
• Respond promptly to breakdowns and malfunctions to minimize production downtime.
• Apply best practices to minimize maintenance issues and optimize energy efficiency.
• Support the maintenance of site facilities in line with company standards and safety regulations.
• Adhere to occupational health and safety procedures at all times.
• Regularly check testing equipment to ensure safe and efficient operation.
• Complete all required maintenance documentation accurately and comprehensively.

Qualifications and Requirements

• Diploma in Electrical or Mechanical Engineering.
• Minimum of 3 to 5 years of experience in a manufacturing plant environment.
• Previous experience working with CNC sheet metal machinery, including laser cutting, punching, and bending machines.
• Experience working with robots and welding machines is preferred.
• Ability to read and interpret engineering drawings and control schematics.
• Strong troubleshooting and fault-finding skills.
• Must be self-motivated and able to work with minimal supervision.
• Demonstrate excellent accuracy and attention to detail.
• Strong commitment to safety and adherence to company procedures.

Technical Skills

• Electrical Maintenance
• Mechanical Maintenance
• Troubleshooting
• Fault Finding
• CNC Sheet Metal Machinery (Laser Cutting, Punching, Bending)
• Robotics
• Welding Machines
• Reading Engineering Drawings
• Reading Control Schematics
• Safety Procedures

Additional Job Information

This is a full-time position in Riyadh, Saudi Arabia, within the electrical switchgear/manufacturing sector. The role requires 2-5 years of experience in a relevant field.

About the Role

KONE, a certified Top Employer, is seeking a Maintenance Technician with a strong service mindset. This role is integral to KONE's operations, focusing on delivering quality service, ensuring equipment safety and performance, and maintaining proactive communication with customers and equipment users. The position contributes to KONE's commitment to collaboration, diversity, growth, and well-being.

Key Responsibilities

• Ensure customer satisfaction through high-quality service and proactive, precise on-site communication regarding callout ETAs and job performance.
• Provide accurate, real-time back-reporting of all work performed at the equipment level.
• Maintain accountability for the safety and optimal performance of all assigned equipment.
• Identify potential site risks and promptly communicate them to your supervisor.
• Take immediate on-site action in cases of high-risk identification and adhere to established escalation procedures.
• Proactively identify and report "unplanned" service repairs based on observed equipment needs.
• Uphold the safety of end-users and the site by adhering to safe working practices and executing operations in accordance with all maintenance and safety instructions.
• Execute planned maintenance, callouts, and service repairs efficiently, respecting schedules, time limits, quality standards, time allocations, and established processes.
• Identify and escalate potential sales leads to your supervisor.
• Ensure all service tooling, vans, instruments, and other equipment are kept safe, maintained, and in good working condition.

Qualifications and Requirements

• A minimum of 5 years of solid Preventive Maintenance experience with a reputable elevator company is mandatory.
• Candidates must possess an ITI/Vocational Certificate course or a Diploma in Engineering in Electrical/Electronics/Automation streams, or an equivalent qualification.
• Good verbal and written English communication skills are essential.
• Basic IT skills are preferred.
• Basic digital foundation skills are required for this position.
• Only candidates meeting all the above requirements should apply.

Required Skills

• Customer relationship management
• Service operations
• Preventive Maintenance
• Basic IT skills
• Basic digital foundation skills

Work Location and Type

This full-time position is based in Saudi Arabia, with opportunities to serve customers in both Makkah and Riyadh.

Company Commitment

KONE is committed to creating an innovative and collaborative working culture, valuing employee engagement, and promoting sustainability and ethical business practices. The company offers opportunities to help employees achieve their career and personal goals while enabling a healthy and balanced life.

About the Role

Radisson Hotel Group, a global hospitality leader with a presence in over 95 countries, is seeking an Air Conditioning Technician for its operations in Riyadh, Saudi Arabia. This role is essential for maintaining the comfort and safety of guests and staff by ensuring the efficient operation of air conditioning and cooling systems. The position aligns with the Group's commitment to excellence and guest satisfaction, bringing its core promise, "Every Moment Matters," to life through its people.

Key Responsibilities

• Install, inspect, maintain, and repair air conditioning systems and related equipment to ensure optimal functionality.
• Perform scheduled preventive maintenance tasks to minimize downtime and prevent potential issues.
• Diagnose faults and troubleshoot mechanical and electrical problems within HVAC systems.
• Replace defective components and ensure all systems are functioning at peak performance.
• Monitor refrigerant levels and handle refrigerants safely and in accordance with all applicable regulations.
• Test and calibrate HVAC equipment and controls to ensure accuracy and efficiency.
• Respond promptly to maintenance requests and emergency breakdowns to resolve issues swiftly.
• Maintain accurate and detailed records of all maintenance activities and repairs performed.
• Ensure strict compliance with all health, safety, and environmental standards and regulations.
• Coordinate effectively with supervisors and other members of the maintenance team to achieve departmental goals.

Qualifications and Requirements

• Diploma or Technical Certificate in Air Conditioning, Refrigeration, HVAC, or a closely related field.
• Previous experience in air conditioning maintenance and repair is required.
• Solid knowledge of HVAC systems, electrical circuits, and refrigeration principles.
• Ability to read and interpret technical drawings and manuals.
• Good troubleshooting and problem-solving skills to identify and resolve technical issues.
• Basic communication skills in English to understand instructions and communicate effectively.

Required Skills

• Proficiency in both preventive and corrective maintenance procedures for HVAC systems.
• Strong capabilities in fault diagnosis and troubleshooting of mechanical and electrical issues.
• Experience with equipment installation and testing to ensure proper setup and functionality.
• Effective time management skills to prioritize tasks and meet deadlines.
• Ability to work collaboratively as part of a team.
• High level of safety awareness and commitment to compliance with safety regulations.

Work Environment and Experience

This is a full-time position based in Riyadh, Saudi Arabia. Candidates with 0-1 years of experience are welcome to apply. Radisson Hotel Group offers a dynamic work environment where contributions are valued, providing opportunities for career growth and development within a strong team spirit. The company is committed to providing necessary adjustments during the application process and welcomes applicants from all backgrounds, abilities, and experiences.

About the Role

W Hotels in Riyadh, Saudi Arabia, is seeking a Maintenance Technician to join the Engineering and Facilities team. This is a full-time, non-supervisory position, offering an opportunity for individuals with 0 to 1 year of experience to contribute to the seamless operation of a luxury hotel environment. Your role will be crucial in ensuring guest satisfaction through the prompt and efficient resolution of maintenance issues and proactive upkeep of hotel facilities.

Job Responsibilities

• Respond to guest repair requests and resolve them promptly and efficiently.
• Communicate effectively with guests and customers to resolve maintenance issues.
• Perform preventive maintenance on tools, kitchen equipment, and mechanical room equipment, including cleaning and lubrication.
• Visually inspect tools, equipment, and machines to ensure they are in proper working order.
• Transport equipment, such as tools and radios, as needed for maintenance tasks.
• Locate and operate all shut-off valves for equipment and facility shut-offs for buildings.
• Maintain maintenance inventory and order necessary parts and supplies.
• Communicate daily activities and any issues that arise with other shifts using approved communication programs and standards.
• Perform surface preparation, painting, minor drywall repairs, trim carpentry, and replace light bulbs and air conditioner filters.
• Ensure thorough cleaning of painting or repair areas.
• Test, diagnose, and perform basic repairs on all types of equipment, including plumbing (*, clearing toilets and drains), electrical components (light bulbs, switches, outlets, extension cords, internet devices), cosmetic elements, and other guest room items.
• Program televisions and perform general duties related to cleaning and engineering inventory.
• Utilize the Lockout/Tagout system before performing any maintenance work.
• Perform repairs on interior and exterior landscaping, including exterior landscape sprinklers.
• Enter air handler schedules and make temperature adjustments using basic computer skills.
• Follow all company policies, safety, and security procedures.
• Report any maintenance issues, safety hazards, accidents, or injuries.
• Complete safety training and certifications.
• Properly store flammable materials.
• Ensure uniform and personal appearance are clean and professional.
• Maintain the confidentiality of private information and protect company assets.
• Welcome and acknowledge all guests according to company standards.
• Anticipate and address guest service needs.
• Assist individuals with disabilities.
• Thank guests with genuine appreciation.
• Adhere to quality expectations and standards.
• Develop and maintain positive working relationships with others.
• Support the team to achieve common goals.
• Listen and respond appropriately to the concerns of other employees.
• Speak to others using clear and professional language.
• Move, lift, carry, push, pull, and place objects weighing 50 pounds or less without assistance, and heavier tasks with assistance.
• Climb up and down stairs, service ramps, and/or ladders.
• Reach above head and below knees, including bending, twisting, pulling, and stooping.
• Enter and retrieve work-related information using computers.
• Perform other reasonable job duties as requested.

Qualifications and Requirements

• High school diploma or equivalent (*****
• Some experience in general maintenance, exterior and interior surface preparation, and painting.
• Experience in hotel engineering or maintenance is a plus.
• No supervisory experience required.
• Valid driver's license.

Required Skills

• HVAC and Refrigeration
• Electrical
• Mechanical
• Plumbing
• Pneumatic/Electronic Systems and Controls
• Carpentry and Finishing Skills
• Kitchen Equipment
• Vehicles
• Energy Conservation
• General Building Maintenance
• Painting
• Drywall Repair
• Trim Carpentry Repair
• Computer Skills
• Communication
• Teamwork
• Problem Solving

Work Environment and Location

This is a full-time, non-supervisory position located in Riyadh, Saudi Arabia. Working within the global W Hotels family is characterized by a "Whatever/Whenever" spirit, reflecting a vibrant lifestyle, exploring new passions, and maintaining an open mind. This role is ideal for someone with a unique vision and entrepreneurial spirit, ready to explore endless possibilities and redefine the standard for luxury hotels worldwide.

About the Role

Career Overseas Consultants Ltd. is seeking a skilled Air Conditioner & Refrigerator Technician for a full-time position in Riyadh, Saudi Arabia. This role is focused on contributing to the maintenance and operational efficiency of essential cooling and refrigeration systems.

Key Responsibilities

• Install, commission, and test air conditioning and refrigeration systems.
• Perform comprehensive preventive and corrective maintenance on HVAC and refrigeration equipment.
• Diagnose and repair electrical, mechanical, and control system faults.
• Inspect and service critical components including compressors, condensers, evaporators, expansion valves, thermostats, and fan motors.
• Conduct refrigerant charging, recovery, leak detection, and pressure testing according to industry best practices.
• Interpret technical drawings, wiring diagrams, and equipment manuals to guide repair and maintenance activities.
• Monitor system performance, identify potential issues, and recommend improvements for operational efficiency.
• Replace defective parts and components to ensure system integrity and functionality.
• Ensure all maintenance activities comply with established safety regulations and environmental standards.
• Maintain accurate maintenance records and prepare comprehensive service reports.
• Respond promptly to emergency breakdowns and perform troubleshooting to minimize downtime.
• Coordinate with supervisors and other maintenance personnel for timely task completion.

Qualifications and Requirements

• Technical Diploma, Trade Certificate, or Vocational Training in Air Conditioning & Refrigeration Technology.
• A minimum of 2 to 5 years of relevant work experience.
• Preferred experience in Training Institutes, Engineering Firms, Real Estate, or Developer sectors.
• A relevant HVAC Technician Certification.
• A Refrigeration & Air Conditioning Trade Certificate.
• Completed an Occupational Health & Safety Training Certificate.
• Sound knowledge of HVAC and refrigeration systems, their components, and control mechanisms.
• Ability to troubleshoot electrical and mechanical equipment effectively.
• Familiarity with refrigerants, recovery procedures, and associated safety practices.
• Ability to read and understand technical manuals and wiring diagrams.
• Good communication and teamwork skills.
• Strong problem-solving and analytical abilities.
• Capability to work under pressure and meet demanding maintenance schedules.
• Willingness to work at heights, in confined spaces, and under varying weather conditions.
• Physical capability to lift and carry tools, equipment, and spare parts.
• Physical fitness to perform all necessary maintenance and repair activities.

Required Skills

• Installation, commissioning, and testing of air conditioning and refrigeration systems.
• Preventive and corrective maintenance of HVAC and refrigeration equipment.
• Diagnosis and repair of electrical, mechanical, and control system faults.
• Inspection and servicing of key system components.
• Refrigerant handling, including charging, recovery, leak detection, and pressure testing.
• Interpretation of technical drawings, wiring diagrams, and equipment manuals.
• System performance monitoring and efficiency improvement recommendations.
• Component replacement and repair.
• Adherence to safety regulations and environmental standards.
• Maintenance record-keeping and service reporting.
• Emergency breakdown response and troubleshooting.
• Coordination with maintenance teams.
• Proficiency in HVAC and Refrigeration principles.
• Troubleshooting electrical and mechanical equipment.
• Knowledge of refrigerants and safety practices.
• Ability to interpret technical manuals and wiring diagrams.
• Effective communication and teamwork.
• Strong problem-solving and analytical skills.
• Ability to work under pressure and meet schedules.
• Willingness to work in challenging environments including heights and confined spaces.

Work Environment and Details

This is a full-time position based in Riyadh, Saudi Arabia. The role involves hands-on work within the field of air conditioning and refrigeration maintenance.

About the Role

Initial Facilities Management is seeking a skilled and dedicated HVAC Technician to join our team in Riyadh, Saudi Arabia. The primary purpose of this role is to ensure the efficient installation, maintenance, and repair of all heating, ventilation, and air conditioning (HVAC) systems. You will play a crucial part in maintaining optimal system performance, ensuring reliability, and upholding stringent safety and quality standards across our facilities. This full-time position offers an excellent opportunity for an experienced professional to contribute to a dynamic facilities management environment. We are looking for an individual with a strong work ethic and a commitment to delivering high-quality service.

Key Responsibilities

• Install, service, and maintain various HVAC systems, including central air conditioning units and split units.
• Conduct routine inspections of HVAC systems to verify proper operation and identify potential issues.
• Diagnose technical faults within HVAC systems and perform necessary repairs in a timely and effective manner.
• Maintain accurate and detailed service and maintenance reports for all work performed.
• Adhere strictly to all health and safety procedures and regulations during the execution of duties.
• Collaborate effectively with the operations team to ensure the uninterrupted service and functionality of HVAC systems.

Qualifications and Experience

• Previous proven experience working as an HVAC Technician.
• Demonstrated ability to troubleshoot and repair technical issues related to HVAC systems.
• A strong sense of discipline and a commitment to fulfilling work responsibilities.
• Experience required: 5-10 years.

Required Skills

• Proficiency in the installation, maintenance, and repair of HVAC systems.
• Expertise with both split AC and central AC systems.
• Strong troubleshooting capabilities for diagnosing and resolving HVAC issues.
• Skilled in performing necessary repairs to ensure system functionality.
• Competence in routine maintenance procedures for HVAC equipment.
• Experience in the installation of HVAC components and systems.
• Thorough understanding and application of health and safety procedures.
• Ability to generate and maintain accurate service and maintenance reports.
• Effective communication skills for coordination and reporting.

Work Location and Type

This is a full-time position based in Riyadh, Saudi Arabia.

About the Role

W Hotels in Riyadh, Saudi Arabia, is looking for a Maintenance professional to join the Engineering and Facilities team. This is a full-time, non-management position, offering an opportunity to contribute to the smooth operation of a luxury hotel environment. The work location is in Riyadh's Financial District.

Job Responsibilities

• Respond to and attend to guest repair requests promptly and efficiently.
• Communicate effectively with guests and customers to resolve maintenance issues.
• Perform preventive maintenance on tools, kitchen appliances, and mechanical room equipment, including cleaning and lubrication.
• Visually inspect tools, equipment, and machines to ensure they are in proper working order.
• Carry equipment, such as tools and radios, as required by work assignments.
• Identify the location and operate all shut-off valves for equipment and the shut-off systems for building facilities.
• Maintain an accurate inventory of maintenance and order parts and supplies as needed.
• Report daily activities and any issues that occur to other shifts using approved communication programs and standards.
• Perform surface preparation, painting, and minor drywall and wood trim repairs, and replace light bulbs and A/C filters.
• Ensure complete and thorough cleaning of painting or repair areas.
• Test, troubleshoot, and perform basic repairs on various equipment, including plumbing (*, toilet stoppers, opening clogged drains), electrical components (light bulbs, switches, outlets, extension cords, internet devices), cosmetic items, and other guest room items.
• Program televisions and perform general inventory duties related to housekeeping and engineering.
• Use the Lockout/Tagout system before performing any maintenance work.
• Perform interior and exterior landscape repairs, including exterior landscape sprinklers.
• Enter air handler schedules and make temperature adjustments using basic computer skills.
• Follow all company, safety, and security policies and procedures.
• Report any maintenance issues, safety hazards, accidents, or injuries.
• Complete safety training and certifications as required.
• Store flammable materials properly.
• Ensure uniform and personal appearance are clean and professional.
• Maintain the confidentiality of proprietary information and protect company assets.
• Welcome and acknowledge all guests according to company standards.
• Anticipate and address guest service needs.
• Assist individuals with disabilities.
• Thank guests with genuine appreciation.
• Comply with quality expectations and standards.
• Develop and maintain positive working relationships with others.
• Support the team to achieve common goals.
• Listen and respond appropriately to the concerns of other employees.
• Speak to others in a clear and professional manner.
• Move, lift, carry, push, pull, and place objects weighing 50 pounds or less without assistance, and heavier tasks with assistance.
• Move up and down stairs, service ramps, and/or ladders.
• Reach above the head and below the knees, including bending, twisting, pulling, and stooping.
• Enter and retrieve work-related information using computers.
• Perform other reasonably assigned job duties.

Qualifications and Requirements

• High school diploma or equivalent.
• Some experience in general maintenance, interior and exterior surface preparation, and painting.
• Experience in hotel engineering or maintenance is a plus.
• No supervisory experience required.
• Possession of a valid driver's license.

Required Skills

• Air Conditioning and Refrigeration
• Electrical
• Mechanical
• Plumbing
• Pneumatic/Electronic Systems and Controls
• Carpentry and Finishing Skills
• Knowledge of Kitchen Appliances
• Understanding of Vehicle Maintenance
• Energy Conservation Principles
• General Building Maintenance
• Painting
• Drywall Repair
• Wood Trim Repair
• Basic Computer Skills
• Communication
• Problem Solving
• Teamwork

Job Details

This is a full-time, non-management position located in Riyadh's Financial District, Saudi Arabia. The job requires 0-1 years of experience.

About the Electrical Technician Role

Water & Environment Technologies Co., Ltd. (WETCO), part of Abunayyan Holding, is seeking an experienced Electrical Technician to join its O&M Services team in Riyadh, Saudi Arabia. This full-time position is essential for ensuring the safe, reliable, and efficient operation of water treatment facilities. The role involves comprehensive maintenance, troubleshooting, and repair of electrical systems and associated equipment, directly contributing to the delivery of water and environmental solutions.

Key Responsibilities

• Perform preventive and corrective maintenance on electrical systems, including MCC panels, LV/MV switchgear, circuit breakers, motor starters, VFDs, distribution boards, protection relays, and cable systems.
• Diagnose and troubleshoot electrical and control system faults, addressing issues such as PLC/SCADA alarms, VFD malfunctions, instrumentation failures, and power supply anomalies.
• Conduct maintenance and repair of electric motors, process pumps, mechanical seals, and bearings.
• Calibrate and troubleshoot process instrumentation, including flow, level, pressure, pH, conductivity, DO, turbidity, and chlorine analyzers.
• Maintain and repair motorized, pneumatic, solenoid, and electro-hydraulic actuated valves.
• Support the maintenance and basic configuration of SCADA/HMI systems, PLCs, RTUs, and communication networks (Modbus, Profibus, Ethernet).
• Execute electrical installation activities, including cable terminations, earthing systems, conduit and cable tray installations, and maintenance of equipment in hazardous areas.
• Maintain accurate maintenance records and work orders using CMMS platforms such as SAP PM or IBM Maximo.
• Ensure strict compliance with all Health, Safety, and Environment (HSE) requirements, including LOTO procedures, permit-to-work systems, and applicable electrical regulations.

Required Qualifications

• Vocational Diploma in Electrical Engineering or an equivalent qualification.
• A minimum of 10 years of hands-on experience in electrical maintenance within industrial facilities.
• Strong knowledge of electrical systems, motors, industrial control panels, and water treatment facilities.
• Proven experience with MV/LV switchgear, motor control systems, PLCs, SCADA, and process instrumentation.
• Familiarity with SASO/SEC standards and relevant electrical safety regulations.

Essential Skills and Competencies

• Advanced troubleshooting and analytical skills.
• Effective communication and strong teamwork abilities.
• A steadfast commitment to safety and operational excellence.
• Ability to work effectively in a site-based environment and manage maintenance priorities.
• Proficiency in maintaining and troubleshooting MCC panels, LV/MV switchgear, circuit breakers, motor starters, VFDs, distribution boards, protection relays, and cable systems.
• Experience with diagnosing PLC/SCADA alarms, VFD issues, instrumentation failures, and power supply anomalies.
• Skilled in the maintenance and repair of electric motors, process pumps, mechanical seals, and bearings.
• Competency in calibrating and troubleshooting flow, level, pressure, pH, conductivity, DO, turbidity, and chlorine analyzers.
• Expertise in maintaining and troubleshooting motorized, pneumatic, solenoid, and electro-hydraulic actuated valves.
• Experience with SCADA systems, HMI systems, PLCs, RTUs, and communication protocols including Modbus, Profibus, and Ethernet.
• Proficiency in electrical installation tasks such as cable terminations, earthing systems, conduit and cable tray installations, and hazardous area equipment maintenance.
• Experience with CMMS platforms such as SAP PM or IBM Maximo.
• Thorough understanding of HSE requirements, LOTO procedures, permit-to-work systems, and general electrical regulations.
• Knowledge of electrical systems, motors, industrial control panels, and water treatment facilities.
• Familiarity with MV/LV switchgear, motor control systems, PLCs, SCADA, and process instrumentation.
• Understanding of SASO/SEC standards and electrical safety regulations.

Work Location and Type

This is a full-time position based in Riyadh, Saudi Arabia.

About the Role

W Hotels is seeking a dedicated Maintenance professional to join its team in Riyadh, Saudi Arabia. This full-time, non-management position offers an opportunity to contribute to the guest experience by ensuring the smooth operation and upkeep of hotel facilities. As part of the Marriott International family, this role is instrumental in upholding the brand's reputation for luxury and innovation.

This role involves responding to guest requests, performing routine maintenance, and ensuring all hotel systems and equipment are functioning optimally. The Maintenance professional will play a crucial part in maintaining a safe, comfortable, and aesthetically pleasing environment for guests and associates.

Key Responsibilities

• Respond to and attend to guest repair requests promptly and efficiently.
• Communicate effectively with guests and colleagues to resolve maintenance issues.
• Perform preventive maintenance on tools, kitchen equipment, and mechanical room equipment, including cleaning and lubrication.
• Visually inspect tools, equipment, and machines to ensure proper functioning.
• Carry equipment, such as tools and radios, as needed to complete tasks.
• Identify, locate, and operate all shut-off valves for equipment and utility shut-offs for buildings.
• Maintain maintenance inventory and requisition parts and supplies as necessary.
• Communicate daily activities and any occurring problems to other shifts using approved communication programs and standards.
• Perform surface preparation, painting, minor drywall and wood trim repair, and light bulb and A/C filter replacement.
• Ensure thorough cleanup of painting or repair areas.
• Test, troubleshoot, and perform basic repairs on various equipment, including plumbing (*, plunging toilets, unclogging drains), electrical components (lamps, switches, outlets, extension cords), cosmetic items, internet devices, and other guestroom items.
• Program televisions and perform general housekeeping and engineering-related inventory duties.
• Utilize the Lockout/Tagout system before performing any maintenance work.
• Perform repairs on interior and exterior landscaping, including sprinkler systems.
• Input air handler schedules and make temperature adjustments using basic computer skills.
• Adhere to all company and safety and security policies and procedures.
• Report any maintenance problems, safety hazards, accidents, or injuries.
• Complete safety training and certifications.
• Properly store flammable materials.
• Ensure uniform and personal appearance are clean and professional.
• Maintain confidentiality of proprietary information and protect company assets.
• Welcome and acknowledge all guests according to company standards.
• Anticipate and address guests' service needs.
• Assist individuals with disabilities.
• Thank guests with genuine appreciation.
• Adhere to quality expectations and standards.
• Develop and maintain positive working relationships with others.
• Support the team to reach common goals.
• Listen and respond appropriately to the concerns of other employees.
• Speak with others using clear and professional language.
• Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance, and heavier tasks with assistance.
• Move up and down stairs, service ramps, and/or ladders.
• Reach overhead and below the knees, including bending, twisting, pulling, and stooping.
• Enter and locate work-related information using computers.
• Perform other reasonable job duties as requested.

Qualifications and Requirements

• High school diploma or *** equivalent.
• Some experience in general maintenance, including exterior and interior surface preparation and painting.
• Experience in hotel engineering or maintenance is a plus.
• No supervisory experience required.
• Possession of a valid Driver's License.

Required Skills

• Air Conditioning and Refrigeration
• Electrical Systems
• Mechanical Systems
• Plumbing
• Pneumatic/Electronic Systems and Controls
• Carpentry and Finish Skills
• Kitchen Equipment Maintenance
• Vehicle Maintenance
• Energy Conservation
• General Building Maintenance
• Painting
• Drywall Repair
• Wood Trim Repair
• Landscaping
• Sprinkler Systems Maintenance
• Computer Skills
• Communication Skills
• Problem-Solving Abilities
• Teamwork

Work Environment and Details

This is a full-time, non-management position located at Area 1 Al Aqeeq Street Financial District, Riyadh, Saudi Arabia, 13519. The role requires 0-1 year of experience. Marriott International is an equal opportunity employer, committed to diversity and inclusion.

About the Role

W Hotels in Riyadh, Saudi Arabia, is seeking a Maintenance professional to join their Engineering & Facilities team. This full-time, non-management position is based in the Financial District of Riyadh and is not remote. The role offers an opportunity for individuals with 0-1 years of experience to contribute to the smooth operation of a luxury hotel environment.

As a Maintenance professional, you will be responsible for ensuring guest satisfaction by promptly addressing and resolving maintenance issues. You will also play a crucial role in the preventive maintenance of hotel equipment and facilities, contributing to a safe, comfortable, and well-maintained environment for guests and staff.

Key Responsibilities

• Respond to and attend to guest repair requests in a timely and efficient manner.
• Communicate effectively with guests and customers to resolve maintenance issues.
• Perform preventive maintenance on tools, kitchen equipment, and mechanical room equipment, including cleaning and lubrication.
• Visually inspect tools, equipment, and machines to ensure proper functioning.
• Carry equipment, such as tools and radios, as required for job duties.
• Identify, locate, and operate all shut-off valves for equipment and utility shut-offs for buildings.
• Maintain the maintenance inventory and requisition parts and supplies as needed.
• Communicate daily activities and any occurring problems to other shifts using approved communication programs and standards.
• Perform surface preparation, painting, minor drywall and wood trim repair, and light bulb and A/C filter replacement.
• Ensure thorough cleanup of painting or repair areas.
• Test, troubleshoot, and perform basic repairs on various equipment, including plumbing (*, plunging toilets, unclogging drains), electrical components (lamps, switches, outlets, extension cords), cosmetic items, internet devices, and other guestroom items.
• Program televisions and perform general housekeeping and engineering-related inventory duties.
• Utilize the Lockout/Tagout system before performing any maintenance work.
• Perform repairs on interior and exterior landscaping, including sprinkler systems.
• Input air handler schedules and make temperature adjustments using basic computer skills.
• Follow all company and safety and security policies and procedures.
• Report any maintenance problems, safety hazards, accidents, or injuries.
• Complete safety training and certifications as required.
• Properly store flammable materials.
• Ensure uniform and personal appearance are clean and professional.
• Maintain confidentiality of proprietary information and protect company assets.
• Welcome and acknowledge all guests according to company standards.
• Anticipate and address guests' service needs.
• Assist individuals with disabilities.
• Thank guests with genuine appreciation.
• Adhere to quality expectations and standards.
• Develop and maintain positive working relationships with others.
• Support the team to reach common goals.
• Listen and respond appropriately to the concerns of other employees.
• Speak with others using clear and professional language.
• Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance, and heavier tasks with assistance.
• Move up and down stairs, service ramps, and/or ladders.
• Reach overhead and below the knees, including bending, twisting, pulling, and stooping.
• Enter and locate work-related information using computers.
• Perform other reasonable job duties as requested.

Qualifications and Requirements

• High school diploma or *** equivalent.
• Some experience in general maintenance, including exterior and interior surface preparation and painting.
• Experience in hotel engineering or maintenance is a plus.
• No supervisory experience required.
• Valid Driver's License.

Required Skills

• Air Conditioning and Refrigeration
• Electrical Systems
• Mechanical Systems
• Plumbing
• Pneumatic/Electronic Systems and Controls
• Carpentry and Finish Skills
• Kitchen Equipment Maintenance
• Vehicle Maintenance
• Energy Conservation
• General Building Maintenance
• Painting
• Drywall Repair
• Wood Trim Repair
• Landscaping
• Sprinkler Systems
• Basic Computer Skills
• Communication Skills
• Teamwork
• Problem-Solving Abilities

Work Environment and Location

This is a full-time, non-management position located in the Financial District of Riyadh, Saudi Arabia. The role requires on-site presence and is not remote.

Marriott International is committed to being an equal opportunity employer, fostering an environment where diverse backgrounds are valued and celebrated. The company is committed to non-discrimination on any protected basis, including disability, veteran status, or other legally protected categories.

About the Role

Airbus Helicopters Arabia for Aircraft Maintenance is seeking a * Mechanical Licensed Engineer to join their mobile support team. This is a full-time, fixed-term position based in Riyadh, Saudi Arabia, requiring frequent travel across the Africa and Middle East (AME) region. The role involves serving as a front-line technical expert to provide crucial support to customer operations, ensuring the highest standards of safety and availability for heavy twin-engine helicopters in diverse environments.

Key Responsibilities

• Perform scheduled (Base/Line) and unscheduled maintenance, troubleshooting, and defect rectification on H225, Caracal, and Super Puma helicopter families.
• Deploy on short-notice missions to customer sites to provide essential technical assistance, Aircraft On Ground (AOG) support, and specialized repairs.
• Certify all maintenance work performed in strict accordance with EASA Part 145 standards or equivalent local Civil Aviation Authority regulations, and company Quality Management Systems.
• Act as a technical ambassador, providing guidance and support to customer maintenance teams to ensure operational continuity.
• Uphold a "Safety First" culture, ensuring all tooling, parts, and procedures meet rigorous aviation safety and quality standards.

Qualifications and Requirements

• Possess a valid EASA Part 66 * License or an equivalent certification.
• Hold current Type Ratings mandatory for H225 (EC225LP) and/or AS332 (L1, L2, C1).
• Have a minimum of 5 years of hands-on maintenance experience specifically on the H225, Caracal, and Super Puma helicopter types.
• Demonstrate high flexibility for frequent travel and short-term assignments across the Africa and Middle East region.
• Exhibit proficiency in English, both technically and spoken.

Skills and Competencies

• Extensive knowledge and practical experience with H225, Caracal, and Super Puma helicopters.
• Proficiency in troubleshooting and defect rectification procedures.
• Capability to provide effective AOG support and perform specialized repairs.
• Adherence to EASA Part 145 regulations and company Quality Management Systems.
• Strong customer liaison and communication skills.
• Commitment to maintaining a robust safety culture.
• Competence in tooling and parts management.
• Expertise in upholding aviation standards.
• Excellent problem-solving abilities.
• Demonstrated resilience in high-pressure environments.
• High degree of adaptability to diverse cultural and operational settings.
• Proven autonomy and the ability to make sound technical decisions independently.

Additional Information

French language proficiency is considered a significant advantage. Additional Type Ratings on other Airbus Helicopters (*, H145, H135, or AS365/H155) are considered a plus. Experience with military variants (Caracal/Cougar) and mission-specific equipment is advantageous. Proven ability to work independently in remote or austere environments is highly valued. This role requires an awareness of potential compliance risks and a commitment to act with integrity.

About the Role

Ninja is seeking a skilled Electrician to join its warehouse operations team in Riyadh, Saudi Arabia. The successful candidate will play a vital role in ensuring the safe, reliable, and efficient operation of electrical systems, equipment, and facility infrastructure. This position is crucial for minimizing downtime and supporting business continuity within the warehouse environment.

Key Tasks and Responsibilities

• Diagnose and repair electrical faults in facility equipment and systems.
• Troubleshoot and repair electrical systems, including motors, control panels, and wiring.
• Respond promptly to maintenance requests and equipment malfunctions.
• Perform scheduled preventive maintenance activities to ensure optimal equipment performance.
• Inspect electrical panels, wiring systems, and electrical equipment for potential issues.
• Replace faulty electrical components and ensure their proper functionality.
• Adhere to all electrical safety procedures and HSE (Health, Safety, and Environment) standards.
• Utilize appropriate tools, testing equipment, and personal protective equipment (PPE).
• Assist in the installation, testing, and commissioning of electrical systems and equipment.
• Support facility expansion, modification, and upgrade projects as needed.
• Maintain accurate maintenance records, reports, and work orders.
• Report recurring issues and recommend corrective actions and improvements to enhance system reliability.

Qualifications and Requirements

• Diploma in Electrical Technology, Electrical Engineering, Industrial Electricity, or a related field.
• Minimum of 2 to 4 years of experience in electrical maintenance.
• Experience in warehouse, logistics facilities, industrial environments, or commercial buildings is preferred.
• Strong knowledge of electrical systems, motors, control panels, wiring, and troubleshooting techniques.
• Familiarity with preventive maintenance practices.
• Understanding of electrical safety standards and regulations.
• A valid electrician certification or license is preferred.

Core Skills

• Electrical Maintenance
• Electrical Troubleshooting
• Repair
• Preventive Maintenance
• Electrical Safety Procedures
• HSE Standards
• Installation
• Testing
• Commissioning
• Maintenance Records

Work Environment and Location

This is a full-time position located in Riyadh, Saudi Arabia. The role requires 2 to 5 years of experience. Ninja is committed to maintaining a safe and efficient operating environment, and this role is integral to that commitment.

About the Role

Thales is seeking a Maintenance and NPI Technician to join its team in Riyadh, Saudi Arabia. With a significant presence in the Kingdom for 40 years and a team exceeding 600 employees, Thales is a key provider of advanced technological solutions across sectors including rail, air traffic management, and national security. This role is integral to ensuring the reliable, safe, and efficient operation of field equipment through effective maintenance and supporting new product introduction (NPI) initiatives, thereby upholding high standards of operational excellence and continuous improvement.

The primary objective of this position is to conduct comprehensive electrical and mechanical maintenance, support new product introduction activities, and contribute to ongoing improvement efforts, all while strictly adhering to safety and maintenance standards. The role is vital for ensuring the seamless operation of critical infrastructure and systems.

Key Responsibilities

• Diagnose and repair faults in electrical, mechanical, and electromechanical equipment.
• Execute scheduled preventive and corrective maintenance tasks.
• Report equipment issues, breakdowns, and recurring faults clearly and promptly to the Maintenance Manager.
• Utilize technical drawings, manuals, and diagnostic tools to perform maintenance activities with accuracy.
• Provide support for machinery installation, commissioning, and upgrades.
• Respond effectively to emergency breakdowns to minimize production downtime.
• Ensure strict compliance with safety procedures, including lockout/tagout (LOTO), and company policies.
• Accurately record all maintenance activities, spare parts usage, and equipment condition.
• Collaborate with engineers and supervisors to resolve complex technical issues.
• Support root-cause analysis of equipment failures and the implementation of corrective actions.
• Take responsibility for your own safety and the safety of others, as far as is practicable.
• Be aware of and actively participate in achieving Thales' HSE policy and objectives.
• Comply with local HSE laws and legislation.
• Use safety equipment, including Personal Protective Equipment (PPE), as required and intended.
• Lead by example and actively encourage departments to identify ways to conserve water and energy, minimize waste generation, and promote recycling.
• Exercise the right to stop work if you believe your activities may affect your health and safety or that of others, and report such conditions immediately to your line manager and the HSE department.

Qualifications and Requirements

• Proven experience as a Maintenance Technician.
• Strong knowledge of PC software.
• A keen willingness to learn new technologies.
• Hands-on experience with industrial machinery and production equipment.
• Strong troubleshooting skills using electrical and mechanical diagnostic tools.
• Knowledge of safety standards and maintenance best practices.
• Ability to work under pressure and respond effectively to emergency situations.
• Good teamwork and collaboration skills across maintenance, engineering, and operations teams.
• Willingness to learn and adapt to new technologies, tools, and equipment.
• Attention to detail and a commitment to accurate documentation.

Required Skills

• Electrical Maintenance
• Mechanical Maintenance
• Electromechanical Equipment
• Preventive Maintenance
• Corrective Maintenance
• Technical Drawings
• Diagnostic Tools
• Machinery Installation
• Commissioning
• Upgrades
• Emergency Breakdowns
• Safety Procedures
• Lockout/Tagout (LOTO)
• Root-Cause Analysis
• PC Software Proficiency
• Troubleshooting
• Industrial Machinery Operation
• Production Equipment Maintenance
• Safety Standards Compliance
• Maintenance Best Practices
• Working Under Pressure
• Teamwork and Collaboration
• Adaptability to New Technologies
• Attention to Detail
• Documentation Management
• Health, Safety, and Environment (HSE) Policy Adherence

Work Environment and Company Context

This is a full-time position based in Riyadh, Saudi Arabia. Thales, with 80,000 employees across 68 countries, emphasizes career development through its mobility policy, allowing employees to grow domestically and internationally. The company fosters a flexible approach to work.

1. We are looking for a creative electrical engineer to join our team, to contribute to the development and implementation of innovative electrical solutions. The successful candidate will be responsible for designing electrical systems, supervising their installation, and ensuring their efficient and safe operation. Key tasks include analyzing technical problems, providing engineering solutions, and collaborating with different work teams to achieve project goals.